The software i use,Nero burning tells me the dvd has burn successfully but when i put the dvd to play in the computer or a dvd player it is not recognize,i used to be able to burn dvds successfully and have them play successfully on the computer and dvd player using Nero,don't know but now when i burn a dvd i get the message saying burning has been completed successfully but it is not recognize buy the computer nor dvd. and by the way im using stapes dvd-rw and dvd-r disc and my dvd burner is a pacfic digital extreme 16x double layer 2.0 dvd drive
i did a system resore thinking it might a might been spyware causing this problem but yet i still have the same problem
Assuming that the burner's firmware is up to date and you haven't changed media brands: Select Nero Tools > Nero Info Tool > Configuration and verify that 'DMA' is 'On'. Then select the tool, 'Nero CD-DVD Speed' and run 'Scan disc' on one of the burned DVD's. If it picks up errors it might indicate that you are burning at too high a speed. The burn log will tell you what speed you are burning at, but 4x is is a safe speed.
actually i did use another brand dvd disc at one point ,sony, then after that everytime i got either burned failed or i got burned successful but when i put it in the computer or play it in the dvd player it doesnt work even after reverting back to the staples dvd disc,the only reason i even used the sony dvd is cause its rw(rewritable), the staples arent, dvd-r.i even tried to erase a movie but i couldnt,got a message saying erase failed.when i have erased movies on a disc before without any problems, is it that bad to use multiple brand dvds to make movies,itl screw up your burner if i knew i woulda just sticked with the staples dvd disc . i burned a movie successfully(using nti cd dvd maker) at a freinds house which actually worked on the dvd and computer that same dvd i was getting burn succfessful on my my computer but did not actually work on the dvd nor computer now i come to the conclusion its probally something with my dvd drive or software/drivers cause i just did a system restore and i im still having the same problems. i hope one of you guys can help me out
Did you use Nero Tools to scan one of the disks that were burned on your computer to see if there were any media errors?
just did it,the dvd that was supposley completed successfully,is a blank dvd,thats what nero info tools is telling me
The Nero log file is in one of these locations. (nerohistory.log) Nero 7: "C:\Programs\Nero\Nero 7\Core" Nero 6: "C:\Program Files\Ahead\Nero Take the last burning session and copy/paste it to a new thread in the Nero Help Forum at Afterdawn. People there can analyze the logs and advise. Note remove the serial number which appears at the start of the log. An example log appears below. ---------------------------------------------------------------- Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2005-11-21 00:48:21 ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-11-02 13:54:32 NT-SPTI used Nero API version: 7.5.1.1 Using interface version: 7.0.5.6 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 5, 1, 1 Recorder: <AOPEN DUW1608/ARR> Version: A110 - HA 1 TA 0 - 7.5.1.1 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : Maxtor 6L250R0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6L200R0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : AOPEN DUW1608/ARR atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8164B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === AOPEN DUW1608/ARR E: CDRom0 HL-DT-ST DVD-ROM GDR8164B F: CDRom1 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523500kB) Free physical memory: 65MB (66796kB) Memory in use : 87 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 18.12.2006 NeroAPI 22:57:32 #1 Phase 111 File APIProgress.cpp, Line 282 DVD-Video files sorted 22:57:33 #2 Text 0 File ThreadedTransfer.cpp, Line 540 ReadBuffer-Pipe got 262144KB of Memory 22:57:33 #3 Text 0 File Reader.cpp, Line 126 Reader running 22:57:33 #4 Text 0 File Writer.cpp, Line 123 Writer E: AOPEN DUW1608/ARR running 22:57:33 #5 ISO9660GEN -11 File Geniso.cpp, Line 3313 First writeable address = 0 (0x00000000) 22:57:33 #6 ISO9660GEN -11 File Geniso.cpp, Line 3313 First writeable address = 0 (0x00000000) 22:57:33 #7 Text 0 File Burncd.cpp, Line 3443 Turn on Disc-At-Once, using DVD media 22:57:34 #8 Text 0 File DlgWaitCD.cpp, Line 300 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2183151 (485:08.51, 4263MB) 22:57:34 #9 Text 0 File DlgWaitCD.cpp, Line 312 Write in overburning mode: NO (enabled: CD) 22:57:34 #10 Text 0 File DlgWaitCD.cpp, Line 2851 Recorder: AOPEN DUW1608/ARR, Media type: DVD-RW Disc Manufacturer: OPTODI - SCW002 Disc Application Code: 64, Disc Physical Code: 214 22:57:34 #11 Text 0 File DlgWaitCD.cpp, Line 484 >>> Protocol of DlgWaitCD activities: <<< ========================================= 