1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Sporadic burn failures

Discussion in 'Nero discussion' started by Dewras, Sep 18, 2007.

  1. Dewras

    Dewras Guest

    For the past 6 months, I've been getting sporadic burn failures. Prior to this, I seldom had any failures. I am using DVD Shrink with Nero 6 ultra Edition. I use RipIt4Me to decrypt.

    I have tried other decrpt programs from Slyfox to DVD Fab and still get sporadic burn failures.

    I have a P4 3.0GHZ, with 3 Gigs of memory, running Direct X - 9.0c with a Radeon X600 256 graphics card and SB Audigy 2 ZSAudio card. My burner is a NEC DVD plus minusRW.

    I restarted my PC and the burn worked. Sometimes it takes 2 attempts before it will work.

    I use Taiyo Yuden DVD-R's as the medium and have used them for the past couple of years.


    In this case I was making a back up copy of "Borat". This is the burn failure info on this back up:

    Any suggestions/help would be greatly appreciated.


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
    Nero API version: 6.3.1.13
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <_NEC DVD+-RW ND-3530A> Version: 102B - HA 0 TA 1 - 6.3.1.13
    Adapter driver: <atapi> HA 0
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 11
    Drive is autodetected - recorder class: DVD+R9 DL recorder

    === Scsi-Device-Map ===
    CdRomPeripheral : TSSTcorp DVD-ROM TS-H352C atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD+-RW ND-3530A atapi Port 0 ID 1 DMA: On
    DiskPeripheral : Maxtor 7Y250M0 iaStor Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    TSSTcorp DVD-ROM TS-H352 D: CDRom0
    _NEC DVD+-RW ND-3530A E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 2047MB (2097151kB)
    Free physical memory: 2047MB (2097151kB)
    Memory in use : 18 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    18.9.2007
    NeroAPI
    3:45:37 PM #1 Phase 112 File APIProgress.cpp, Line 273
    DVD-Video files reallocation started

    3:45:37 PM #2 Phase 114 File APIProgress.cpp, Line 273
    DVD-Video files reallocation completed (no file modified)

    3:45:37 PM #3 Phase 111 File APIProgress.cpp, Line 273
    DVD-Video files sorted

    3:45:37 PM #4 Text 0 File Reader.cpp, Line 118
    Reader running

    3:45:37 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    3:45:37 PM #6 Text 0 File Writer.cpp, Line 124
    Writer _NEC DVD+-RW ND-3530A running

    3:45:37 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    3:45:37 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    3:45:37 PM #9 Text 0 File Burncd.cpp, Line 3167
    Turn on Disc-At-Once, using DVD media

    3:45:37 PM #10 Text 0 File DlgWaitCD.cpp, Line 245
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286127 (508:01.52, 4465MB)

    3:45:37 PM #11 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO

    3:45:37 PM #12 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: _NEC DVD+-RW ND-3530A, Media type: DVD-R
    Disc Manufacturer: TYG03 -
    Disc Application Code: 64, Disc Physical Code: 193

    3:45:37 PM #13 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    3:45:37 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [_NEC DVD+-RW ND-3530A]
    --------------------------------------------------------------

    3:45:37 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
    Prepare recorder [_NEC DVD+-RW ND-3530A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2286128 | lead-out | 1 | 0x00 | 0x41

    3:45:38 PM #16 Phase 24 File APIProgress.cpp, Line 273
    Caching of files started

    3:45:38 PM #17 Text 0 File Burncd.cpp, Line 4177
    Cache writing successful.

    3:45:38 PM #18 Phase 25 File APIProgress.cpp, Line 273
    Caching of files completed

    3:45:38 PM #19 Phase 36 File APIProgress.cpp, Line 273
    Burn process started at 6x (8,310 KB/s)

    3:45:38 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2342
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    3:45:38 PM #21 Text 0 File DVDR.cpp, Line 1833
    Recording mode: Sequential Recording Mode

    3:45:38 PM #22 Text 0 File Mmc.cpp, Line 20180
    Set BUFE: JustLink -> ON

    3:45:38 PM #23 Text 0 File DVDR.cpp, Line 1974
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    3:45:38 PM #24 Text 0 File Cdrdrv.cpp, Line 8063
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    3:45:40 PM #25 Text 0 File Cdrdrv.cpp, Line 1293
    15:45:40.890 - _NEC DVD+-RW ND-3530A\H0 T1 : Queue again later

