1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Problem While Flashing my Motorola V3 RazR

Discussion in 'Motorola phones' started by DigitalSk, Aug 23, 2007.

  1. DigitalSk

    DigitalSk Regular member

    Joined:
    Sep 27, 2004
    Messages:
    224
    Likes Received:
    0
    Trophy Points:
    26
    Good Day,

    I was trying to flash my phone to unlock it with RSD Lite 2.4. My son jumped in my arms & the USB cable got disconnected while in progress. Now my phone has a black screen only when I turn it on.

    I tried reflashing it but in the Model section of RSD Lite I get: S Blank Neptune LTE insted of razr V3

    I had version 07.EO in my phone & I was trying to change it so I could unlock it. I have IMEI # if that can help..

    Can I do anything so I can at least turn it back on again so I can try the reflash again ?

    Regards,
    Dan
     
  2. DigitalSk

    DigitalSk Regular member

    Joined:
    Sep 27, 2004
    Messages:
    224
    Likes Received:
    0
    Trophy Points:
    26
    Does Anyone know if I can make it work again as it was not my phone :(

    Regards,
    Dan
     
    Last edited: Aug 24, 2007
  3. blivetNC

    blivetNC Regular member

    Joined:
    Nov 8, 2005
    Messages:
    2,380
    Likes Received:
    0
    Trophy Points:
    46
    This has worked for a couple of people who has bricked their phone, read carefully and make sure you understand each and every step involved. See if you can find someone who has a similar phone from the same carrier to pull a backup file from. Hope that this helps.
    http://www.motox.info/showthread.php?t=11727
     
  4. blivetNC

    blivetNC Regular member

    Joined:
    Nov 8, 2005
    Messages:
    2,380
    Likes Received:
    0
    Trophy Points:
    46
    A few things from the link:

    Things you will need prior to undertaking in this revival guide

    RFDI.shx (used to repair S Blank Neptune LTE or phones whos PDS is gone or corrupt)
    DO NOT FLASH THIS TO YOUR PHONE IF IT IS WORKING
    1.RFDI IMAGE.SHX
    2.SHXCodec
    3.R374_V3BL 07.D0.shx
    4.Current Monster Pack (your choice)
    5.Reflash file for firmware upgrade(not necessary but we might as well upgrade)
    6a. PDS.bin
    6b. Full Backup file---see step 3b for extraction method (only needed if you don’t have PDS.bin)
    7. PDS.shx template
    ----Do not flash just the template, it will kill your phone if you don't have a PDS backup to restore. You must first insert "your" PDS into the template, then flash.
    8. XVI32—used to extract the PDS from your full backup
    9. RAMldr – this can be used to put the PDS.bin file back on to the phone, however though since I really don’t want ppl using this method as it causes more problems, im not going to provide a link. Find it yourself.

    Here is everything you will need to recover your phone “MrBucket V3 Un-Brick Kit”
     
    Last edited: Aug 26, 2007
  5. DigitalSk

    DigitalSk Regular member

    Joined:
    Sep 27, 2004
    Messages:
    224
    Likes Received:
    0
    Trophy Points:
    26
    Hi, The problem is when I connect my phone via USB it says: USB DEVICE NOT RECOGNIZED: One of the usb device attached to this computer has malfunctioned, and Windows does not recognize it.

    Am I dead?

    Thanks,
    Dan


     

Share This Page