1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Reading written data from a burn-failed DVD

Discussion in 'DVD±R media' started by anjanesh, May 20, 2007.

  1. anjanesh

    anjanesh Member

    Joined:
    May 20, 2007
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    11
    Hi

    Since a week back, I've been having a tough time with my DVD Writer (hp dvd635i) as it fails to burn after the progress-bar completes the 100% mark. Sometimes the result is a blank DVD and sometimes the data is written (by looking at the DVD).

    The error I get is a end of disk-at-once
    Code:
    ...
    7:53:23 PM	#31 Phase 38 File dlgbrnst.cpp, Line 1855
    	Burn process failed at 8x (11,080 KB/s)
    ...
    From the DVDs that have data written (but failed) but show 0 bytes in My Computer - is there any way to read that data using another tool ? Something like norton's tool that reads sector-wise ?

    Thanks
     
  2. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    11,493
    Likes Received:
    2
    Trophy Points:
    118
    Could you post the entire burn log as there may be more evidence as to why you are getting sporatic results?
     
  3. anjanesh

    anjanesh Member

    Joined:
    May 20, 2007
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    11

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/7/2004 5:33:44 PM
    Nero version: 6.3.1.26 (Nero Express)
    Recorder: <HP DVD Writer 635d> Version: JPS3 - HA 0 TA 0 - 6.3.1.26
    Adapter driver: <atapi> HA 0
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 1
    Drive is autodetected - recorder class: Std. MMC recorder
    CD-ROM: <HL-DT-ST CD-ROM GCR-8523B>Version: 1.02 - HA 0 TA 1 - 6.3.1.26
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    CdRomPeripheral : HP DVD Writer 635d atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8523B atapi Port 0 ID 1 DMA: On
    DiskPeripheral : SAMSUNG SP0411C atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    HP DVD Writer 635d D: CDRom0
    HL-DT-ST CD-ROM GCR-8523 E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 759MB (777660kB)
    Free physical memory: 193MB (197884kB)
    Memory in use : 74 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Enabled (1)

    20.5.2007
    Burn DVD Image
    7:49:37 PM #1 Text 0 File Reader.cpp, Line 126
    Reader running

    7:49:37 PM #2 Text 0 File Writer.cpp, Line 124
    Writer HP DVD Writer 635d running

    7:49:37 PM #3 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using DVD media

    7:49:38 PM #4 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 817013 (181:33.38, 1595MB)

    7:49:38 PM #5 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    7:49:38 PM #6 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: HP DVD Writer 635d, Media type: DVD-R
    Disc Manufacturer: MBI 01 - RG40
    Disc Application Code: 64, Disc Physical Code: 193

    7:49:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    7:49:38 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
    2 indices, index0 (150) not provided
    original disc pos #0 + 817014 (817014) = #817014/181:33.39
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 817014 blocks [HP DVD Writer 635d ]
    --------------------------------------------------------------

    7:49:38 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [HP DVD Writer 635d ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1673244672, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    817014 | lead-out | 1 | 0x00 | 0x41

    7:49:38 PM #10 Phase 24 File dlgbrnst.cpp, Line 1855
    Caching of files started

    7:49:38 PM #11 Text 0 File Burncd.cpp, Line 4163
    Cache writing successful.

    7:49:38 PM #12 Phase 25 File dlgbrnst.cpp, Line 1855
    Caching of files completed

    7:49:38 PM #13 Phase 36 File dlgbrnst.cpp, Line 1855
    Burn process started at 8x (11,080 KB/s)

    7:49:38 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    7:49:38 PM #15 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 2:42,456 (162456ms) -> OK

    7:49:38 PM #16 Text 0 File DVDR.cpp, Line 2011
    Recording mode: Sequential Recording Mode

    7:49:38 PM #17 Text 0 File Mmc.cpp, Line 20794
    Set BUFE: supported -> ON , Generic write control : ON

    7:49:38 PM #18 Text 0 File DVDR.cpp, Line 2152
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    7:49:38 PM #19 Text 0 File Cdrdrv.cpp, Line 8228
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    7:49:40 PM #20 Text 0 File Cdrdrv.cpp, Line 1297
    19:49:40.281 - HP DVD Writer 635d\H0 T0 : Queue again later

