Hi there New to the forum, so firstly hello! Could you help me with a small problem that I have been getting. I wanted to make backups of some MP3 files, so I went out and purchased a Philips DVDR1660P1 (Firmware 1.6, latest) DVD writer drive and I am also running Nero 6.6.1.4 (as part of the Nero 6 Suite) - I'm using Logik Dvd+R discs as well as Sony Dvd-R discs. Firstly I should say the drive seems to be able to read normal DVD's without any problem, and is very responsive. However when I put in one of the blank DVD's for writing, Nero reports "No Disc Inserted or drive not ready, please try again", and also it reports no disc present in My Computer. Now the really weird thing is, every now and again when I put in it does work (less than 10% of the time), but when I try to record a disc even at low write speeds like 2x and 4x, it gives me a "session fixation error" - although I have managed one sucess out of probably two dozen attempts. I have enclosed the Nero log in case it helps. I would appreciate any suggestions on how to solve the problem as its driving me around the bend at the moment! :doh: All the best. Code: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 NT-SPTI used Nero Version: 6.6.1.4 Internal Version: 6, 6, 1, 4d Recorder: <PHILIPS DVDR1660P1> Version: P1.6 - HA 1 TA 0 - 6.6.1.4 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <PHILIPS DVDR1660P1 >Version: P1.6 - HA 1 TA 0 - 6.6.1.4 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD600AB-77BVA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3802110A atapi Port 0 ID 1 DMA: On CdRomPeripheral : PHILIPS DVDR1660P1 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === PHILIPS DVDR1660P1 D: CDRom0 HL-DT-ST CD-RW GCE-8160B E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (83886080) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1047992kB) Free physical memory: 189MB (194432kB) Memory in use : 81 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.1.2007 ISO compilation 22:45:05 #1 Text 0 File Isodoc.cpp, Line 6475 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : FALSE 22:45:05 #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 81920KB of Memory 22:45:05 #3 Text 0 File Reader.cpp, Line 124 Reader running 22:45:05 #4 Text 0 File Writer.cpp, Line 122 Writer PHILIPS DVDR1660P1 running 22:45:05 #5 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 22:45:05 #6 Text 0 File Burncd.cpp, Line 3305 Turn on Disc-At-Once, using DVD media 22:45:05 #7 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2239887 (497:45.12, 4374MB) 22:45:05 #8 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO 22:45:05 #9 Text 0 File DlgWaitCD.cpp, Line 2612 Recorder: PHILIPS DVDR1660P1, Media type: DVD+R 22:45:05 #10 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 22:45:05 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2239888 (2239888) = #2239888/497:45.13 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2239888 blocks [PHILIPS DVDR1660P1] -------------------------------------------------------------- 22:45:05 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [PHILIPS DVDR1660P1] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4587290624, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2239888 | lead-out | 1 | 0x41 | 0x00 22:45:05 #13 Text 0 File SCSIPassThrough.cpp, Line 38 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 22:45:05 #14 Text 0 File SCSIPassThrough.cpp, Line 83 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 22:45:05 #15 Phase 24 File dlgbrnst.cpp, Line 1685 Caching of files started 22:45:05 #16 Text 0 File Burncd.cpp, Line 4145 Cache writing successful. 22:45:05 #17 Phase 25 File dlgbrnst.cpp, Line 1685 Caching of files completed 22:45:05 #18 Phase 36 File dlgbrnst.cpp, Line 1685 Burn process started at 2.4x (3,324 KB/s) 22:45:05 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 22:45:05 #20 SPTI -1066 File SCSIPassThrough.cpp, Line 289 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 Buffer x04780600: Len x804 22:45:05 #21 Text 0 File DVDR.cpp, Line 6328 Drive: PHILIPS DVDR1660P1 Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 22:45:05 #22 CDR -1207 File DVDR.cpp, Line 5463 Book Type automatically set to: DVD-ROM 22:45:05 #23 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: Yes 22:45:11 #24 SPTI -1176 File SCSIPassThrough.cpp, Line 289 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x72 Sense Qual: 0x01 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 72 01 Buffer x04410000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 22:45:11 #25 CDR -1176 File Writer.cpp, Line 311 Session fixation error D: PHILIPS DVDR1660P1 22:45:11 #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 22:45:11 #27 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 22:45:11 #28 Phase 127 File dlgbrnst.cpp, Line 1685 Generating DVD high compatibility borders 22:45:11 #29 Phase 129 File dlgbrnst.cpp, Line 1685 Generating DVD borders completed successfully 22:45:11 #30 Text 0 File DVDR.cpp, Line 6328 Drive: PHILIPS DVDR1660P1 Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 22:45:11 #31 Phase 38 File dlgbrnst.cpp, Line 1685 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 05:12:26 (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 23/03/2006 17:15:58 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 23/03/2006 17:15:56 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 23/03/2006 17:00:28 (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi. This is a buggy version of Nero. Uninstall, run the Nero 6 Clean Tool, and then install version 6.6.0.18 from