1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Simple question

Discussion in 'Nero discussion' started by cr91rider, Jan 29, 2007.

  1. cr91rider

    cr91rider Member

    Joined:
    Jan 30, 2005
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    I am using dvd shrink and nero 7. Now i will shrink the movie and put it to my HD, but i cannot figure out how to burn the movie from nero.(i cant find the file from Nero.) Any help would be appreciated.
    thanks
     
  2. born2ride

    born2ride Regular member

    Joined:
    Sep 13, 2006
    Messages:
    1,069
    Likes Received:
    0
    Trophy Points:
    46
  3. cr91rider

    cr91rider Member

    Joined:
    Jan 30, 2005
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    yes i have tried these guides as well and still cant get it to work. This is what i do.
    I initially do to shrink and save it to my HD, then i cannot find the file in Nero. Also, i keep getting an error in Decrypter so i do not use it anymroe.
     
  4. born2ride

    born2ride Regular member

    Joined:
    Sep 13, 2006
    Messages:
    1,069
    Likes Received:
    0
    Trophy Points:
    46
    cr91rider
    what movie are you doing? what error code?
    if you use shrink to rip to hd then open in nero do you get a protection error?
    open nero,then recode,then either full/main dvd,then import dvd.
    now is this where you cant find ?
     
    Last edited: Jan 31, 2007
  5. cr91rider

    cr91rider Member

    Joined:
    Jan 30, 2005
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    OK
    i have used many differnt DVD's. Old ones that i have already burned and new ones that i have not burned. What i would do it use shrink and decrypeter and that is all. I did not have nero untill recently. As of right now, I cannot burn ANY dvd's. I have tried many differnt ways but still wont work. I dont know how to take a snapshot of the error or i would post it
    thanks
     
  6. born2ride

    born2ride Regular member

    Joined:
    Sep 13, 2006
    Messages:
    1,069
    Likes Received:
    0
    Trophy Points:
    46
    what error message are you getting.
     
  7. cr91rider

    cr91rider Member

    Joined:
    Jan 30, 2005
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    OK like i have said i will go to shrink and try and shrink the movie. I was advised to get ANYDVD. So first off i shrink the dvd and it will basically finish, and then i will get this error.

    4C
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero API version: 7.2.3.3
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Nero\Nero 7\Core\
    Application: ahead\Nero - Burning Rom
    Internal Version: 7, 2, 3, 3

    Recorder: <PIONEER DVD-RW DVR-109> Version: 1.09 - HA 1 TA 1 - 7.2.3.3
    Adapter driver: <IDE> HA 1
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : HDS728080PLAT20 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST RW/DVD GCC-4481B atapi Port 1 ID 0 DMA: Off
    CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST RW/DVD GCC-4481B D: CDRom0
    PIONEER DVD-RW DVR-109 E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 1014MB (1039088kB)
    Free physical memory: 577MB (591536kB)
    Memory in use : 43 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.2.2007
    NeroAPI
    2:15:15 PM #1 Phase 112 File APIProgress.cpp, Line 278
    DVD-Video files reallocation started

    2:15:15 PM #2 DVDREALLOC -21 File DVDVideoCompilation.cpp, Line 1217
    Required file 'VTS_11_0.VOB' is not present

    2:15:15 PM #3 Phase 115 File APIProgress.cpp, Line 278
    DVD-Video files reallocation failed

    2:15:15 PM #4 Text 0 File NeroAPIBurnFS.cpp, Line 213
    Failed to realloc DVD video files


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon


    Also, after the shrink i use decrypter and normally it would just go to decrypter from shrink. It does not do that now. Also when i look in my HD for any of the files of the movie, There is a folder with what seems to be the files but nothing is in there. Hope this helps i am so frustrated with this.
     
    Last edited: Feb 2, 2007
  8. cr91rider

    cr91rider Member

    Joined:
    Jan 30, 2005
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
  9. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Hi cr91rider
    1st let's edit out the serial # - top of log begins w/ 4C.

    There's a few movies (sony & lionsgate one - like Saw 3, Open Season, Grudge 2) that AnyDVD and Shrink won't work with. Reason you're getting this error.

    Nero API version: 7.2.3.3
    Update Nero to the latest - here's a link
    You should be able to run AnyDVD (version 6.1.1.4) w/ Nero's Recode instead of Shrink.

    A few more suggestions:

    °You can use AnyDVD companion - CloneDVD - has a 21 day trial.