    7:52:59 PM #21 Text 0 File WriterStatus.cpp, Line 115
    <HP DVD Writer 635d > start writing Lead-Out at LBA 817014 (C7776h), lenght 0 blocks

    7:52:59 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    7:52:59 PM #23 Text 0 File DVDR.cpp, Line 2394
    EndDAO: Last written address was 817023

    7:53:19 PM #24 SCSI -1135 File Cdrdrv.cpp, Line 1191
    SCSI Exec, HA 0, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    7:53:23 PM #25 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    7:53:23 PM #26 CDR -1135 File ThreadedTransferInterface.cpp, Line 1708
    Write error
    HP DVD Writer 635d\H0 T0

    7:53:23 PM #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1708
    Could not perform end of Disc-at-once

    7:53:23 PM #28 Text 0 File DVDR.cpp, Line 2394
    EndDAO: Last written address was -1

    7:53:23 PM #29 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    7:53:23 PM #30 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    7:53:23 PM #31 Phase 38 File dlgbrnst.cpp, Line 1855
    Burn process failed at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/8/2001 9:37:32 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 2/8/2006 2:18:00 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 12:29:44 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


    Also, can anyone pl tell me what this means as I dont have anything related to Samsung !
    DiskPeripheral : SAMSUNG SP0411C atapi Port 1 ID 0 DMA: On
     
    Last edited: Oct 29, 2007
  4. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    11,493
    Likes Received:
    2
    Trophy Points:
    118
    Moser Bauer or what I suspect are TDK discs can be dodgy sometimes...not everyone has good luck with them, Verbatims seem to yeild a high success rate.


    Your HP DVD writer isn't showing current firmware and I'm having a time finding any firmware for the drive in it's original state...it appears to be a rebadged Lite-On which may or may not have a current firmware available for it.

    http://club.cdfreaks.com/showthread.php?t=167877

    This means that your drive doesn't know how to handle your discs...a firmware update may fix this error.


    That is your hard drive...






     
  5. anjanesh

    anjanesh Member

    Joined:
    May 20, 2007
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    11
    I did update the firmware before.

    It got updated from JPS3 to JPS5. (Screenshot was taken after update)
    [​IMG]
     
  6. IHoe

    IHoe Senior member

    Joined:
    May 21, 2005
    Messages:
    6,431
    Likes Received:
    0
    Trophy Points:
    116
    good that you updated your firmware....... did it do the trick? did you try again? how did you do?

    also noticed:
    you are using too much memory.... close down some programs that are running in the background, no internet, and no multi tasking while trying to burn! some members even shut down their antivirus software while burning!
     
  7. anjanesh

    anjanesh Member

    Joined:
    May 20, 2007
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    11
    Yes - same error after update. Sometimes data gets written to disk, sometimes it doesnt (blank disk even after 100% complete only after which it shows Failed).

    Cannot perform end of disk-at-once

    Btw, Nero was taking like 50% of the memory at the time of writing.
    Normally 300MB free memory is always left.
     
  8. IHoe

    IHoe Senior member

    Joined:
    May 21, 2005
    Messages:
    6,431
    Likes Received:
    0
    Trophy Points:
    116
    your version of Nero 6 is not the stablest version.... 6.6.0.18 is the most stablest version of Nero 6 and I would update it to that version. Here's how:

    Before udating to 6.6.0.18 I would save the serial #, uninstall Nero, then use the cleaning tools : http://ww2.nero.com/nero6/eng/Clean_Tools.html
    then do a registry clean up(free registry cleaner, CClean: http://www.ccleaner.com/download/downloadpage.aspx?1) and defrag...... then reboot!

    install package one:
    http://www.filehippo.com/download_nero_burning_rom/?539

    then install package two:
    http://www.nero.com/nero6/eng/Patch_for_NVE3.html
    reboot and you're good to go!
     
  9. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    11,493
    Likes Received:
    2
    Trophy Points:
    118
    Be sure to omit the InCD package when installing. Also, how old was that firmware when you reflashed the drive....I think this might just be a case of the media outgrowing support for the drive and might be time for a new one.
     
  10. IHoe

    IHoe Senior member

    Joined:
    May 21, 2005
    Messages:
    6,431
    Likes Received:
    0
    Trophy Points:
    116
    I looked up the firmware on the HP site and it's less than a year or so old! but just so you know.... not all firmware updates will solve MID codes! some might just solve a bug problem or update a write strategy for some MIDs and not the one you need! But it's always good to have the latest firmware update for your drive.
     
