1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Reset Error etc Please Help.

Discussion in 'Nero discussion' started by Dslord017, Jun 21, 2007.

  1. Dslord017

    Dslord017 Member

    Joined:
    Jun 21, 2007
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    I have a LG dual Layer Burner (GSA-H50L)and using RiData DVD-R DL 4X DVD's.

    I can burn movie copies on single layers no problem but when I try Dual layer burns when it get's to the second layer it always fails. Sometimes not right away but it does eventually.

    I am successful with similuations but fail when it comes to the real burn.

    I have used the nero clean up tool and re-installed with the lastest version.

    The last 2 errors I have received have been reset errors. Previously I have had a no seek error, and I think someting like track following error as well.

    I have exchanged the burner and still the same results.

    The log error is as follows
    Windows XP 5.1
    IA32
    WinAspi: -

    NT-SPTI used
    Nero Version: 7.9.6.0
    Internal Version: 7, 9, 6, 0

    Recorder: <HL-DT-ST DVD-RAM GSA-H50L>Version: 1.00 - HA 1 TA 0 - 7.9.6.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-RAM GSA-H50L>Version: 1.00 - HA 1 TA 0 - 7.9.6.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800JB-00ETA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : WDC WD400BB-53AUA1 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H50L atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-RAM GSA-H50L F: CdRom0
    HL-DT-ST DVDRAM GSA-4163B H: CdRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 767MB (785904kB)
    Free physical memory: 319MB (326984kB)
    Memory in use : 58 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    21.6.2007
    Burn DVD Image
    11:09:02 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    11:09:02 PM #2 Text 0 File Burncd.cpp, Line 3508
    Turn on Disc-At-Once, using DVD media

    11:09:02 PM #3 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 4172815 (927:17.40, 8150MB)
    Last address to be written: 3505100 (778:54.50, 6845MB)

    11:09:02 PM #4 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)

    11:09:02 PM #5 Text 0 File DlgWaitCD.cpp, Line 2964
    Recorder: HL-DT-ST DVD-RAM GSA-H50L, Media type: DVD-R Dual Layer
    Disc Manufacturer: RITEKP - 01
    Disc Application Code: 2, Disc Physical Code: 145

    11:09:02 PM #6 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    11:09:02 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 793
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 3505101 (3505101) = #3505101/778:54.51
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3505101 blocks [F: HL-DT-ST DVD-RAM GSA-H50L]
    --------------------------------------------------------------

    11:09:02 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [F: HL-DT-ST DVD-RAM GSA-H50L] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7178446848, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 3505101 | 3505101 | 0x00
    3505101 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    11:09:03 PM #9 Text 0 File SCSIPTICommands.cpp, Line 215
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    11:09:03 PM #10 Text 0 File Burncd.cpp, Line 4294
    Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

    11:09:03 PM #11 Phase 24 File dlgbrnst.cpp, Line 1762
    Caching of files started

    11:09:03 PM #12 Text 0 File Burncd.cpp, Line 4413
    Cache writing successful.

    11:09:03 PM #13 Phase 25 File dlgbrnst.cpp, Line 1762
    Caching of files completed

    11:09:03 PM #14 Phase 32 File dlgbrnst.cpp, Line 1762
    Simulation started at 4x (5,540 KB/s)

    11:09:03 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    11:09:03 PM #16 Text 0 File DVDPlusDualLayer.cpp, Line 494
    Disc finalized, LBA total Image size: 3505101 (6845MB), Last LBA L0: 1752559 (3422MB)

    11:09:03 PM #17 Text 0 File DVDPlusDualLayer.cpp, Line 670
    L0 Data Zone Capacity not set.
    Max LBA L0 2092895 (1FEF5Fh, 4087MB), next writable address 0 (0h, 0MB)

    11:09:03 PM #18 CDR -1205 File DVDPlusDualLayer.cpp, Line 686
    Burning Layer 1

    11:09:03 PM #19 Text 0 File DVDPlusDualLayer.cpp, Line 696
    Start writing layer 1 at address 0 (0h)
    Recording mode: unknown Recording Mode

    11:09:03 PM #20 Text 0 File DVDR.cpp, Line 3225
    Recording mode: Sequential Recording Mode

    11:09:03 PM #21 Text 0 File DVDR.cpp, Line 3381
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    11:09:03 PM #22 Text 0 File Cdrdrv.cpp, Line 9872
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: - (6), Extended Part Version: 3.0 (48)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
    Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 22EF5F h (LBN: 1FEF5F h, 4087 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Revision number of maximum recording speed: 1.0
    Revision number of minimum recording speed: -
    Revision number table of recording speed: - - - - - - -
    Class: 0
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 10 00 00 00 00 00 00 - 00 00 00 30 00 00 00 00 ...........0....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:09:03 PM #23 Text 0 File DVDR.cpp, Line 3517
    Reserved Track size: 3505104 (357BD0h, 6845MB) -> return code 0

    11:09:03 PM #24 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 83836800

    11:22:10 PM #25 CDR -1206 File DVDPlusDualLayer.cpp, Line 1969
    Burning Layer 2

    11:22:10 PM #26 Text 0 File DVDPlusDualLayer.cpp, Line 1980
    Perform layer 1 to 2 jump before writing at address 2092896 (1FEF60h)

    11:31:04 PM #27 Text 0 File WriterStatus.cpp, Line 113
    <F: HL-DT-ST DVD-RAM GSA-H50L> start writing Lead-Out at LBA 3505101 (357BCDh), length 0 blocks

    11:31:04 PM #28 Phase 181 File dlgbrnst.cpp, Line 1762
    Writing lead-out...

