This is a log file... if anyone can help me. +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ MUNJAL KRISHAKSHI XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-**** Windows 98 4.10 IA32 WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 23-Apr-99 10:22:00 PM ahead WinASPI: File 'C:\PROGRAM FILES\NERO\NERO 7\CORE\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02-Nov-04 1:54:32 PM Nero Version: 7.2.7.0 Internal Version: 7, 2, 7, 0 (Nero Express) Recorder: <TEAC CD-W58E> Version: 1.0A - HA 0 TA 1 - 7.2.7.0 Adapter driver: <ESDI_506> HA 0 Drive buffer : 1280kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <TEAC CD-W58E >Version: 1.0A - HA 0 TA 1 - 7.2.7.0 Adapter driver: <ESDI_506> HA 0 TEAC CD-W58E (Target 1, F: Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ? Excluded drive IDs: WriteBufferSize: 24117248 (0) Byte BUFE : 0 Physical memory : 127MB (130396kB) Free physical memory: 0MB (168kB) Memory in use : 100 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.3.2007 CD-ROM (ISO) 10:10:59 PM #1 Text 0 File Isodoc.cpp, Line 6440 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:11:00 PM #2 Text 0 File ThreadedTransfer.cpp, Line 540 ReadBuffer-Pipe got 23552KB of Memory 10:11:00 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 10:11:00 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:11:00 PM #5 Text 0 File Burncd.cpp, Line 3405 Turn on Track-At-Once, using CD-R/RW media 10:11:04 PM #6 Phase 40 File dlgbrnst.cpp, Line 1730 Aborted by user 10:11:04 PM #7 Text 0 File DlgWaitCD.cpp, Line 298 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 360706 ( 80:11.31) 10:11:04 PM #8 Text 0 File DlgWaitCD.cpp, Line 310 Write in overburning mode: NO (enabled: CD) 10:11:04 PM #9 Text 0 File DlgWaitCD.cpp, Line 2842 Recorder: TEAC CD-W58E Medium not present 10:11:04 PM #10 Text 0 File DlgWaitCD.cpp, Line 482 >>> Protocol of DlgWaitCD activities: <<< ========================================= Not enough free discspace. (Medium in drive: CD-R. Medium required by compilation: CD-R/RW.) Data to be written: 704 MB (739,035,136 bytes) Space available on the disc: 702 MB (736,970,752 bytes) Existing drivers: File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 23-Apr-99 10:22:00 PM File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11-Mar-02 11:55:38 AM File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 03-Apr-06 10:03:38 PM File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 03-Apr-06 10:03:38 PM File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 03-Apr-06 10:03:38 PM File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 23-Apr-99 10:22:00 PM File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 23-Apr-99 10:22:00 PM File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 12-Sep-03 11:45:22 PM File '..\System32\Drivers\1394bus.sys': Ver=4.10.2226, size=38016 bytes, created 07-Sep-00 4:59:06 PM File '..\System32\Drivers\Ohci1394.sys': Ver=4.10.2228, size=37040 bytes, created 08-Mar-01 5:29:14 PM File '..\System32\Drivers\Ntmap.sys': Ver=4.10.2227, size=8816 bytes, created 28-Jun-00 1:18:44 PM File 'IoSubsys\Ntmaphlp.pdr': Ver=4.10.2223, size=9849 bytes, created 12-Oct-99 2:56:42 PM File '..\System32\Drivers\Sbp2port.sys': Ver=4.10.2227, size=36528 bytes, created 11-Mar-02 9:38:02 AM File '..\System\Vmm32\Ios.vxd': Ver=4.10.2225, size=69594 bytes, created 09-Jan-01 2:08:04 PM File 'IoSubsys\Disktsd.vxd': Ver=4.10.2223, size=18889 bytes, created 17-Nov-99 5:36:48 PM Registry Keys: ====== *** Nero Burning ROM, History File *** ====== MUNJAL KRISHAKSHI 1C80-0000-19E5-MA2X-4000-5459-**** Windows 98 4.10 IA32 WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 23-Apr-99 10:22:00 PM ahead WinASPI: File 'C:\PROGRAM FILES\NERO\NERO 7\CORE\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02-Nov-04 1:54:32 PM Nero Version: 7.2.7.0 Internal Version: 7, 2, 7, 0 (Nero Express) Recorder: <TEAC CD-W58E> Version: 1.0A - HA 0 TA 1 - 7.2.7.0 Adapter driver: <ESDI_506> HA 0 Drive buffer : 1280kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <TEAC CD-W58E >Version: 1.0A - HA 0 TA 1 - 7.2.7.0 Adapter driver: <ESDI_506> HA 0 TEAC CD-W58E (Target 1, F: Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ? Excluded drive IDs: WriteBufferSize: 24117248 (0) Byte BUFE : 0 Physical memory : 127MB (130396kB) Free physical memory: 0MB (356kB) Memory in use : 100 