1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Slide Card HELP PLEASE!!!!!

Discussion in 'PS2 - Software boot discussion' started by broly747, Aug 7, 2004.

  1. broly747

    broly747 Guest

    How do you take the front cover on my V4 PS2?
    MODEN NO. SCPH-39001
    CANNOT FIND PIN?
    DON'T KNOW WHERE TO INSERT SLIDE CARD?
    I NEED HELP PLEASE!!!!!!!!!!!!!!
     
  2. YM2151

    YM2151 Member

    Joined:
    Jul 31, 2004
    Messages:
    70
    Likes Received:
    0
    Trophy Points:
    16
    Slow down there. To remove the front cover, turn on your PS2, eject the tray, once it's out, use the switch on the back of the unit to turn it off. Now get a screw driver, look in the center of the tray on the underside, there is a screw. You need to remove this screw, so you can then pry the plastic cover piece off. Once it's removed, you need to just sorta feel around with the slide card till you understand where the pin is. Don't try to "look" for it with your eyes. You have to feel the resistance when moving the slide tool to really understand what to do.
     
  3. sly_61019

    sly_61019 Senior member

    Joined:
    Jun 28, 2003
    Messages:
    9,522
    Likes Received:
    0
    Trophy Points:
    116
    There may not be a screw (my v4 didn't have one).
     
  4. broly747

    broly747 Guest

    Thanks for the help.
     
  5. broly747

    broly747 Guest

    I found the pin by feeling around.
    When i use my homemade slide card and slide it to the right the tray doesn't open?
    Do i have to pull it out?
    Is it because my homemade slide card
    or my disk drive or what am i doing wrong?
    I am trying to use Breaker Pro to play my import PS1 Game.
     
  6. sly_61019

    sly_61019 Senior member

    Joined:
    Jun 28, 2003
    Messages:
    9,522
    Likes Received:
    0
    Trophy Points:
    116
    yes, you have to pull the tray out with your fingers.
     
  7. broly747

    broly747 Guest

    last question
    I am using Breaker Pro with slide card to play PS1 import.
    after pulling out with fingers and putting import
    in pushing the tray gently close
    do you slide the pin back to the left before pressing
    x?
    Thanks for all the help
     
  8. sly_61019

    sly_61019 Senior member

    Joined:
    Jun 28, 2003
    Messages:
    9,522
    Likes Received:
    0
    Trophy Points:
    116
    yes you need to slide it back to the left.
     

Share This Page