    11:36:14 PM #29 Text 0 File DVDR.cpp, Line 3783
    EndDAO: Last written address was 3505100 (357BCCh)Estimated time for completing DVD-R DL disc: 5min 01sec

    11:36:15 PM #30 Phase 33 File dlgbrnst.cpp, Line 1762
    Simulation completed successfully at 4x (5,540 KB/s)

    11:36:16 PM #31 Phase 36 File dlgbrnst.cpp, Line 1762
    Burn process started at 4x (5,540 KB/s)

    11:36:16 PM #32 Text 0 File ThreadedTransferInterface.cpp, Line 2721
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    11:36:16 PM #33 Text 0 File DVDPlusDualLayer.cpp, Line 494
    Disc finalized, LBA total Image size: 3505101 (6845MB), Last LBA L0: 1752559 (3422MB)

    11:36:16 PM #34 Text 0 File DVDPlusDualLayer.cpp, Line 670
    L0 Data Zone Capacity not set.
    Max LBA L0 2092895 (1FEF5Fh, 4087MB), next writable address 0 (0h, 0MB)

    11:36:16 PM #35 CDR -1205 File DVDPlusDualLayer.cpp, Line 686
    Burning Layer 1

    11:36:16 PM #36 Text 0 File DVDPlusDualLayer.cpp, Line 696
    Start writing layer 1 at address 0 (0h)
    Recording mode: unknown Recording Mode

    11:36:16 PM #37 Text 0 File DVDR.cpp, Line 3225
    Recording mode: Sequential Recording Mode

    11:36:16 PM #38 Text 0 File DVDR.cpp, Line 3381
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    11:36:16 PM #39 Text 0 File Cdrdrv.cpp, Line 9872
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: - (6), Extended Part Version: 3.0 (48)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
    Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 22EF5F h (LBN: 1FEF5F h, 4087 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Revision number of maximum recording speed: 1.0
    Revision number of minimum recording speed: -
    Revision number table of recording speed: - - - - - - -
    Class: 0
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 10 00 00 00 00 00 00 - 00 00 00 30 00 00 00 00 ...........0....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:36:16 PM #40 Text 0 File DVDR.cpp, Line 3517
    Reserved Track size: 3505104 (357BD0h, 6845MB) -> return code 0

    11:36:16 PM #41 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 83836800

    11:59:41 PM #42 SPTI -1114 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
    Sense Key: 0x06 (KEY_UNIT_ATTENTION)
    Sense Code: 0x29
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 1F EF 40 00 00 20 00 00 00
    Sense Area: 0x70 00 06 00 00 00 00 0E 00 00 00 00 29
    Buffer x08023840: Len x10000
    0x00 00 01 BA 44 1C 87 34 0C 97 01 89 C3 F8 00 00
    0x01 E0 07 EC 81 00 00 9A 70 D0 B2 82 5B DD F5 F7
    0xC0 03 F3 72 D2 6D B4 84 50 47 A5 6F 3C 44 FB ED

    11:59:41 PM #43 CDR -1114 File Writer.cpp, Line 303
    Reset occurred
    F: HL-DT-ST DVD-RAM GSA-H50L

    11:59:41 PM #44 Phase 181 File dlgbrnst.cpp, Line 1762
    Writing lead-out...

    12:02:36 AM #45 Text 0 File DVDR.cpp, Line 3783
    EndDAO: Last written address was 2092863 (1FEF3Fh)Estimated time for completing DVD-R DL disc: 13min 30sec

    12:02:36 AM #46 Phase 38 File dlgbrnst.cpp, Line 1762
    Burn process failed at 4x (5,540 KB/s)

    12:02:37 AM #47 Text 0 File SCSIPTICommands.cpp, Line 261
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    12:02:44 AM #48 Text 0 File Cdrdrv.cpp, Line 11185
    DriveLocker: UnLockVolume completed

    12:02:44 AM #49 Text 0 File SCSIPTICommands.cpp, Line 424
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    Any help would be appreciated.

    Thanks
     
  2. laddyboy

    laddyboy Regular member

    Joined:
    Jan 4, 2005
    Messages:
    4,188
    Likes Received:
    0
    Trophy Points:
    46
    There's a newer firmware for your burner, version 1.01, here:

    http://us.lgservice.com/index_b2c.jsp

    That may or may not solve your problem.


    You could also try creating an ISO image of your project and burning with ImgBurn:

    http://www.imgburn.com


    Ridata media isn't the best and is harder to burn than Verbatim for many burners.
     

Share This Page