1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Recover Blu Ray Playback - Phat 256mb NAND Consoles

Discussion in 'PS3 - Modding & Hacking' started by coorva, Sep 28, 2011.

  1. coorva

    coorva Regular member

    Joined:
    Apr 17, 2005
    Messages:
    1,239
    Likes Received:
    0
    Trophy Points:
    46
    Ok, so finally....
    How To Recover BD Playback On 256meg Fats

    You will need to QA flag your PS3
    IF you are on 3.55: Using the special 3.55 downgrade PUP by Jaicrab, then down again to 3.15 or 3.41 using stock PUP files

    Follow this guide to QA flag your PS3


    Originally Posted by ps3nemesis
    NOTE BEFORE YOU ATTEMPT THIS OR ANY MOD TO PS3 FILE STRUCTURE PLEASE BACK-UP YOR dev_flash 2 FOLDER AND THE WHOLE OF dev_hdd0/home AS THIS IS WHERE YOUR PSN / DLC/ PSONE LICENCES ARE KEPT. ALSO MAKE AN EXTRA BACK-UP OF dev_hdd0/home/act.dat .

    PLEASE ALSO BE AWARE THAT SOME PEOPLE ARE STATING THAT THE TROPHY SYSTEM GETS MESSED UP !!!!!!!! FOOLS RUSH IN .........

    Note: Only works on Otheros++ 3.55 or 3.41 CFW at the moment, so you'll have to reflash to it, then go back to your cfw's
    (i.e 3.55 CFW > Otheros++ > QA Flag > 3.55 CFW )



    |Requirements| instalation instructions|

    PS3 on OtherOS++ 3.55 CFW PUP

    rename it to PS3UPDAT.PUP

    install the firmware

    QA Auto Flag .PKG

    install the qa_flag.pkg

    then run the qa_flag program

    if you hear a beep, it worked.

    restart ps3
    Go to network settings (Do not enter it) and hit or hold L1+L2+L3+R1+R2+down on the dpad

    QA auto flagging is now done

    Turn on the 'system update debug' in the debug settings
    Play a BD disc with the highest MKB version you can get..Latest release from Blockbuster or whatever.

    Note: It may start to play and then you get no video output to the tv.This happened a few times to me. Just power off, accept the "naughty boy" messgage from Sony and try again until it plays. If it keeps doing this, you need to change to AV or component leads since your TV seems to not be 100% HDMI/BD compliant.

    I have tested this on several (at least 5) PS3's with 100% success rate.

    Thanks to Mark Webber for the news!
     

Share This Page