starview 2 "the box" set up help

no worries, it will let ya know whats what. Make sure you have the cables in correctly and you turn the EMU on.

 

Ok tried it on my neighbours and same thing happened. so therefore it must be the box?

 

Its looking like it alright, if you connected it correctly in the neighbours and its not getting any channels.

Just to clarify you have checked the box in your neighbours and yours - The cable is in the cable input on the box - The scart is in the TV output in the box and connected to the TV and when you autoscan on NTL provider, nothing is coming in and no channels are showing loaded when the scan is finished?

 

yes, that it exactly. Could it be the keys are wrong or maybe it needs to be flashed again?

 

Sometimes you need to press the set default key in the secret menu give it a go after the autoscan(by the way dont mention it!)

 

reading post i see it as wrong main coaxial lead from wall to cable input on box that is correct way,not to tv ur using.
coaxial -cable input
scart tv- scart tv
install.,select n*l and autoscan
171 channels found
exit back to menu
1570 and emu to on
exit exit exit
updating - picture comes on
make sure u do not scan thru splitters

 

Any update?

 

Try the incoming N*L b0x on the wall and make sure its plugged into TV and not FM , and it goes into the Sratvi*w "Cable Input"

 

try scanning tw instead of ntl

 

Thanks everyone for all your help. Sorry I havent been in touch, lost broadband in the house the last couple of days. Have tried all you have told me to but still no joy. Dunno whats wrong and cant get in touch with the guy who sold them 2 me. Could it be a problem with the codes?

 

Have you got channels on it or still no channels found ?

Press menu then 1570 and go into nagravision and look at Provider ID 54 01 for N*L and tell us the codes for 00 and 01 ,

Another option is press menu then 1570 and press "Set Default Key" and see if that helps

 

Thanks celtic, I tried "set default key", didnt work so just found new keys and entered them but they didnt work either. they are
00-A9866EEA39EA0949
01-9E408578E7821006
Are these right?

 

Yes them codes are correct , Have you got any channels and what does it say on your screen

 

Havent got passed set-up so still have no channels. I Flashed the b*x again with firmware from eko.4shared.com (Api: 4.50e_E). Dunno If I should have done this cause the b*x i have is ment to update itself?

 

Ok reflashing wont do any harm , I was going to suggest that anyway

Ok try this and see if it works

Menu > Factory Setting
PIN 0000
OK to delete

Turn box off at the back for a minute and turn back on

English > Installation
Choose N*L
Automatic Scan
Press OK
145 Channels found etc
Exit

Press Menu then 1570
Turn EMU key ON

Exit , exit , exit

 

Sorry for all this hastle celtic and thanks for all your help. Tried that and still nothing

 

Its no hassle , dont worry

Ok , Are you doing this from the main feed without any splitters involved , and are you sure digital is available in your area

 

Positive there are no splitters involved and 100% sure digital is in my area cause my neighbour has n*t digital

 

Ok lol

Ok now , Power off SV from the back and disconnect the N*L cable from the back of the Starvi*w and the scart also

Wait one minute and connect the N*L cable back into "Cable Input" port and the scart back into the TV port and turn the power back on

 

Ok, I turned off the b*x at the back, took out the n*l cable from "cable input", took out scart from "tv" port. Waited a min then put it all back in to the right ports, turned it on. I then went into installation, selected n*l, did auto scan and at 100% it says "0 Programs found".