22:57:34 #12 Text 0 File ThreadedTransferInterface.cpp, Line 863 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2183152 (2183152) = #2183152/485:8.52 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2183152 blocks [E: AOPEN DUW1608/ARR] -------------------------------------------------------------- 22:57:34 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1079 Prepare recorder [E: AOPEN DUW1608/ARR] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4471095296, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2183152 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2183152 | 0 | 0x00 2183152 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 22:57:34 #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 22:57:34 #15 Phase 24 File APIProgress.cpp, Line 282 Caching of files started 22:57:34 #16 Text 0 File Burncd.cpp, Line 4274 Cache writing successful. 22:57:34 #17 Phase 25 File APIProgress.cpp, Line 282 Caching of files completed 22:57:34 #18 Phase 36 File APIProgress.cpp, Line 282 Burn process started at 2x (2,770 KB/s) 22:57:34 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2746 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 22:57:34 #20 Text 0 File DVDR.cpp, Line 2969 Recording mode: Sequential Recording Mode 22:57:34 #21 Text 0 File DVDR.cpp, Line 3125 Start write address at LBA 0 DVD high compatibility mode: Yes 22:57:34 #22 Text 0 File Cdrdrv.cpp, Line 9215 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-RW (3), Part Version: 1.1x (2) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 23:24:38 #23 Text 0 File WriterStatus.cpp, Line 116 <E: AOPEN DUW1608/ARR> start writing Lead-Out at LBA 2183152 (214FF0h), length 0 blocks 23:24:38 #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 23:24:38 #25 Text 0 File DVDR.cpp, Line 3341 EndDAO: Last written address was 2183151 23:24:38 #26 Phase 181 File APIProgress.cpp, Line 282 Writing lead-out... 23:24:38 #27 Text 0 File DVDR.cpp, Line 3374 Estimated time for 30mm Borders: 0min 00sec 23:25:46 #28 Phase 37 File APIProgress.cpp, Line 282 Burn process completed successfully at 2x (2,770 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2005-11-21 00:48:21 File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 2005-04-25 04:03:00 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
OK here it is ********** Nero Recode ********** Version: 2.5.2.0 Project type: Main Movie to DVD Compilation name: SONY DVD RECORD Target size: DVD5 (2282925) 08:13:45 File LangStreamPatcher.cpp, Line 56 Command table patching started... 08:13:45 File LangStreamPatcher.cpp, Line 135 All tables successfully patched! Burn settings: Target: Hard disk folder Number of copies: 1 Target folder: C:\Documents and Settings\Owner\My Documents\Nero Recode\VIDEO_TS (288755875840 bytes free) Shutdown when finished: false Advanced Analysis: false Compress Adaptive: false 08:13:51 File burn_dvdfiles.cpp, Line 238 Compile DVD: init VTS_01 Title Vobs [13533 vobus] 1977.86MB -> 1977.86MB [R 1.00] Video: 1725.36MB, extra: 252.50MB Audio: 1 streams 0. 0. Dolby Digital 2-ch Unspecified 226.07MB [enabled] Subpicture: 0 streams 08:13:51 File burn_dvdfiles.cpp, Line 1244 Compile DVD: begin copy 1 08:13:51 File NeroRecorder.cpp, Line 129 Writing to harddrive folder started 08:13:51 File burn_dvdfiles.cpp, Line 548 Compile DVD: burning 2282925 sectors (1012740 required) 08:13:51 File burn_dvdfiles.cpp, Line 744 Compile DVD: adjust target size to 4458.84MB (1978.01MB obtained) 08:13:51 File burn_dvdfiles.cpp, Line 594 Compiling DVD Volume started 08:15:19 File NeroRecorder.cpp, Line 629 Added extra file VTS_01_2.VOB 08:16:28 File burn_dvdfiles.cpp, Line 1150 Compile DVD: finished VTS_01 Title Vobs VTS_01 Title Vobs: Original 1977.86MB -> Expected 1977.86MB -> Output 1977.86MB Finished error -0.00MB Ratio encoded = 1 Original encoded = 13532 Slide encoded = 0 StillImage encoded = 0 Output extra size = 252.65MB Source video size = 1725.21MB Pictures Modified [I 1] [P 0] [B 10] 08:16:31 File burn_dvdfiles.cpp, Line 617 Compile DVD: completed successfuly (1978.01MB) 08:16:31 File burn_dvdfiles.cpp, Line 308 Compile DVD: exit
I dont know if this would help but my computer has always recognized my dvd burner as a benq drive it is a pacfic digital dvd burner,its the pacific digital external xtreme 16x double layer burner, this is the burner that i have heres the link http://www.pacificdigital.com/products.asp?gpcid=5&cid=31&scid=117&ItemID=790
Are you selecting the Hard Drive to write the files??Why not the burner? I don't see any reference to your burner???
That isn't what your log is saying. This is an example of what it should say: The GSA-H22N is my burner. Your log says Target: Hard disk folder.
i had an idea,what i did was unstall the driver for the dvd burner then i reinstalled since then ive burn 2 movies successfuly,the ply on the dvd player and computer