    3:50:40 PM #26 SCSI -1093 File Cdrdrv.cpp, Line 1441
    SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x00B90000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x0A 0xF6 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x02 0x00

    3:50:40 PM #27 CDR -1093 File Writer.cpp, Line 304
    No seek complete

    3:50:40 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    3:50:40 PM #29 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    3:50:40 PM #30 Text 0 File DVDR.cpp, Line 2201
    EndDAO: Last written address was 718527

    3:50:40 PM #31 Phase 38 File APIProgress.cpp, Line 273
    Burn process failed at 6x (8,310 KB/s)

    3:50:40 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 828
    DRM: DRM burn session terminated.

    3:50:40 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 857
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 1/26/2005 3:03:00 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    Thanks a lot.

    Dewars
     
    Last edited by a moderator: Sep 18, 2007
  2. Deadrum33

    Deadrum33 Active member

    Joined:
    Jul 23, 2005
    Messages:
    2,011
    Likes Received:
    0
    Trophy Points:
    66
    Hit the edit pencil on the upper right corner of your post and delete your serial # that starts with 1A23

    There are firmware updates for your burner...
    http://forum.rpc1.org/dl_result.php?kaj=1&isces

    Have you been using the exact same Taiyos the last few years or have you purchased a new pack of that name brand lately?
     
    Last edited: Sep 18, 2007
  3. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    Deadrum33 brought up a good point. You're using TYG03. Are those the same as used in the past? With newer media, firmware can become an issue. The intermittent burning looks more like a driver interference or hardware issue. I'm not the greatest at reading Nero logs, but here is where the problems are stated.

    3:50:40 PM #26 SCSI -1093 File Cdrdrv.cpp, Line 1441
    SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x00B90000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x0A 0xF6 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x02 0x00


    Both SCSI and Medium error are listed. This appears to be a Nero error and not Shrink related. You'd be better off in the Nero forum.

    Not saying it's the problem but I'd check the cables, make sure the optical head is clean and firmware is up to date, and check the media, even if it is TY. Just general housekeeping.
     
  4. Dewras

    Dewras Guest

    Thanks deadrum33. I deleted the serial #. Appreciate the response.
    I have not updated firmware on my burner since I purchased the PC. I will go ahead and do that. Thanks for the link. I buy my Taiyo Yudens from Supermediastore and have been using the same ones for years - TYG03's - as far as I remember.

    I will update the firmware first and see if that corrects the issues. If not I will address each of the other suggestions one at a time.

    Thanks to PAcman777 for your quick response and suggestions.

    Dewars
     
  5. ddp

    ddp Moderator Staff Member

    Joined:
    Oct 15, 2004
    Messages:
    39,071
    Likes Received:
    79
    Trophy Points:
    128
    moved to correct forum
     
  6. Deadrum33

    Deadrum33 Active member

    Joined:
    Jul 23, 2005
    Messages:
    2,011
    Likes Received:
    0
    Trophy Points:
    66
    Thanks DDP...
    Your welcome and let us know how you get on Dewras!
     
    Last edited: Sep 18, 2007
  7. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    Thanks ddp.

    Dewras
    You're welcome. Just general maintenance items though. It may be something else. Now that ddp put the thread in the Nero section, maybe you can get more specialized suggestions. I do remember that some of the Nero 6 versions were bug ridden. I've not used 6 in so long, I've forgotten which they were.

    Shortly we're to have Nero 8. If anything like 7, it should be a big update instead of a new version they want paid for.

    Good luck with the problem. By the way, have you tried another burner program to see if the problem is limited to Nero? CopyToDVD from VSO and the burner ware in DVD Decrypter are both supported in DVD Shrink. VSO has a trial, the CopyToDVD is retail. DVD Decrypter is free and the updated burner ware version is ImgBurn. You can burn manually with ImgBurn if you can't find the Shrink.exe file to update for it. Plenty of options to see if the problem is Nero or something else.

     
  8. Dewras

    Dewras Guest

    I just finished a new backup burn of a new movie and it worked fine the first time. Thanks to all for your suggestions. I believe upgrading the firmware on my burner did the trick.

    Appreciate all the help.

    Dewars
     
  9. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    You're welcome. Hope you continue to have success.
     

Share This Page