  11. anjanesh

    anjanesh Member

    Joined:
    May 20, 2007
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    11
    I just bought an external USB DVD Writer ( Sony DRX-S70U) and uninstalled Nero 6 OEM (which came with my HP DVD Writer) and installed Nero 7 OEM.

    I tried writing once again using my HP DVD Writer and still same old story. So its definitely not a s/w problem.

    The Sony DVD Writer works fine and have writter a couple of DVDs using the same DVDs that I bought earlier (so it cant be the DVDs), but since its USB based, I still wouldnt know if the firmware of the HP DVD Writer is the one with issues. Im now 99% sure that its a h/w issue.
     
  12. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    31,683
    Likes Received:
    1
    Trophy Points:
    96
    anjanesh - just passing thru and saw your logfile post was way too big on the eyes, so i took the liberty of removing the 'code' statements out of the post.

    One thing i noticed in the logfile is this -

    ..meaning that version of Nero didn't recognise the burner correctly so it thought you had some unknown generic burner.


    - see my first comment, i'm assuming Nero 7 only sees the HP burner as a generic burner also.

    as i say, you'll find it's a Nero issue...

    ..post the latest logfile (from a burn using the HP burner) and see what the good folks can make of it...
     
  13. anjanesh

    anjanesh Member

    Joined:
    May 20, 2007
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    11
    Odd ... all this time (1.5 yrs) this is issue didnt arise. The Nero I was using to burn with the HP DVD Writer was the one that came with the Writer - Nero 6 OEM version. But I did burn a LOT of DVDs for my friends etc.

    I uninstalled Nero 6 OEM and installed Nero 7 OEM only because of the Sony Writer I just got.

    Log file when I burnt using Nero 7 via HP DVD Writer:


    XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-**** (*)

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=169792 bytes, created 3/14/2007 12:02:04 PM

    NT-SPTI used
    Nero Version: 7.5.14.2
    Internal Version: 7, 5, 14, 2
    (Nero Express)
    Recorder: <HP DVD Writer 635d> Version: JPS5 - HA 1 TA 0 - 7.5.14.2
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
    Connected to MMC as unknown drive with class-nr : 1
    Drive is autodetected - recorder class: Std. MMC recorder
    CD-ROM: <HL-DT-ST CD-ROM GCR-8523B>Version: 1.02 - HA 1 TA 1 - 7.5.14.2
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    CdRomPeripheral : HP DVD Writer 635d atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8523B atapi Port 0 ID 1 DMA: On
    DiskPeripheral : SAMSUNG SP0411C atapi Port 1 ID 0 DMA: On
    DiskPeripheral : ST3250824AS atapi Port 2 ID 0 DMA: On

    === CDRom-Device-Map ===
    HP DVD Writer 635d D: CDRom0
    HL-DT-ST CD-ROM GCR-8523B E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 1783MB (1826236kB)
    Free physical memory: 1244MB (1273944kB)
    Memory in use : 30 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.10.2007
    ISO compilation
    9:16:35 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    9:16:35 PM #2 Text 0 File Isodoc.cpp, Line 6517
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    9:16:36 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3341
    First writeable address = 0 (0x00000000)

    9:16:36 PM #4 Text 0 File Burncd.cpp, Line 3490
    Turn on Disc-At-Once, using DVD media

    9:16:36 PM #5 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2099199 (466:29.24, 4099MB)

    9:16:36 PM #6 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)

    9:16:36 PM #7 Text 0 File DlgWaitCD.cpp, Line 2940
    Recorder: HP DVD Writer 635d, Media type: DVD-R
    Disc Manufacturer: MBI 01 - RG40
    Disc Application Code: 64, Disc Physical Code: 193

    9:16:36 PM #8 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:16:36 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 792
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2099200 (2099200) = #2099200/466:29.25
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2099200 blocks [D: HP DVD Writer 635d]
    --------------------------------------------------------------

    9:16:36 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [D: HP DVD Writer 635d] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4299161600, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 2099200 | 0 | 0x00
    2099200 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    9:16:36 PM #11 Text 0 File SCSIPTICommands.cpp, Line 209
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    9:16:36 PM #12 Text 0 File Burncd.cpp, Line 4263
    Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

    9:16:36 PM #13 Phase 24 File dlgbrnst.cpp, Line 1760
    Caching of files started

    9:16:36 PM #14 Text 0 File Burncd.cpp, Line 4382
    Cache writing successful.