the two links below: Package 1: http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe Package 2: http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe You have a lot of memory in use at the time of burning. Shutdown any unnecessary programs and don't multitask. The Nero InCD packet writing software has been known to interfere with burning. Unless you really need and use it, use the Nero InCD Clean Tool to remove it: http://ww2.nero.com/nero6/eng/InCD_Clean_Tool.html Accordig to the Philips site you have the latest firmware available for that burner P1.6. http://www.storageupdates.philips.com/en/dvdrw.html The Logik +R disks you're using are of poor quality. They are made by CMC Magnetics most of the time I think. It appears your burner firmware doesn't even recognize them which may be accounting for the errors. Try to use good quality media like Verbatim, Taiyo Yuden, and made in Japan labeled Fuji and Sony disks. You might try increasing your burn speed to 4X. You might also try uninstalling/resetting your burner with Device Manager as follows" - Right click on My Computer and select Properties. - Click the Hardware tab and the Device Manager button. - Click the "+" symbol beside DVD/CD-ROM Drives. - Right click on the name of your burner Philips DVDR1660P1 and select Uninstall. - Click OK and restart your system. Let us know if any of the above solves your problems. Edit: Added text below: Since you're burning an ISO image file, try using ImgBurn (free): http://www.imgburn.com
Thank you for your quick reply. Before I read it I had another go this time using Philips DVD +RW discs and got the following error; I will do as you say though and will let you know how it goes. Thank you again! I appreciate it. Code: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 NT-SPTI used Nero Version: 6.6.1.4 Internal Version: 6, 6, 1, 4d Recorder: <PHILIPS DVDR1660P1> Version: P1.5 - HA 1 TA 0 - 6.6.1.4 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <PHILIPS DVDR1660P1 >Version: P1.5 - HA 1 TA 0 - 6.6.1.4 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD600AB-77BVA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3802110A atapi Port 0 ID 1 DMA: On CdRomPeripheral : PHILIPS DVDR1660P1 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === PHILIPS DVDR1660P1 D: CDRom0 HL-DT-ST CD-RW GCE-8160B E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (83886080) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1047992kB) Free physical memory: 334MB (342700kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.1.2007 ISO compilation 15:53:12 #1 Text 0 File Isodoc.cpp, Line 6475 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 15:53:12 #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 81920KB of Memory 15:53:12 #3 Text 0 File Reader.cpp, Line 124 Reader running 15:53:12 #4 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 15:53:42 #5 Text 0 File Burncd.cpp, Line 3305 Turn on Disc-At-Once, using DVD media 15:53:42 #6 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2240111 (497:48.11, 4375MB) 15:53:42 #7 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO 15:53:42 #8 Text 0 File DlgWaitCD.cpp, Line 2612 Recorder: PHILIPS DVDR1660P1, Media type: DVD+RW 15:53:42 #9 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 15:53:42 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2240112 (2240112) = #2240112/497:48.12 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2240112 blocks [PHILIPS DVDR1660P1] -------------------------------------------------------------- 15:53:42 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [PHILIPS DVDR1660P1] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4587749376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2240112 | lead-out | 1 | 0x41 | 0x00 15:53:43 #12 Text 0 File SCSIPassThrough.cpp, Line 38 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 15:53:43 #13 Text 0 File SCSIPassThrough.cpp, Line 83 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 15:53:43 #14 Phase 24 File dlgbrnst.cpp, Line 1685 Caching of files started 15:53:44 #15 Text 0 File Burncd.cpp, Line 4145 Cache writing successful. 15:53:44 #16 Phase 25 File dlgbrnst.cpp, Line 1685 Caching of files completed 15:53:44 #17 Phase 36 File dlgbrnst.cpp, Line 1685 Burn process started at 2.4x (3,324 KB/s) 15:53:44 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 15:53:44 #19 SPTI -1066 File SCSIPassThrough.cpp, Line 289 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 Buffer x040e0200: Len x804 15:53:44 #20 Phase 98 File dlgbrnst.cpp, Line 1685 Start formatting disc before burning 15:53:50 #21 SPTI -1135 File SCSIPassThrough.cpp, Line 289 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 12 00 00 00 00 0C 15:53:50 #22 Phase 101 File dlgbrnst.cpp, Line 1685 Formatting disc failed 15:53:50 #23 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: Yes 15:53:50 #24 CDR -1135 File ThreadedTransferInterface.cpp, Line 1799 Write error D: PHILIPS DVDR1660P1 15:53:50 #25 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799 Could not perform start of Disc-at-once 15:53:50 #26 Phase 38 File dlgbrnst.cpp, Line 1685 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 05:12:26 (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 23/03/2006 17:15:58 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 23/03/2006 17:15:56 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 23/03/2006 17:00:28 (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi. Did you change the firmware on your drive? In your first post, it's version P1.6. In this latter post, it's P1.5.
