I am using DVD Shrink & Decryptor to backup my DVD’s. After Shrink is done and it loads Decryptor I get the following error message. DeviceioControl FSCTL_Lock_Volume_Failed Device 1:0:0 Plextor DVDR – PX708A Unable to lock volume for exclusive access Reason: Incorrect Function Abort Retry Ignore At this point I hit Ignore and the programs continues as is nothing happened. Is a hardware error? – Is the drive unable to recognize the command. Any help would be appreciated. Thanks David
This is most commonly caused by packet writing apps such as InCD, DLA or Drag to Disc. Part of the way they work is to keep constant access to the drive so when another burning app needs to gain exclusive access to the drive it can't and the write process will be aborted. If you have any packet writing apps, uninstall them and see if that clears up your problem. If that doesn't work it could also be Windows built in IMAPI burning service which also likes to keep access to the drive. It's a useless app to begin with and even more so when you have dedicated burning software installed. IMAPI can be disabled by following these steps: Start > Control Panel > Administrative Tools > Services > Now scroll down to IMAPI CD-Burning COM Service and double click it. In the Properties window under the General tab look for the Startup Type drop down menu and select Disabled. Click OK and you're good to go. If, and only if, the steps above don't work you can set Decrypter to where it doesn't need to lock the drive by doing the following: Tools > Settings > ISO Write Mode > then uncheck "Lock Volume - Exclusive Access". By using this method you're possibly leaving yourself open to failed burns if another app interrupts the burn process. _X_X_X_X_X_[small] Got Indie? http://cdbaby.com/ My Movies! http://www.intervocative.com/dvdcollection.aspx/Rephaim Forum rules! http://forums.afterdawn.com/thread_view.cfm/2487[/small]
