1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Roxio burn failures Please help

Discussion in 'DVDR' started by michael36, Feb 3, 2005.

  1. michael36

    michael36 Member

    Joined:
    Feb 1, 2005
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    11
    This is my second cry from the wilderness. I've been decrypting with DVD Dycrpter and then trying to burn with Shrink DVD and Roxio. Everything seems to go fine until Shrink gets to the burn phase and I get the error message below from a window headed:

    Burn Process Failed at 2.4x (3,324 KB/s)

    I'm trying to burn onto Memorex DVD +R 8x Could the media be the problem.

    My burner is an older NEC 1100 A which (I believe) can nly burn at 2.4 or 4 x. Could this be the problem. Anyone know if there's a firmware option that might address this (if this is the problem)?

    If someone could point me at the right resource or tell me where i'm going wrong I'd really appreciate it.

    TIA Michael

    Error message follows:




    Windows 2000 5.0
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 10:18:06 PM
    Nero API version: 6.3.0.3
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <_NEC DVD+RW ND-1100A> Version: 10GE - HA 1 TA 1 - 6.3.0.3
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8163 D: CDRom0
    _NEC DVD+RW ND-1100A E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 255MB (261128kB)
    Free physical memory: 68MB (69740kB)
    Memory in use : 73 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    3.2.2005
    NeroAPI
    4:15:12 PM #1 Phase 112 File APIProgress.cpp, Line 253
    DVD-Video files reallocation started

    4:15:12 PM #2 Phase 114 File APIProgress.cpp, Line 253
    DVD-Video files reallocation completed (no file modified)

    4:15:12 PM #3 Phase 111 File APIProgress.cpp, Line 253
    DVD-Video files sorted

    4:15:12 PM #4 SCSI -1065 File Cdrdrv.cpp, Line 1171
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03475000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x20
    Sense Qual: 0x00
    CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x20 0x00

    4:15:13 PM #5 Text 0 File Reader.cpp, Line 118
    Reader running

    4:15:13 PM #6 Text 0 File Writer.cpp, Line 124
    Writer _NEC DVD+RW ND-1100A running

    4:15:13 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3882
    First writeable address = 0 (0x00000000)

    4:15:13 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3882
    First writeable address = 0 (0x00000000)

    4:15:13 PM #9 Text 0 File Burncd.cpp, Line 3101
    Turn on Disc-At-Once, using DVD media

    4:15:13 PM #10 Text 0 File DlgWaitCD.cpp, Line 240
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2286111 (508:01.36, 4465MB)

    4:15:13 PM #11 Text 0 File DlgWaitCD.cpp, Line 245
    Write in overburning mode: FALSE

    4:15:13 PM #12 Text 0 File DlgWaitCD.cpp, Line 2085
    Recorder: _NEC DVD+RW ND-1100A, Media type: DVD+R

    4:15:13 PM #13 Text 0 File DlgWaitCD.cpp, Line 406
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    4:15:13 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 779
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [_NEC DVD+RW ND-1100A ]
    --------------------------------------------------------------

    4:15:13 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 948
    Prepare recorder [_NEC DVD+RW ND-1100A ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2286112 | lead-out | 1 | 0x00 | 0x41

    4:15:13 PM #16 Phase 24 File APIProgress.cpp, Line 253
    Caching of files started

    4:15:13 PM #17 Text 0 File Burncd.cpp, Line 4073
    Cache writing successful.

    4:15:13 PM #18 Phase 25 File APIProgress.cpp, Line 253
    Caching of files completed

    4:15:13 PM #19 Phase 36 File APIProgress.cpp, Line 253
    Burn process started at 2.4x (3,324 KB/s)

    4:15:13 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2264
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    4:15:13 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1171
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03475000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    4:15:13 PM #22 SCSI -1065 File Cdrdrv.cpp, Line 1171
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03476000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x20
    Sense Qual: 0x00
    CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x20 0x00

    4:15:13 PM #23 SCSI -1065 File Cdrdrv.cpp, Line 1171
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03476000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x20
    Sense Qual: 0x00
    CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x20 0x00

    4:15:13 PM #24 SCSI -1065 File Cdrdrv.cpp, Line 1171
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x20
    Sense Qual: 0x00
    CDB Data: 0xF9 0x14 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x20 0x00

    4:15:13 PM #25 Text 0 File DVDR.cpp, Line 4034
    Drive: _NEC DVD+RW ND-1100A
    Book Type request: DVD-ROM
    Changing the book type was finish with error code: -1065

    4:15:13 PM #26 Text 0 File DVDPlusRW.cpp, Line 564
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    4:15:37 PM #27 SCSI -1106 File Cdrdrv.cpp, Line 1431
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x082C0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x03
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x73 0x03

    4:15:37 PM #28 CDR -1106 File Writer.cpp, Line 301
    Power calibration error

    4:15:38 PM #29 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    4:15:38 PM #30 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    4:15:38 PM #31 Phase 127 File APIProgress.cpp, Line 253
    Generating DVD high compatibility borders

    4:15:38 PM #32 Phase 129 File APIProgress.cpp, Line 253
    Generating DVD borders completed successfully