    9:16:36 PM #15 Phase 25 File dlgbrnst.cpp, Line 1760
    Caching of files completed

    9:16:36 PM #16 Phase 36 File dlgbrnst.cpp, Line 1760
    Burn process started at 6x (8,310 KB/s)

    9:16:36 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2712
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    9:16:36 PM #18 Text 0 File DVDR.cpp, Line 3146
    Recording mode: Sequential Recording Mode

    9:16:36 PM #19 Text 0 File DVDR.cpp, Line 3302
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:16:36 PM #20 Text 0 File Cdrdrv.cpp, Line 9826
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Revision number of maximum recording speed: 6.0
    Revision number of minimum recording speed: -
    Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
    Class: 0
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    9:16:36 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 83836800

    9:17:55 PM #22 Text 0 File Cdrdrv.cpp, Line 1333
    21:17:55.453 - D: HP DVD Writer 635d : Queue again later

    9:21:55 PM #23 SPTI -1135 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 0C 3E 40 00 00 20 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
    Buffer x0a37c640: Len x10000
    0x00 AB 23 F7 AD 68 F9 6A AB 53 9B 48 27 F8 7C CE
    0xCE A6 C7 A7 12 5A 4F B7 B3 5D 2D 80 A0 A8 73 38
    0x22 43 4E 3C 56 00 D2 4D 40 49 97 76 D2 20 EE 36

    9:21:55 PM #24 CDR -1135 File Writer.cpp, Line 299
    Write error
    D: HP DVD Writer 635d

    9:21:55 PM #25 Text 0 File DVDR.cpp, Line 3704
    EndDAO: Last written address was 802367 (C3E3Fh)

    9:21:55 PM #26 Phase 38 File dlgbrnst.cpp, Line 1760
    Burn process failed at 6x (8,310 KB/s)

    9:21:55 PM #27 Text 0 File SCSIPTICommands.cpp, Line 254
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    9:21:57 PM #28 Text 0 File Cdrdrv.cpp, Line 11061
    DriveLocker: UnLockVolume completed

    9:21:57 PM #29 Text 0 File SCSIPTICommands.cpp, Line 411
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 9:37:32 PM
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 4/23/2007 5:45:25 AM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 8/16/2007 4:03:10 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


    Side Note: Before starting this thread, I had IMAPI CD-Burning COM Service (C:\WINDOWS\system32\imapi.exe) disabled after I came across same issues.
     
    Last edited: Oct 29, 2007
  14. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    31,683
    Likes Received:
    1
    Trophy Points:
    96
    i'm just saying that Nero has been using the burner as a generic burner, sure it'll work most of the time, just thought i'd mention it as it's best to get everything setup correctly due to Nero's somewhat picky nature.
    i'm guessing the HP burner just doesn't find those discs palatable.

    i removed the 'code' statements again, 'fraid this laptop i'm using at the moment only supports 1024x768 maximum so the code statements make the logfile look like a huge billboard :)
     
  15. anjanesh

    anjanesh Member

    Joined:
    May 20, 2007
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    11
    Any setting worth mentioning ? I dont if it a memory issue, but prior to all this, my 256MB memory module (have an additional 512MB module and 1GB module) was giving some issues (BSOD).

    So far its same HP DVDs. Nothings changed.
     
  16. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    31,683
    Likes Received:
    1
    Trophy Points:
    96
    I think the other guys have been over all the settings; trouble is with discs such as HP and TDK (and other such 'brands' too) is that they use various different manufacturer's discs, and even 2 identical looking packages from 'brands' such as these can have 2 completely different manufacturer's discs within; personally i would use those remaining HP discs on the Sony burner only and try something better on the HP burner.

    /hints to look at media listed in my signature :)
     
  17. anjanesh

    anjanesh Member

    Joined:
    May 20, 2007
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    11
    Nero SmartStart > Extras > Get System Info

    [​IMG]

    Does this mean that Nero is detecting it as a generic burner ?
     

Share This Page