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.3.2007 CD-ROM (ISO) 10:13:26 PM #1 Text 0 File Isodoc.cpp, Line 6440 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:13:26 PM #2 Text 0 File ThreadedTransfer.cpp, Line 540 ReadBuffer-Pipe got 23552KB of Memory 10:13:26 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 10:13:26 PM #4 Text 0 File Writer.cpp, Line 113 Writer F: TEAC CD-W58E running 10:13:26 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:13:26 PM #6 Text 0 File Burncd.cpp, Line 3405 Turn on Track-At-Once, using CD-R/RW media 10:13:26 PM #7 Text 0 File DlgWaitCD.cpp, Line 298 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 357749 ( 79:31.74) 10:13:26 PM #8 Text 0 File DlgWaitCD.cpp, Line 310 Write in overburning mode: NO (enabled: CD) 10:13:27 PM #9 Text 0 File DlgWaitCD.cpp, Line 2842 Recorder: TEAC CD-W58E; CDR code: 00 97 27 28; OSJ entry from: Princo Corporation ATIP Data: Special Info [hex] 1: F0 00 80, 2: 61 1B 1C (LI 97:27.28), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 10:13:27 PM #10 Text 0 File DlgWaitCD.cpp, Line 482 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:13:27 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 848 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 357750 (357750) = #357750/79:30.0 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 357748 blocks [F: TEAC CD-W58E] -------------------------------------------------------------- 10:13:27 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1063 Prepare recorder [F: TEAC CD-W58E] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 732979200, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 357750 | -150 | 0x00 0 | 1 | 1 | 0x41 | 357750 | 0 | 0x00 357750 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 10:13:27 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1133 Removed 2 run-out blocks from end of track 1. Length: 357750 -> 357748. 10:13:27 PM #14 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 10:13:27 PM #15 Text 0 File Burncd.cpp, Line 4236 Cache writing successful. 10:13:27 PM #16 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 10:13:27 PM #17 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 8x (1,200 KB/s) 10:13:27 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2722 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:13:42 PM #19 SCSI -1106 File SCSIInterface.cpp, Line 622 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x080F0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x03 10:13:42 PM #20 CDR -1106 File Writer.cpp, Line 302 Power calibration error F: TEAC CD-W58E 10:13:42 PM #21 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 10:13:45 PM #22 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 10:13:45 PM #23 CDR -201 File WriterStatus.cpp, Line 200 Invalid write state F: TEAC CD-W58E 10:13:45 PM #24 TRANSFER -18 File WriterStatus.cpp, Line 200 Could not perform EndTrack 10:13:46 PM #25 Text 0 File MMC.cpp, Line 16933 <TEAC CD-W58E > start Close Session 10:13:46 PM #26 SCSI -1176 File SCSIInterface.cpp, Line 366 SCSI Exec, HA 0, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x72 0x04 10:13:46 PM #27 CDR -1176 File WriterStatus.cpp, Line 250 Session fixation error F: TEAC CD-W58E 10:13:46 PM #28 TRANSFER -19 File WriterStatus.cpp, Line 250 Could not perform Fixation 10:13:46 PM #29 Text 0 File WriterStatus.cpp, Line 259 falling back to disc fixation 10:13:46 PM #30 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 8x (1,200 KB/s) Existing drivers: File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 23-Apr-99 10:22:00 PM File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11-Mar-02 11:55:38 AM File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 03-Apr-06 10:03:38 PM File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 03-Apr-06 10:03:38 PM File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 03-Apr-06 10:03:38 PM File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 23-Apr-99 10:22:00 PM File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 23-Apr-99 10:22:00 PM File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 12-Sep-03 11:45:22 PM File '..\System32\Drivers\1394bus.sys': Ver=4.10.2226, size=38016 bytes, created 07-Sep-00 4:59:06 PM File '..\System32\Drivers\Ohci1394.sys': Ver=4.10.2228, size=37040 bytes, created 08-Mar-01 5:29:14 PM File '..