Hi LaddyBoy Yeah, I did. I thought maybe that was the issue so I downgraded it. Funnily enough, the problem I was having were discs were not reconised does seem to have gone away as a result. I will keep it at this version for now and if the problems persist will try and upgrade it again. Thanks again for your help!
@Balearic You might want to install a better version of Nero 6.6; Nero 6.6.0.18 which will let Shrink integrate with Nero 6.6. 6.6.1.4 will not autoburn with Shrink. To Go Back To Nero 6.6.0.18 Write down your nero serial# and then uninstall version 6.6.1.4 from your system using the general cleantool found here: http://ww2.nero.com/nero6/enu/General_CleanTool.html After using the clean tool you might want to use a registry cleaner like ccleaner which is free here: http://www.ccleaner.com/download/downloadpage.aspx?1 Then defrag your HDD Next, download and install version 6.6.0.18 from the links provided, re-enter the serial# and you're good to go. nero version 6.6.0.18 updates: Package 1 http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe Package 2 http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe Do Not install InCD, just the two above packages 1 and 2
Hi Laddyboy Just followed your instructions. I used the clean tools and then reloaded Nero 6 without InCD and installed the patches you recommended. Also I reinstalled the DVD drive as per your instructions. Unfortunetly it continues not to work, although I have had a single sucessful copy yesterday. Do you think the drive maybe faulty all the same? Here is the log; Thank you again for your help! Code: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e Recorder: <PHILIPS DVDR1660P1> Version: P1.6 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <PHILIPS DVDR1660P1 >Version: P1.6 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD600AB-77BVA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3802110A atapi Port 0 ID 1 DMA: On CdRomPeripheral : PHILIPS DVDR1660P1 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === PHILIPS DVDR1660P1 D: CDRom0 HL-DT-ST CD-RW GCE-8160B E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1047992kB) Free physical memory: 534MB (547088kB) Memory in use : 47 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.1.2007 ISO compilation 17:38:42 #1 Text 0 File Isodoc.cpp, Line 6359 Iso document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : FALSE 17:38:43 #2 Text 0 File Reader.cpp, Line 127 Reader running 17:38:43 #3 Text 0 File Writer.cpp, Line 122 Writer PHILIPS DVDR1660P1 running 17:38:43 #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 17:38:43 #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 17:38:44 #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1348751 (299:43.26, 2634MB) 17:38:44 #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 17:38:44 #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PHILIPS DVDR1660P1, Media type: DVD+RW 17:38:44 #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 17:38:44 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1348752 (1348752) = #1348752/299:43.27 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1348752 blocks [PHILIPS DVDR1660P1] -------------------------------------------------------------- 17:38:44 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PHILIPS DVDR1660P1] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2762244096, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1348752 | lead-out | 1 | 0x41 | 0x00 17:38:44 #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 17:39:56 #13 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 17:39:56 #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 17:39:56 #15 Phase 28 File dlgbrnst.cpp, Line 1832 Speed measurement started 17:39:56 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 17:44:28 #17 Text 0 File WriterStatus.cpp, Line 116 <PHILIPS DVDR1660P1 > start writing Lead-Out at LBA 1348752 (149490h), lenght 0 blocks 17:44:28 #18 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 17:44:28 #19 Phase 29 File dlgbrnst.cpp, Line 1781 Speed measurement completed: 7.2x (10,054 KB/s) 17:44:28 #20 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 17:44:28 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 17:44:28 #22 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03AF6600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 17:44:28 #23 Phase 98 File dlgbrnst.cpp, Line 1832 Start formatting disc before burning 17:44:38 #24 SCSI -1135 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x0C 0x00 17:44:38 #25 Phase 101 File dlgbrnst.cpp, Line 1832 Formatting disc failed 17:44:38 #26 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 17:44:38 #27 CDR -1135 File ThreadedTransferInterface.cpp, Line 1778 Write error 17:44:38 #28 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778 Could not perform start of Disc-at-once 17:44:38 #29 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 05:12:26 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi. It could be that your burner is bad or that it isn't caring for the media you're feeding it. The Nero log is not indicating the actual manufacturer of the media you're using and that's never a good sign and indicates something is wrong. I would like you to try burning the ISO with ImgBurn. It's a free program. If that works, there's a problem with Nero and your burner. If it doesn't, it adds evidence that your burner is faulty. Don't use RW media with ImgBurn. See if it'll burn a -R or +R disk. http://www.imgburn.com The only way to really test to see if the burner is bad or if it's a problem with your system is to install the burner in another system to see if it works there or not. If it doesn't, it's likely bad. If it does, there''s something in your system causing the problem that needs identifying.