1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

so so so stuck help!

Discussion in 'Xbox 360 - Modding & Hacking' started by darko81, Nov 5, 2007.

  1. darko81

    darko81 Member

    Joined:
    Jul 6, 2006
    Messages:
    21
    Likes Received:
    0
    Trophy Points:
    11
    ok have a ms25 a via vt6421a pci sata card, ive read read and read on what might be going wrong but cant figure it out maybe someone could help...

    today I recieved my via card so I installed and updated the drivers, I iprep my usb pen with the latest FW followed an excellent tut and that was successful, I changed my boot sequence and was able to get to my dos screen also removed any other drivers and disabled my sil3114 onboard Raid. Hooked my 360 up in what ive learnt the right way...

    First I tried iDump (serial) but that just says general failure writing drive C

    I then enter mtkflash r /m orig.bin and am given the option of choosing only 1: EXTREME Pri Master

    wich i choose and it fails...

    so i tried the 10sec trick a few times and it failed and stopped on 1%

    any ideas on why it aint working?? Like i say ive tried looking but ive been at this all day...would be awesome to get some prof. help!!!

    thanks
     
  2. darko81

    darko81 Member

    Joined:
    Jul 6, 2006
    Messages:
    21
    Likes Received:
    0
    Trophy Points:
    11
    any ideas???
     
  3. Mehtevas

    Mehtevas Regular member

    Joined:
    Aug 8, 2007
    Messages:
    103
    Likes Received:
    0
    Trophy Points:
    26
    Turn on the 360
    Boot the PC to dos
    type "mtkflash r /m /sata orig.bin"
    Select Xtreme Primary
    Open the orig.bin file in Windows using FWToolbox to see if you have a valid key.

    Copy orig.bin to the ixtreme folder and run the "make xtreme firmware" command

    Copy the newly created bin file to your pen drive.

    Flash as normal with the command
    "mtkflash w /m /sata ix12.bin"
     
  4. darko81

    darko81 Member

    Joined:
    Jul 6, 2006
    Messages:
    21
    Likes Received:
    0
    Trophy Points:
    11
    ok i get as far the select primary, i press one and then i get

    general failure writing drive C

    abort, retry, ignore, fail
     

Share This Page