    4:15:38 PM #33 SCSI -1065 File Cdrdrv.cpp, Line 1171
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03475000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x20
    Sense Qual: 0x00
    CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x20 0x00

    4:15:38 PM #34 SCSI -1065 File Cdrdrv.cpp, Line 1171
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x20
    Sense Qual: 0x00
    CDB Data: 0xF9 0x14 0xA1 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x20 0x00

    4:15:38 PM #35 Text 0 File DVDR.cpp, Line 4034
    Drive: _NEC DVD+RW ND-1100A
    Book Type request: none
    Changing the book type was finish with error code: -1065

    4:15:38 PM #36 Phase 38 File APIProgress.cpp, Line 253
    Burn process failed at 2.4x (3,324 KB/s)


    Existing drivers:
    File 'Drivers\CDUDF.SYS': Ver=5.3.5.10, size=363927 bytes, created 10/19/2003 11:39:48 AM
    File 'Drivers\CDR4_2K.SYS': Ver=5.3.5.10, size=58128 bytes, created 10/19/2003 11:39:48 AM
    File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 10/19/2003 11:39:48 AM

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    Last edited: Feb 4, 2005
  2. pulsar

    pulsar Active member

    Joined:
    Dec 31, 2003
    Messages:
    2,420
    Likes Received:
    1
    Trophy Points:
    68
    If you have a look around this forum you will find that most avoid memorex at all costs, as they do with roxio. Most here burn with nero in conjunction with shrink. You will have to uninstall roxio completely. Have a look in the media section of this forum to find what others use. I use Imation, datawrite, packard bell. Verbatim & Ritek get a good rep.
    You have to experiment with media. Also burn to a max of 4X. If you try to burn faster you run the risk of write errors.
    Here is a link for the Roxio Zapper. This is VITAL in order that you remove ALL files & registry changes. Everyone uses this Zapper.

    http://media.fastclick.net/w/get.me...www.microadvantage.net/downloads/zapper60.zip

    Hope this was of some help. PS, welcome to our club. You will no doubt learn & contribute to our wealth of information!

    Kind Regards,
    Pulsar
     
  3. bardie

    bardie Regular member

    Joined:
    Dec 2, 2004
    Messages:
    584
    Likes Received:
    0
    Trophy Points:
    26
    Two things I would do if it were me.
    Get better quality media such as TDK, Maxell, TY, Sony, Verbatim and the list goes on.
    I would also get rid of Roxio and replace it with Nero.

     
  4. bardie

    bardie Regular member

    Joined:
    Dec 2, 2004
    Messages:
    584
    Likes Received:
    0
    Trophy Points:
    26
    Pulsar......beat me by a minute......lol
     
  5. pulsar

    pulsar Active member

    Joined:
    Dec 31, 2003
    Messages:
    2,420
    Likes Received:
    1
    Trophy Points:
    68
    You should remove your Nero key from the top of your thread.

    It begins with 1A23......

    By the way, shink does not burn, only compresses!! Roxio or decrypter burns!

    Also have you de-fragged lately? or disc clean up? Do you turn off your anti-virus? Are you multi-tasking your PC whilst burning?
    I also noticed in you log that there was a "Power calibration error". this is an indication of bad media, or that your burner is on its' last legs!!!
     
  6. pulsar

    pulsar Active member

    Joined:
    Dec 31, 2003
    Messages:
    2,420
    Likes Received:
    1
    Trophy Points:
    68
    Bardie, sorry about that!!! LOL
     
  7. bardie

    bardie Regular member

    Joined:
    Dec 2, 2004
    Messages:
    584
    Likes Received:
    0
    Trophy Points:
    26
    LOL....that's fine
     
  8. michael36

    michael36 Member

    Joined:
    Feb 1, 2005
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    11
    Thanks for the warm welcome and quick response. I have indeed learned a lot from this "club" already and look forward to much much more.

    I was in fact burning with Nero. The reference to Roxio in the original post was my error. I do have Roxio on my machine and will remove it. I also just updated my Nero version so with luck this will help.

    Equally I'll shut down my anti-virus and not multi task next time I burn (attempt to burn).

    As far as media goes, I've noticed here the comment that brand names don't count for much as the labels contract out the manufacture to other companies. Do I take it then that Memorex consistently buys from poor quality suppliers?

    Thanks again.

    Michael
     
  9. bardie

    bardie Regular member

    Joined:
    Dec 2, 2004
    Messages:
    584
    Likes Received:
    0
    Trophy Points:
    26
    The original Memorex was good, but they changed manufacturer's and they have gone down hill ever since.
    Most users here steer clear of them and tend to use the better quality discs, which from time to time will throw a bad one, but nothing like Memorex.
     
    Last edited: Feb 3, 2005
  10. michael36

    michael36 Member

    Joined:
    Feb 1, 2005
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    11

    Well I took action and tried deleting my Roxio with the zapper tool.

    The tool wouldn't work because it said the burn engine was in use.

    So I removed Roxio the old fashioned Add/Remove way.

    Tried using the zapper then to search for any reg. vestigal reminants etc. Didn't run.

    So I removed Nero as well.