    °Rip 1st w/ DVDFab Decrypter then open those files in Shrink or Recode. link

    °RipIt4Me - which also uses Shrink and Decrypter and gives them the they need to handle the newer copy protections. link

    CdRomPeripheral : HL-DT-ST RW/DVD GCC-4481B atapi Port 1 ID 0 DMA: Off Turn DMA back on for this drive. Here's a guide.

    Recorder: <PIONEER DVD-RW DVR-109> Version: 1.09
    Firmware is a bit behind too - update it to the latest 1.58.
    If this is a Medion pc the latest is 1.57.

    Give that a go and let us know.
     
  10. cr91rider

    cr91rider Member

    Joined:
    Jan 30, 2005
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    Not to be a bug, But i am having a hard time understanding this. I have downloaded all the appropriate hardware. Is there a guide somewhere for these programs? I have DVD FAB,Rip it for me, and ANY DVD.
    Thanks a lot guys you have been a huge help so far.
     
  11. Saltgrass

    Saltgrass Regular member

    Joined:
    Apr 2, 2006
    Messages:
    1,116
    Likes Received:
    0
    Trophy Points:
    46
    When you get all the other stuff figured out, you might check on the following:
    Having a slave with a master and the DMA is off(as binkie7 said), may not be a good deal. Try to get the DMA on for the Master (GCC-4481B), and you might even think about making the Burner (Pioneer) the master and setting the other one to slave.
     
    Last edited: Feb 3, 2007
  12. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    You're not being a bug cr91rider - no worries.

    In the link for RipIt4Me is a step by step guide on set it up and how to use.

    Here's a guide for for DVDFab Decrypter - you can just use the 1st part to show you how to use then open those files in Shrink. link

    Have AnyDVD turned off when you use either of these programs.

    Keep us posted!
     
  13. born2ride

    born2ride Regular member

    Joined:
    Sep 13, 2006
    Messages:
    1,069
    Likes Received:
    0
    Trophy Points:
    46
    binkie
    you gave out my favorite link....lol

    you wrote
    "Update Nero to the latest - here's a link" link was underlined thats what i been trying to do still.

    cr91rider. how are you making out?
     
  14. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    @born2ride
    Maybe this pic will help:

    [​IMG]

    Then you will get something like this (remove the asterisks)and type in what you want the link to say between the brackets.
    [*url=http://afterdawn.com]Afterdawn[/url*]

    That will look like this when displayed
    Afterdawn
     
  15. cr91rider

    cr91rider Member

    Joined:
    Jan 30, 2005
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    OK Guys first off, i really want to thank all you that helped me out. You guys helped me sooo much. I just wanted to give an update and another question. I have successfully burned 2 dvds(for the first time in about 3/4 months)So my next question is I am using DVDFAB,VOBblanker,Shrink, and IMGburn........with this guide
    http://forums.afterdawn.com/thread_view.cfm/334154
    It has worked great. But i am just wondering how do you know in BLANKER what you ae deleting. THe guide does not go in depth for this. Should i even be messing with it?
    Thanks
     
  16. born2ride

    born2ride Regular member

    Joined:
    Sep 13, 2006
    Messages:
    1,069
    Likes Received:
    0
    Trophy Points:
    46
    cr91rider
    see if this helps you out link

    thanks binkie i am learning so much... hehehehe
     
    Last edited: Feb 7, 2007
  17. cr91rider

    cr91rider Member

    Joined:
    Jan 30, 2005
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    Ya i have read that guide, but i am wondering how you know what to delete and what not to delete. I dont want to delete some of the menu or something like that ya know?
     
  18. born2ride

    born2ride Regular member

    Joined:
    Sep 13, 2006
    Messages:
    1,069
    Likes Received:
    0
    Trophy Points:
    46
    cr91rider
    unfortunately i never used vobblanker. one of theses say i will get around to it.if no one responses start a new thread or search your not the first one to ask i am sure..
    if you do find out more keep me up to date so i can learn.. thanks
     
  19. cr91rider

    cr91rider Member

    Joined:
    Jan 30, 2005
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    Ya i will for sure, all these programs work great so far. Hopefully i dont have any problems down the road
     
  20. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    @cr91rider
    Here's another guide that may help you out - link

    You can can click on a title then preview it - it will also be listed under the PGC screen. if you don't want it you can click on blank at the right.
    May take just a bit of playing w/ to get the hang of.
    You can always start small.

    Also the files will be saved to your hard drive so you can always preview them before you burn them to make sure all ok.

    @born2ride
    Yep you sure are - great job!
     

Share This Page