\System32\Drivers\Ntmap.sys': Ver=4.10.2227, size=8816 bytes, created 28-Jun-00 1:18:44 PM File 'IoSubsys\Ntmaphlp.pdr': Ver=4.10.2223, size=9849 bytes, created 12-Oct-99 2:56:42 PM File '..\System32\Drivers\Sbp2port.sys': Ver=4.10.2227, size=36528 bytes, created 11-Mar-02 9:38:02 AM File '..\System\Vmm32\Ios.vxd': Ver=4.10.2225, size=69594 bytes, created 09-Jan-01 2:08:04 PM File 'IoSubsys\Disktsd.vxd': Ver=4.10.2223, size=18889 bytes, created 17-Nov-99 5:36:48 PM Registry Keys: ====== *** Nero Burning ROM, History File *** ====== MUNJAL KRISHAKSHI 1C80-0000-19E5-MA2X-4000-5459-**** Windows 98 4.10 IA32 WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 23-Apr-99 10:22:00 PM ahead WinASPI: File 'C:\PROGRAM FILES\NERO\NERO 7\CORE\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02-Nov-04 1:54:32 PM Nero Version: 7.2.7.0 Internal Version: 7, 2, 7, 0 (Nero Express) Recorder: <TEAC CD-W58E> Version: 1.0A - HA 0 TA 1 - 7.2.7.0 Adapter driver: <ESDI_506> HA 0 Drive buffer : 1280kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <TEAC CD-W58E >Version: 1.0A - HA 0 TA 1 - 7.2.7.0 Adapter driver: <ESDI_506> HA 0 TEAC CD-W58E (Target 1, F: Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ? Excluded drive IDs: WriteBufferSize: 24117248 (0) Byte BUFE : 0 Physical memory : 127MB (130396kB) Free physical memory: 0MB (148kB) Memory in use : 100 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.3.2007 CD-ROM (ISO) 10:19:41 PM #1 Text 0 File Isodoc.cpp, Line 6440 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:19:42 PM #2 Text 0 File ThreadedTransfer.cpp, Line 540 ReadBuffer-Pipe got 23552KB of Memory 10:19:42 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 10:19:42 PM #4 Text 0 File Writer.cpp, Line 113 Writer F: TEAC CD-W58E running 10:19:42 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:19:42 PM #6 Text 0 File Burncd.cpp, Line 3405 Turn on Track-At-Once, using CD-R/RW media 10:19:42 PM #7 Text 0 File DlgWaitCD.cpp, Line 298 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 357749 ( 79:31.74) 10:19:42 PM #8 Text 0 File DlgWaitCD.cpp, Line 310 Write in overburning mode: NO (enabled: CD) 10:19:42 PM #9 Text 0 File DlgWaitCD.cpp, Line 2842 Recorder: TEAC CD-W58E; CDR code: 00 97 27 28; OSJ entry from: Princo Corporation ATIP Data: Special Info [hex] 1: F0 00 80, 2: 61 1B 1C (LI 97:27.28), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 10:19:42 PM #10 Text 0 File DlgWaitCD.cpp, Line 482 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:19:42 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 848 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 357750 (357750) = #357750/79:30.0 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 357748 blocks [F: TEAC CD-W58E] -------------------------------------------------------------- 10:19:42 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1063 Prepare recorder [F: TEAC CD-W58E] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 732979200, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 357750 | -150 | 0x00 0 | 1 | 1 | 0x41 | 357750 | 0 | 0x00 357750 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 10:19:42 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1133 Removed 2 run-out blocks from end of track 1. Length: 357750 -> 357748. 10:19:42 PM #14 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 10:19:42 PM #15 Text 0 File Burncd.cpp, Line 4236 Cache writing successful. 10:19:42 PM #16 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 10:19:42 PM #17 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 8x (1,200 KB/s) 10:19:42 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2722 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:19:57 PM #19 SCSI -1106 File SCSIInterface.cpp, Line 622 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x080F0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x03 10:19:57 PM #20 CDR -1106 File Writer.cpp, Line 302 Power calibration error F: TEAC CD-W58E 10:19:57 PM #21 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 10:19:59 PM #22 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 10:19:59 PM #23 CDR -201 File WriterStatus.cpp, Line 200 Invalid write state F: TEAC CD-W58E 10:19:59 PM #24 TRANSFER -18 File WriterStatus.cpp, Line 200 Could not perform EndTrack 10:19:59 PM #25 Text 0 File MMC.cpp, Line 16933 <TEAC CD-W58E > start Close Session 10:19:59 PM #26 SCSI -1176 File SCSIInterface.cpp, Line 366 SCSI Exec, HA 0, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x72 0x04 10:19:59 PM #27 CDR -1176 File WriterStatus.cpp, Line 250 Session fixation error F: TEAC CD-W58E 10:19:59 PM #28 TRANSFER -19 File WriterStatus.cpp, Line 250 Could not perform Fixation 10:19:59 PM #29 Text 0 File WriterStatus.cpp, Line 259 falling back to disc fixation 10:19:59 PM #30 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 8x (1,200 KB/s) Existing drivers: File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 23-Apr-99 10:22:00 PM File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11-Mar-02 11:55:38 AM File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 03-Apr-06 10:03:38 PM File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 03-Apr-06 10:03:38 PM File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 03-Apr-06 10:03:38 PM File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 23-Apr-99 10:22:00 PM File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 23-Apr-99 10:22:00 PM File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 12-Sep-03 11:45:22 PM File '..\System32\Drivers\1394bus.sys': Ver=4.10.2226, size=38016 bytes, created 07-Sep-00 4:59:06 PM File '..\System32\Drivers\Ohci1394.sys': Ver=4.10.2228, size=37040 bytes, created 08-Mar-01 5:29:14 PM File '..\System32\Drivers\Ntmap.sys': Ver=4.10.2227, size=8816 bytes, created 28-Jun-00 1:18:44 PM File 'IoSubsys\Ntmaphlp.pdr': Ver=4.10.2223, size=9849 bytes, created 12-Oct-99 2:56:42 PM File '..\System32\Drivers\Sbp2port.sys': Ver=4.10.2227, size=36528 bytes, created 11-Mar-02 9:38:02 AM File '..\System\Vmm32\Ios.vxd': Ver=4.10.2225, size=69594 bytes, created 09-Jan-01 2:08:04 PM File 'IoSubsys\Disktsd.vxd': Ver=4.10.2223, size=18889 bytes, created 17-Nov-99 5:36:48 PM Registry Keys: ====== *** Nero Burning ROM, History File *** ====== MUNJAL KRISHAKSHI 1C80-0000-19E5-MA2X-4000-5459-**** Windows 98 4.10 IA32 WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 23-Apr-99 10:22:00 PM ahead WinASPI: File 'C:\PROGRAM FILES\NERO\NERO 7\CORE\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02-Nov-04 1:54:32 PM Nero Version: 7.2.7.0 Internal Version: 7, 2, 7, 0 (Nero Express) Recorder: <TEAC CD-W58E> Version: 1.0A - HA 0 TA 0 - 7.2.7.0 Adapter driver: <ESDI_506> HA 0 Drive buffer : 1280kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <TEAC CD-W58E >Version: 1.0A - HA 0 TA 0 - 7.2.7.0 Adapter driver: <ESDI_506> HA 0 TEAC CD-W58E (Target 0, F: Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ? Excluded drive IDs: WriteBufferSize: 24117248 (0) Byte BUFE : 0 Physical memory : 127MB (130396kB) Free physical memory: 0MB (116kB) Memory in use : 100 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.3.2007 CD-ROM (ISO) 10:46:02 PM #1 Text 0 File Isodoc.cpp, Line 6440 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:46:03 PM #2 Text 0 File ThreadedTransfer.cpp, Line 540 ReadBuffer-Pipe got 23552KB of Memory 10:46:03 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 10:46:03 PM #4 Text 0 File Writer.cpp, Line 113 Writer F: TEAC CD-W58E running 10:46:03 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:46:03 PM #6 Text 0 File Burncd.cpp, Line 3405 Turn on Track-At-Once, using CD-R/RW media 10:46:03 PM #7 Text 0 File DlgWaitCD.cpp, Line 298 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 357749 ( 79:31.74) 10:46:03 PM #8 Text 0 File DlgWaitCD.cpp, Line 310 Write in overburning mode: NO (enabled: CD) 10:46:03 PM #9 Text 0 File DlgWaitCD.cpp, Line 2842 Recorder: TEAC CD-W58E; CDR code: 00 97 27 28; OSJ entry from: Princo Corporation ATIP Data: Special Info [hex] 1: F0 00 80, 2: 61 1B 1C (LI 97:27.28), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 10:46:03 PM #10 Text 0 File DlgWaitCD.cpp, Line 482 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:46:03 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 848 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 357750 (357750) = #357750/79:30.0 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 357748 blocks [F: TEAC CD-W58E] -------------------------------------------------------------- 10:46:03 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1063 Prepare recorder [F: TEAC CD-W58E] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 732979200, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 357750 | -150 | 0x00 0 | 1 | 1 | 0x41 | 357750 | 0 | 0x00 357750 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 10:46:03 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1133 Removed 2 run-out blocks from end of track 1. Length: 357750 -> 357748. 