Hello, Please can you help me. There are some channels missing on my starview box on NTL. I am missing the Sky Sports 2 and Zone Horror channels. My brother has got the same starview box with the same software and he can get the missing channels. I have checked his box for the frequencies for Sky Sports 2, which is 731,000khz and Zone Horror, which is 395,000khz. When i do a manual scan for these two channels using the frequencies, the level and quality is 0%. I have also tried automatic scan, but this does not find the missing channels. Is there anyway of searching for the missing channels? Thanks very much.
Thanks for the frequencies. When I do a manual scan on the frequencies provided, the following happens: 1. A manual scan on 411.000 yields all of the channels i already have but no Sky Sports 2. 2. A manual scan on 315,000 has no signal - I get 0% on Level and 0% on Quality. When i do a manual scan, i get no channels found. I have checked the frequencies on my brother's starview box and it is 731,000khz for Sky Sports 2 and 395,000khz for Zone Horror. When I do a manual scan on both of these frequencies, i get no signal - 0% for level and 0% for Quality. Also, my brother and I have old firmware installed in our starview boxes. The information is as follows: API ver: 2.57e_E Boot ver: 7.0 16. Aug. 2006 Does that make a difference? Thanks
It should not make a difference in regards of the channels you are getting . You could try another autoscan and see if it picks it up , check the end of your channel list and it should be there You could update the box to the latest firmwa*e You will need to know if you have a clone or genuine Count the vents on top 18x7 = Clone 25x7 = Genuine Also you can go here to see some pics http://www.freewebs.com/dooby2oon