1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Question Regaurding Entire Disk Burn using dvd shrink

Discussion in 'DVDR' started by edgure, Nov 13, 2004.

  1. edgure

    edgure Member

    Joined:
    Nov 13, 2004
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    I have recently downloaded DVD encryptor and DVD Shrink off this site, and they have been working quite well. However, I cannot figure out how to use these programs to burn an entire DVD, including all menus and extras. Is this possible, and if so, how does it effect quality, and how can i optimize quality. Thank you very much.

    ~Tommy Reece
     
  2. ScubaPete

    ScubaPete Senior member

    Joined:
    Mar 13, 2003
    Messages:
    6,324
    Likes Received:
    0
    Trophy Points:
    116


    Hey there Tommy, how are you doing ?

    Pretty much you don't have to do anything -

    Check it out -

    Use DVD Shrink with DVD Decrypter for a full disc backup at no cost to you.

    Here we go, step by step - it can't fail, "Uncle" ScubaPete's can't miss "We're going ta burn a DVD backup right now, youngin's'" Guide to backing up :p).

    To begin with, let's create a folder for your HD backup. . This is the place on your HD where DVD Shrink will work on your movie files and DVD Decrypter can pick them up to burn to disc. Try to put it someplace where you won't forget it (i.e. C:\ All My DVD Work\"Dumb and Dumber Meet the Parents Out for a Kill get Eaten Alive").

    To make sure we don't miss a step; PRINT THIS GUIDE OUT NOW !

    Next download DVD Decrypter and under "Mode" select "ISO, Write". Un-tick the box that says "Verify". Where it says, "Source", you'll leave that blank as DVD Decrypter will find the location of your backed up DVD file automatically. Lastly, where it says "Destination", select the drive where your burner resides. Feel free to close DVD Decrypter, DVD Shrink will open it when it needs it.

    Here's the link for the newest DVD Decrypter -
    http://www.dvddecrypter.com/

    Download DVD Shrink. Open it and click "Edit", then click "Preferences" on this page we're going to select "DVD Target Size" as "Custom" and set the size between "4300" and "4360MB" - we do this to make sure that we don't write too close to the edge of the disc. Then under the "File I/O" tab un-tick "Enable burning with Nero" then click "OK"

    Here’s the link for the newest DVD Shrink -
    http://www.dvdshrink.org/

    Now you can place your original DVD in your DVD-ROM drive and a DVD blank in your burner's drive (If you have two drives). If you only have the one drive, put your original in that drive now. When the time comes for you to put in your blank in either the drive door will open OR a message will appear. As for your DVD blank media, THIS IS IMPORTANT. Poor quality DVD blanks are responsible for a host of copying errors and hence, failures. Look for a thread dealing with backup media where we'll discuss DVD media in depth. But for now, PLEASE acquire some of the following recommended media for use with this ScubaPete "mini-guide". Quality media would be Sony, Phillips, TDK, Ritek G04, Verbatim "DataLife", Verbatim DataLife Plus, Ridata or any media boasting "Advanced Metal AZO", Taiyo Yuden's and generally, almost any discs manufactured by Mitsubishi are excellent bets. -This might be a good time to use a DVD RW. We won't use them regularly because for 1, many older DVD players don't play them and 2, they cost too much (Lol). We want to use them now because if we make a mistake, it won't cost us a disc. When we get our steps down we'll then switch to our single-write media.
    Now let's burn a DVD. Today we're doing a total backup, that's all the things on the original disc. There's no problem in doing this as long as we do not see any "Red" on the size bar at the top, right-hand area of DVD Shrink's program. (If you should see some "Red" there, on the size bar, simply "un-tick" any foreign languages, Director's comments or DTS sound boxes until the "Red" disappears.) With no "Red" visible on the size bar we just let the "Automatic" (Default) settings alone. THEN we select "Backup". Take just a second and under "Target Device" go to "Select backup target " once there, select "ISO Image File and burn with DVD Decrypter."
    Now, under "Quality Settings", if it's SPEED you're after, "un-tick" the box which says, "Perform deep analysis" and "un-tick" the box for "Compress the video with high quality adaptive error compensation". This will give you acceptable DVD backup. If it's QUALITY you're after and have some extra time to spend, "tick" Perform deep analysis before backup to improve quality" AND "tick" "Compress video with high quality adaptive error compensation." There you may adjust quality enhancements. Practicing with the settings can produce even better end products. For a no-frills DVD's like "There's something about Mary" I like Extra Smooth BUT for DVD's with a lot of special effects, I use the Extra Sharp setting. That's for me, you'll have to decide what you like :) If all the boxes are "grayed out" that's OK, it means your DVD is small enough that little will be lost from the original. Finally, where it says "Select target image file", browse till you find your created folder for your backup and click "Save". That's it ! Click "OK" and DVD Shrink begins the process that burns that ISO image to your HD. What that means is DVD Shrink then opens DVD Decrypter and has it burn the ISO image to your waiting blank DVD.
    Don't use your PC for anything at all while it's working.

    Remember, when you want a guide with warped personality, Shop ScubaPete

    And yes, you’re darn Skippy, you better come on back and let us know how you made out :p)

    Cheers,

    Pete
     
  3. edgure

    edgure Member

    Joined:
    Nov 13, 2004
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    Thanx so much for the in-depth reply Pete. This guide looks great. Now lets give this a try,

    ~Tommy Reece
     

Share This Page