1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Probs with sony crx230e burn

Discussion in 'CD-R' started by mingualez, Jan 11, 2008.

  1. mingualez

    mingualez Member

    Joined:
    Jan 11, 2008
    Messages:
    26
    Likes Received:
    0
    Trophy Points:
    11
    I have used and burnt succesfully for a couple of years with light use.Using nero6 WMP pinnacle .Just recently the drive has had trouble reading discs in general sometimes blanks sometimes pre records, occasionally making my pc reboot!!I downloaded daemon tools light as i thought i may have software driver issue's. This didn't work at all, and since then i cannot write at all to disc. It goes through the process fine then errors at the point of actual burn.In wmp it will record and finalize approx 30 seconds of just 1 track . Nero and pinnacle just fail end of.
    I have updated the firmware , to no avail!uninstalled and rebooted none of which has worked.
    See Nero error report below-11.1.2008
    CD-ROM (MP3)
    13:36:41 #1 Text 0 File Isodoc.cpp, Line 6029
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : TAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    13:36:41 #2 Phase 96 File dlgbrnst.cpp, Line 1800
    Buffer underrun error protection activated

    13:36:41 #3 Text 0 File Reader.cpp, Line 118
    Reader running

    13:36:41 #4 Text 0 File Writer.cpp, Line 124
    Writer SONY CD-RW CRX230E running

    13:36:41 #5 ISO9660GEN -11 File geniso.cpp, Line 3882
    First writeable address = 0 (0x00000000)

    13:36:41 #6 Text 0 File Burncd.cpp, Line 3101
    Turn on Track-at-once, using CD-R/RW media

    13:36:41 #7 Text 0 File DlgWaitCD.cpp, Line 240
    Last possible write address on media: 359844 ( 79:59.69)
    Last address to be written: 154728 ( 34:25.03)

    13:36:41 #8 Text 0 File DlgWaitCD.cpp, Line 245
    Write in overburning mode: FALSE

    13:36:41 #9 Text 0 File DlgWaitCD.cpp, Line 2085
    Recorder: SONY CD-RW CRX230E;
    CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
    ATIP Data:
    Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
    Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

    13:36:41 #10 Text 0 File DlgWaitCD.cpp, Line 406
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    13:36:41 #11 Text 0 File ThreadedTransferInterface.cpp, Line 779
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 154729 (154729) = #154729/34:23.4
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 154727 blocks [SONY CD-RW CRX230E ]
    --------------------------------------------------------------

    13:36:41 #12 Text 0 File ThreadedTransferInterface.cpp, Line 948
    Prepare recorder [SONY CD-RW CRX230E ] for write in TAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 317192192, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    -150 | lead-in | 0 | 0x00 | 0x41
    -150 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    154729 | lead-out | 1 | 0x00 | 0x41

    13:36:41 #13 Text 0 File ThreadedTransferInterface.cpp, Line 994
    Removed 2 run-out blocks from end of track 1. Length: 154729 -> 154727.

    13:36:41 #14 Phase 24 File dlgbrnst.cpp, Line 1800
    Caching of files started

    13:36:41 #15 Text 0 File Burncd.cpp, Line 4073
    Cache writing successful.

    13:36:41 #16 Phase 25 File dlgbrnst.cpp, Line 1800
    Caching of files completed

    13:36:41 #17 Phase 36 File dlgbrnst.cpp, Line 1800
    Burn process started at 32x (4,800 KB/s)

    13:36:41 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2264
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    13:36:41 #19 Text 0 File Mmc.cpp, Line 19451
    Set BUFE: Buffer under-run error protection -> ON , SMART-BURN : ON

    13:37:37 #20 SCSI -1135 File Cdrdrv.cpp, Line 1431
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04830000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0xCC 0x60 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    13:37:37 #21 CDR -1135 File Writer.cpp, Line 301
    Write error

    13:37:37 #22 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    13:37:37 #23 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    13:37:37 #24 CDR -201 File WriterStatus.cpp, Line 196
    Invalid write state
    SONY CD-RW CRX230E\H1 T1

    13:37:37 #25 TRANSFER -18 File WriterStatus.cpp, Line 196
    Could not perform EndTrack

    13:37:37 #26 Text 0 File Mmc.cpp, Line 14287
    <SONY CD-RW CRX230E > start Close Session

    13:37:43 #27 SCSI -1176 File Cdrdrv.cpp, Line 1171
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x72
    Sense Qual: 0x00
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x72 0x00

    13:37:43 #28 CDR -1176 File WriterStatus.cpp, Line 245
    Session fixation error

    13:37:43 #29 TRANSFER -19 File WriterStatus.cpp, Line 245
    Could not perform Fixation

    13:37:43 #30 Text 0 File WriterStatus.cpp, Line 254
    falling back to disc fixation