10:46:03 PM #14 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 10:46:03 PM #15 Text 0 File Burncd.cpp, Line 4236 Cache writing successful. 10:46:03 PM #16 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 10:46:03 PM #17 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 8x (1,200 KB/s) 10:46:03 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2722 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:46:21 PM #19 SCSI -1106 File SCSIInterface.cpp, Line 622 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x080F0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x03 10:46:21 PM #20 CDR -1106 File Writer.cpp, Line 302 Power calibration error F: TEAC CD-W58E 10:46:21 PM #21 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 10:46:24 PM #22 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 10:46:24 PM #23 CDR -201 File WriterStatus.cpp, Line 200 Invalid write state F: TEAC CD-W58E 10:46:24 PM #24 TRANSFER -18 File WriterStatus.cpp, Line 200 Could not perform EndTrack 10:46:24 PM #25 Text 0 File MMC.cpp, Line 16933 <TEAC CD-W58E > start Close Session 10:46:24 PM #26 SCSI -1176 File SCSIInterface.cpp, Line 366 SCSI Exec, HA 0, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x72 0x04 10:46:24 PM #27 CDR -1176 File WriterStatus.cpp, Line 250 Session fixation error F: TEAC CD-W58E 10:46:24 PM #28 TRANSFER -19 File WriterStatus.cpp, Line 250 Could not perform Fixation 10:46:24 PM #29 Text 0 File WriterStatus.cpp, Line 259 falling back to disc fixation 10:46:24 PM #30 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 8x (1,200 KB/s) Existing drivers: File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 23-Apr-99 10:22:00 PM File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11-Mar-02 11:55:38 AM File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 03-Apr-06 10:03:38 PM File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 03-Apr-06 10:03:38 PM File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 03-Apr-06 10:03:38 PM File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 23-Apr-99 10:22:00 PM File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 23-Apr-99 10:22:00 PM File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 12-Sep-03 11:45:22 PM File '..\System32\Drivers\1394bus.sys': Ver=4.10.2226, size=38016 bytes, created 07-Sep-00 4:59:06 PM File '..\System32\Drivers\Ohci1394.sys': Ver=4.10.2228, size=37040 bytes, created 08-Mar-01 5:29:14 PM File '..\System32\Drivers\Ntmap.sys': Ver=4.10.2227, size=8816 bytes, created 28-Jun-00 1:18:44 PM File 'IoSubsys\Ntmaphlp.pdr': Ver=4.10.2223, size=9849 bytes, created 12-Oct-99 2:56:42 PM File '..\System32\Drivers\Sbp2port.sys': Ver=4.10.2227, size=36528 bytes, created 11-Mar-02 9:38:02 AM File '..\System\Vmm32\Ios.vxd': Ver=4.10.2225, size=69594 bytes, created 09-Jan-01 2:08:04 PM File 'IoSubsys\Disktsd.vxd': Ver=4.10.2223, size=18889 bytes, created 17-Nov-99 5:36:48 PM Registry Keys: ====== *** Nero Burning ROM, History File *** ======
you do seem to have a few problems but i wouldnt worry about that power calibration error just yet.There are more important things to worry about. The dma setting needs to be turned back on Man are you using a dinosaur or something.You dont have enough system requirements to burn squat.You will need to have at least 512 meg of ram for starters.With out this there is no point even if you are able to burn this you are attempting to burn more than is possible to your disc, so get a bigger one Your operating system is really old , i would suggest you upgrade your whole pc.Its not even updated through microsofts online upgrades. princo arent the best discs and this comes into line with your calibration error, which is a result of poor media.You may have some success but over all you may consider changing to some thing a bit more durable like taiyo yuden, ritek or even sony.Princo are down there with memorex , i mean you'd have to be pretty desparate to use them I would be surprised if you actually got nero to work with your current system requirements, you really need to tackle an upgrade 1st before you do any burning...........