    Now I can't access either of my dvd drives.

    Device manager says they are there and working properly. Which is good 'cause I can see 'em :)

    The Add/Remove hardware Wizard tells me that:

    This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

    So obviously I've deleted the wrong something. Any idea what that might be and how I'd reinstall it without the aid of my cd/dvd drives. I do have a floppy and Norton "unerase".

    Again. TIA

     
  11. michael36

    michael36 Member

    Joined:
    Feb 1, 2005
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    11
    Thinking that the problem might have to do with the ASPI layer which appears to have disappeared I downloaded 4.6 and installed it per the instructions on Dell support. but I'm getting no joy with my dvd drives.????

    The clean tools recommended in other places on this site don't seem to have worked for me.

    Any ideas or suggestions are welcome.

    Again TIA Michael
     
  12. bazilla

    bazilla Regular member

    Joined:
    Jan 13, 2005
    Messages:
    412
    Likes Received:
    0
    Trophy Points:
    26
    I would reinstall Nero.

    Nero has a tool that will check out your ASPI for you. In the Nero folder's, it's in the "Toolkit" folder, and is entitled "Nero Info Tool". It has an "ASPI" tab. When you click on it, there is a pull-down menu, with one option for "System ASPI" and the other for "Nero ASPI."

    In your original post, you said you were trying to burn with Roxio. It doesn't look like it, because you posted a Nero error log. Shrink uses Nero to burn (unless you opt for decrypter). As for Roxio, the usual prejudice you get from people around here should apply only to Easy CD [bold]Creator[/bold]. Roxio has a different product, Roxio Easy DVD [bold]Copy[/bold] which is pretty good.

    As for the Memorex media, the blanket condemnation is also inappropriate. It depends on the manufacturer. I'm using Memorex's with a PRODISC id, and they are better than the Maxell's with a RITEK id, at least for me.
     
  13. restart

    restart Member

    Joined:
    Jan 16, 2005
    Messages:
    31
    Likes Received:
    0
    Trophy Points:
    16
    I've been using Roxio Basic for over a year and haven't had any problems. I don't use shrink to burn my disk. I burn the disk from the hdd using disk creator. I move the Video_ts folder and copy it just like any other normal files. I've had no problems. Any errors are due to bad burns by the DVD burner or bad media which I've had. I just replaced my dvd burner because it was creating too many coasters. Now my bad burns are gone.
     
  14. Rotary

    Rotary Senior member

    Joined:
    Apr 10, 2003
    Messages:
    8,353
    Likes Received:
    0
    Trophy Points:
    116
    hi guys...

    i skipped most so please forgive, but its getting a long thread.....

    ok you only need 2 free amamzing apps!

    rip with dvd decrypter in iso mode and load the iso to dvd shrink to compress / re-author, and set shrink to use either dvd decrypter engine or nero engine to burn!

    done easy...

    =============

    edit!
    FIRMWARE either hacked or original!

    http://forum.rpc1.org/dl_firmware.php?category=4&manufactor=23

    new firmware can correct alot of probs! like new 8x media not writing properly etc etc etc....
     
    Last edited: Feb 4, 2005
  15. michael36

    michael36 Member

    Joined:
    Feb 1, 2005
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    11
    Thanks for this morning's posts.

    I've reinstalled Nero 6.6 and using Nero's tools I see both the 4.6 ASPI and the Nero ASPI installed and working.

    Unfortunately my system is still unable to detect my cd/dvd devices.

    Any suggestions as to what I may need to reistall to make things work again would be most appreciated.

    Yes, bazilla, I was in error when I referenced Roxio in my initial post. I was in fact using Nero. something not picked up on by the mod? who changed the thread header :)

    Again TIA one and all.
     
  16. Rotary

    Rotary Senior member

    Joined:
    Apr 10, 2003
    Messages:
    8,353
    Likes Received:
    0
    Trophy Points:
    116
    hi

    go to device manager and unibstall the drives! then reboot...

    if that doesnt work

    go to devive manager and uninstall IDE/ATAPI controller and reboot? its the header of the section...
     
  17. michael36

    michael36 Member

    Joined:
    Feb 1, 2005
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    11
    Well thanks for the uninstall suggestions. Tried 'em both but I'm still not able to access the devices. The device manager is giving me a message that says:

    Windows cannot load the drivers required for this device. (Code 31)

    Help :) Thanks Michael
     
  18. Rotary

    Rotary Senior member

    Joined:
    Apr 10, 2003
    Messages:
    8,353
    Likes Received:
    0
    Trophy Points:
    116
    hi

    go to the manufactures website of your motherboard!

    and download the latest VIA4in1 drivers and install!

    let us know ;-])
     
  19. bazilla

    bazilla Regular member

    Joined:
    Jan 13, 2005
    Messages:
    412
    Likes Received:
    0
    Trophy Points:
    26
    Last edited: Feb 4, 2005
  20. Rotary

    Rotary Senior member

    Joined:
    Apr 10, 2003
    Messages:
    8,353
    Likes Received:
    0
    Trophy Points:
    116
    EXCELLANT BAZILLA!!!!!

     

Share This Page