    13:37:43 #31 Text 0 File Mmc.cpp, Line 14287
    <SONY CD-RW CRX230E > start Close Session

    13:37:43 #32 Text 0 File dlgbrnst.cpp, Line 1658
    Set remaining time: 0:00,000 (0ms) -> OK

    13:37:43 #33 Phase 38 File dlgbrnst.cpp, Line 1800
    Burn process failed at 32x (4,800 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 07/03/2007 23:51:00
    File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 07/03/2007 23:51:00 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  2. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,722
    Likes Received:
    1
    Trophy Points:
    96
  3. mingualez

    mingualez Member

    Joined:
    Jan 11, 2008
    Messages:
    26
    Likes Received:
    0
    Trophy Points:
    11
    Thanks cyprusrom. I ran the aspichk and it came back with no aspi or not properly installed. Whats my next step please. Couldn't find an option for killaspi???? THANKSAGAIN
     
  4. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,722
    Likes Received:
    1
    Trophy Points:
    96
    Last edited: Jan 16, 2008
  5. mingualez

    mingualez Member

    Joined:
    Jan 11, 2008
    Messages:
    26
    Likes Received:
    0
    Trophy Points:
    11
    yeeeeeeeesssssssssssssssssss. Thanks a million dude got WMP to work nero wouldn't but i guess i may need to reinstall it aye??
    had to use the force aspi in the end. I asume this should work with nero??
    regards
     
  6. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,722
    Likes Received:
    1
    Trophy Points:
    96
    Did you run the ASPICK after installation? Just to make sure your force aspi is installed correctly?

    What is the error you get with nero now? If you are still having problems with Nero, post an error log again. Sometimes Nero has problems when burning CDs due to the native IMAPI Windows CD burning software. Take a look at this thread:

    http://www.gidforums.com/t-1805.html


    Set IMAPI to manual. Also, keep your burner's firmware updated to be compatible with the media you use. Don't burn at maximum speed.
     
  7. mingualez

    mingualez Member

    Joined:
    Jan 11, 2008
    Messages:
    26
    Likes Received:
    0
    Trophy Points:
    11
    I initially used solution 1 and though it partly worked in wmp finalising just 14 of 16 tracks it didn't work at all in nero. I then used solution free ( force aspi) and it worked totally in wmp. However i haven't tried nero yet as i have no Rw discs and have used up a godd 15-20 cdr's over the last week trying to sort this out. I'll get some more and let youy know . Though I do suspect it will be ok.
    By the way I have noticed that nero is a bugger to uninstall totally, It appears to have removed but when you re-install it doesn't require user info,and still has some saved settings present ??? How do I remove it completely to start all over??
    Thanke a million for your help!!!!
    This was the error in nero after solution 1
    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 09:20:56
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 19:18:06
    Nero version: 6.3.0.2 (Nero Express)
    Recorder: <SONY CD-RW CRX230E> Version: QYS3 - HA 1 TA 1 - 6.3.0.2
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <SONY DVD-ROM DDU1612 >Version: DYS3 - HA 1 TA 0 - 6.3.0.2
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SONY DVD-ROM DDU1612 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SONY CD-RW CRX230E atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    SONY DVD-ROM DDU1612 D: CDRom0
    SONY CD-RW CRX230E E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 1022MB (1047024kB)
    Free physical memory: 594MB (608716kB)
    Memory in use : 41 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    18.1.2008
    CD-ROM (MP3)
    19:32:53 #1 Text 0 File Isodoc.cpp, Line 6029
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : TAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    19:32:53 #2 Phase 96 File dlgbrnst.cpp, Line 1800
    Buffer underrun error protection activated

    19:32:53 #3 Text 0 File Reader.cpp, Line 118
    Reader running

    19:32:53 #4 Text 0 File Writer.cpp, Line 124
    Writer SONY CD-RW CRX230E running

    19:32:53 #5 ISO9660GEN -11 File geniso.cpp, Line 3882
    First writeable address = 0 (0x00000000)

    19:32:53 #6 Text 0 File Burncd.cpp, Line 3101
    Turn on Track-at-once, using CD-R/RW media

    19:32:53 #7 Text 0 File DlgWaitCD.cpp, Line 240
    Last possible write address on media: 359844 ( 79:59.69)
    Last address to be written: 154728 ( 34:25.03)

    19:32:53 #8 Text 0 File DlgWaitCD.cpp, Line 245
    Write in overburning mode: FALSE

    19:32:53 #9 Text 0 File DlgWaitCD.cpp, Line 2085
    Recorder: SONY CD-RW CRX230E;
    CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
    ATIP Data:
    Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
    Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

    19:32:53 #10 Text 0 File DlgWaitCD.cpp, Line 406
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    19:32:53 #11 Text 0 File ThreadedTransferInterface.cpp, Line 779
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 154729 (154729) = #154729/34:23.4
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 154727 blocks [SONY CD-RW CRX230E ]
    --------------------------------------------------------------

    19:32:53 #12 Text 0 File ThreadedTransferInterface.cpp, Line 948
    Prepare recorder [SONY CD-RW CRX230E ] for write in TAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 317192192, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    -150 | lead-in | 0 | 0x00 | 0x41
    -150 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    154729 | lead-out | 1 | 0x00 | 0x41

    19:32:53 #13 Text 0 File ThreadedTransferInterface.cpp, Line 994
    Removed 2 run-out blocks from end of track 1. Length: 154729 -> 154727.

