Discussion in 'Digital TV - UK & Europe' started by dazlee, Feb 5, 2008.
have just got a starview box and can not get in to the emu api ver260 can anyone help please
You need to reflash it. Is it a Starview 1 or 2 called the box?
its called the box but he said it was starview 2 ihav conected my null 9 pin lead but i dont know wher to get the softweare from ihave the gtrom but other softwear can u help at the monet it as got apiver 260e boot ve:7.0 9april.2007
All firmware/loader can be found in the link at the end of my post marked Eamos Library.
You will need the GTromloader, (Starvi*w Software Uploader), found in the Starvi*w software folder of the link.
You will need version 4.50 firmware IRELAND for THE B0X found in "THE B0X" firmware folder.
You will need version 4.51 firmware UK for THE B0X found in "THE B0X" firmware folder.
Connect your box and PC with a Null modem cable and switch on the cable box and put it on STANDBY.
(The Starvi*w does not need to be connected to TV to update it with GTROM)
Open GTROM Loader software make sure that you set the correct COM PORT
that matches the one that is being used
Make sure App file only is selected, then click Bin File & browse to the firmware where you downloaded it to on your PC.
Run the GTROM loader by pressing Download and you will see the % progress increase then Download completed message on your PC.
Wait until you see the DOWNLOAD COMPLETE pop up on your PC before removing the NULL MODEM CABLE.
The Starvi*w will then reboot
Disconnect from PC and connect back up to the TV
thanks alot my box is now working thanyou again
Youre welcome and cheers Celt
Separate names with a comma.