I have a problem writing to a CD-RW using any tool (Nero log is attached below). It started giving this problems few weeks ago. I seem to have the same problem even if I connect an external CDR/RW device too my computer. The problem is that the system copies all the files to a CD-RW and takes a long time during the lead in-lead out and close session and says it is complete, but then later if the system tries to read the files the system cannot read the file. CD-R disk work fine so do DVD-R's copied using the same drive it is only a problem with the CD-RW. I tried new service packs, reinstall burning software, machine reinstall etc. none of them corrected the problem. I tried 3 burning softwares, XP, Instant Copy, Nero and iTunes. All have the same problem Please note: the system can read CD-RW as well as without any problem the problem is only in writting to it. Help Please! Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'Crogram FilesAhead eroWnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.17 Recorder: <TOSHIBA DVD-ROM SD-R6012>Version: 1031 - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <TOSHIBA DVD-ROM SD-R6012>Version: 1031 - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK6021GAS atapi Port 0 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-R6012 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === TOSHIBA DVD-ROM SD-R6012 D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1047536kB) Free physical memory: 743MB (760884kB) Memory in use : 27 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.8.2004 CD-ROM (ISO) 9:14:20 PM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 9:14:20 PM #2 Phase 90 File dlgbrnst.cpp, Line 1845 Buffer Underrun Protection activated 9:14:20 PM #3 Text 0 File Reader.cpp, Line 118 Reader running 9:14:20 PM #4 Text 0 File Writer.cpp, Line 124 Writer TOSHIBA DVD-ROM SD-R6012 running 9:14:20 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 9:14:20 PM #6 Text 0 File Burncd.cpp, Line 3172 Turn on Track-at-once, using CD-R/RW media 9:14:20 PM #7 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 599 ( 0:09.74) 9:14:20 PM #8 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 9:14:20 PM #9 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: TOSHIBA DVD-ROM SD-R6012; CDRW code: 00 97 24 15; OSJ entry from: SONY Corporation ATIP Data: Special Info [hex] 1: E0 00 C0, 2: 61 18 0F (LI 97:24.15), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 9:14:20 PM #10 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:14:20 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 600 (600) = #600/0:8.0 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 598 blocks [TOSHIBA DVD-ROM SD-R6012] -------------------------------------------------------------- 9:14:20 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [TOSHIBA DVD-ROM SD-R6012] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1536000, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 600 | lead-out | 1 | 0x00 | 0x41 9:14:20 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030 Removed 2 run-out blocks from end of track 1. Length: 600 -> 598. 9:14:21 PM #14 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 9:14:21 PM #15 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 9:14:21 PM #16 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 9:14:21 PM #17 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 4x (600 KB/s) 9:14:21 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:14:21 PM #19 Text 0 File Mmc.cpp, Line 20401 Set BUFE: supported -> ON 9:14:27 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 9:14:30 PM #21 Text 0 File Mmc.cpp, Line 15226 <TOSHIBA DVD-ROM SD-R6012> start Close Session 9:15:51 PM #22 Phase 37 File dlgbrnst.cpp, Line 1845 Burn process completed successfully at 4x (600 KB/s) 9:15:51 PM #23 Phase 78 File dlgbrnst.cpp, Line 1845 Data verification started 9:16:36 PM #24 SCSI -1104 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03307000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x15 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x00 0x02 0x36 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x02 0x36 0x0A 0x00 0x00 0x00 0x00 0x15 0x00 9:16:45 PM #25 SCSI -1104 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03307000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x15 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x00 0x02 0x36 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x02 0x36 0x0A 0x00 0x00 0x00 0x00 0x15 0x00 9:16:45 PM #26 Text 0 File DriveFileSystemBlockReader.cpp, Line 231 Error during reading the sector: 566 9:16:53 PM #27 SCSI -1104 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03329000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x15 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x15 0x00 9:17:02 PM #28 SCSI -1104 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03329000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x15 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x15 0x00 9:17:02 PM #29 Text 0 File DriveFileSystemBlockReader.cpp, Line 231 Error during reading the sector: 0 9:17:10 PM #30 SCSI -1104 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03329000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x15 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x15 0x00 9:17:19 PM #31 SCSI -1104 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03329000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x15 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x15 0x00 9:17:19 PM #32 Text 0 File DriveFileSystemBlockReader.cpp, Line 231 Error during reading the sector: 0 9:17:19 PM #33 VERIFYERR 10 File UDFCompilationImpl.cpp, Line 1282 Cannot mount the written CD "TOSHIBA DVD-ROM SD-R6012" (H:1, T:0) 9:17:19 PM #34 VERIFYERR 13 File UDFCompilationImpl.cpp, Line 1380 Status summary Total files=0, identical=0, different=0, inaccessible=0, skipped=0. 9:17:19 PM #35 Phase 81 File dlgbrnst.cpp, Line 1845 Data verification failed Existing drivers: File 'Driversatapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 1:27:50 AM (Adapter driver for rec) Registry Keys: HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
I tried with 2 brands of CD-RW's - SONY and Imation. I had burnt quite a few CD-RW's with Imation disk on the same Drive earlier.
Hi, So, for the sake of clarity, this problem occurs even when you use and brand new never-before-written-to disc? Are you able to try the drive in another PC? We can isolate whether the problem is your drive or your system by doing so
DDP! (damn double post) _X_X_X_X_X_[small] "And there we saw the giants ... And we were in our own sight as grasshoppers, and so we were in their sight." Numbers 13:33[/small]
The drive is on a Laptop so I could not test it in another. However, I connected a USB based iomega CDR/RW drive and tried burning the CD-RW’s it too had the same problem. This iomega drive works to write on the Same CD-RW when connected to another PC.
Guess we can't test the drive in another PC If the Iomega messes up on your laptop as well it's definitely a problem with the system and not the drive itself. We may try a ASPI update. ASPI is basically a driver layer that sits between your drive and software. ForceASPI is a good one so here's a link to the download and instuctions: http://club.cdfreaks.com/showthread.php?t=101614 Let us know if this does the trick
Unfortunately, it does not :-(. I still get the problem with the new drivers installed. I tried both the internal and external drives. But are these drivers effective on XP. I saw only NT and Win9x info in the installer.
