1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Spindle servo failure?

Discussion in 'DVD / Blu-ray drives' started by Yezinki, Jun 7, 2009.

  1. Yezinki

    Yezinki Member

    Joined:
    Feb 25, 2006
    Messages:
    59
    Likes Received:
    0
    Trophy Points:
    16
    Hi there,

    All of a sudden my Sony Vaio’s VGC-LS1, Matshita UJ-846-S DVD-RAM drive failed to read/write any media.

    No disc would read/ write.

    When I insert any disc it gives this error & I can hear the drive trying to read the media but in vain.

    I don't know the voltage it takes, but is attached with a 40 pin cable.

    It's a slim slot loading drive........do other brands manufacture similar that would take its place?

    http://reviews.cnet.com/desktops/sony-vaio...0.html?tag=rnav

    No errors in device manager etc, but when I used Image Burn it gave this error……..didn’t read/write.

    Since it’s my boot optical drive, can’t use my USB Sony DRX-S70U.
    When I click on the drive with a pressed media in, it displays a " I/O device error".

    Hypothetically if the drive is dead what options do I have to replace it?

    What brand, type should I look for.........coz Sony wants to put another Matshita one which I don't like, it hardly can read write all media........very picky.

    What variables should I look for like voltage consumption, pin connector, a drive that would fit in it's place...slim slot loading.

    What other brands are available in slim slot loading?

    What drive should I replace it with & what variable/options should I keep in mind before purchasing a new one?

    Can this be fixed?

    Hoping to hear from you smart geniuses,

    Regards,
     
  2. Yezinki

    Yezinki Member

    Joined:
    Feb 25, 2006
    Messages:
    59
    Likes Received:
    0
    Trophy Points:
    16
    Hi is Creeky still around.......tell him it's his friend from TX.
     
  3. dailun

    dailun Active member

    Joined:
    Mar 16, 2006
    Messages:
    3,074
    Likes Received:
    0
    Trophy Points:
    66
    Every major manufacturer makes a slimline drive. Pick your poison.

    Your biggest problem is going to be finding one with a similar faceplate configuration otherwise you will be running it without a faceplate.

    The front plate form factor and LED/unload switch position are NOT standard.

    I am speaking from experience. I tried to use a Vaio drive in a Thinkpad. It worked electronically but looked like s**t because I had to take the faceplate off for it to fit.
     
    Last edited: Jun 8, 2009
  4. Yezinki

    Yezinki Member

    Joined:
    Feb 25, 2006
    Messages:
    59
    Likes Received:
    0
    Trophy Points:
    16
    Thanks here again.

    I agree must have look bad......but in my office, better to have a laying or external optical drive rather than a non functional stylish one.

    Coz its my boot drive......don't have the option for a USB external optical boot in the BIOS.

    Regards!
     
  5. Yezinki

    Yezinki Member

    Joined:
    Feb 25, 2006
    Messages:
    59
    Likes Received:
    0
    Trophy Points:
    16
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     

Share This Page