    19:32:53 #14 Phase 24 File dlgbrnst.cpp, Line 1800
    Caching of files started

    19:32:53 #15 Text 0 File Burncd.cpp, Line 4073
    Cache writing successful.

    19:32:53 #16 Phase 25 File dlgbrnst.cpp, Line 1800
    Caching of files completed

    19:32:53 #17 Phase 36 File dlgbrnst.cpp, Line 1800
    Burn process started at 32x (4,800 KB/s)

    19:32:53 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2264
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    19:32:53 #19 Text 0 File Mmc.cpp, Line 19451
    Set BUFE: Buffer under-run error protection -> ON , SMART-BURN : ON

    19:33:30 #20 SCSI -1135 File Cdrdrv.cpp, Line 1431
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04930000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x01 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    19:33:30 #21 CDR -1135 File Writer.cpp, Line 301
    Write error

    19:33:30 #22 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    19:33:30 #23 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    19:33:30 #24 CDR -201 File WriterStatus.cpp, Line 196
    Invalid write state
    SONY CD-RW CRX230E\H1 T1

    19:33:30 #25 TRANSFER -18 File WriterStatus.cpp, Line 196
    Could not perform EndTrack

    19:33:30 #26 Text 0 File Mmc.cpp, Line 14287
    <SONY CD-RW CRX230E > start Close Session

    19:33:39 #27 SCSI -1176 File Cdrdrv.cpp, Line 1171
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x72
    Sense Qual: 0x00
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x72 0x00

    19:33:39 #28 CDR -1176 File WriterStatus.cpp, Line 245
    Session fixation error

    19:33:39 #29 TRANSFER -19 File WriterStatus.cpp, Line 245
    Could not perform Fixation

    19:33:39 #30 Text 0 File WriterStatus.cpp, Line 254
    falling back to disc fixation

    19:33:39 #31 Text 0 File Mmc.cpp, Line 14287
    <SONY CD-RW CRX230E > start Close Session

    19:33:39 #32 Text 0 File dlgbrnst.cpp, Line 1658
    Set remaining time: 0:00,000 (0ms) -> OK

    19:33:39 #33 Phase 38 File dlgbrnst.cpp, Line 1800
    Burn process failed at 32x (4,800 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 07/03/2007 23:51:00
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02
    File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 07/03/2007 23:51:00 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  8. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,722
    Likes Received:
    1
    Trophy Points:
    96
    It is a pain in the arse trying to uninstall Nero. Should use Nero 6 Clean Tool:

    http://www.nero.com/enu/support-nero6-tools-utilities.html

    After you uninstall, install the latest version of nero 6/7.

    Remove this driver from your computer using Roxio Zap. It conflicts with Nero.

    http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml


    Get a different brand discs, get Sony, Verbatim.

    Try burning slower , X24.
     
  9. mingualez

    mingualez Member

    Joined:
    Jan 11, 2008
    Messages:
    26
    Likes Received:
    0
    Trophy Points:
    11
    Thanks for all your help it's been much appreciated.
    One last question hopefully?? LOL.
    If i remove the driver you quoted , would there maybe implications regarding the operation of other devices/programs???
    many thanks..
     
  10. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,722
    Likes Received:
    1
    Trophy Points:
    96
    Cdralw2k.sys file information
    If you have any of the above software, and want to use them, you have to keepe it. If not, I would get rid of it by running Roxio Zap.

    Don't worry bout asking too many questions. We just want to have you burning!

    http://www.file.net/process/cdralw2k.sys.html
     
  11. mingualez

    mingualez Member

    Joined:
    Jan 11, 2008
    Messages:
    26
    Likes Received:
    0
    Trophy Points:
    11
    I'll get shot of it! cheers.
     
  12. mingualez

    mingualez Member

    Joined:
    Jan 11, 2008
    Messages:
    26
    Likes Received:
    0
    Trophy Points:
    11
    Hi me again. started getting the odd probs again. However it appears to be hit and miss whether i get a burn or not, basically it works if it feels like it!. Do you think this may imply my cd drive is shot ???? But when it fails the symptoms are as previously mentioned. Starts to write , though it jimps to 7 maybe 13% gets up to 23 26 at best the fails!
    thanks in advance
     

Share This Page