Just got a starview box for my mate who lives in clane , co.kildare, He cant get any channels at all, when auto scans says no channels found. I have 2 boxes myself and both working grand.--but i am dublin city. is code for kildare different ? he is on N*l also Any help appreciated.
This could be because the EMU is turned off, to check if it is press the ‘Menu’ button on your remote and enter 1570, this will bring up another menu, look down the bottom of this and you will see ‘Key EMU’ make sure this is always ON.
was going to buy a starview box from wizardsatellite but this pops up at the top of the page PROTX DIRECT IS USING A TEST TRANSACTION MODE does anybody know what this thanks
you might have to reset the settings then scan again.goto menu and ok factory settings put in password this will reset every thing.click ok on english then press 1570 and turn on emu key.then go to installation and run a scan.when finished exit all the way back and stations should be working.
somebody suggested that they are not receiving direct N*L, but from a mast as they are outside Dublin. Would this be the reason cant find channels ? ANY VIEWS, ANYBODY. tHANKS
Yes it could be , Are you sure he has N*L and not Chor*s ? Make sure the main feed is plugged into "Cable Input" at the back of the b0x
Hi guys, sorry bout this but still stuck with problem in Clane, with starview box, have tried factory reset & new scan etc, but still have no channels. My mate is definetly on N*L not Cho**s. Have checked all cables in correctly, and it is a genuine starview. Can anybody help please , all ideas welcome. Thanks.
Try , menu > installation , choose provider > manual scan , "Down Freq" , type in 402000 and press OK See if any channels come up by manual scan
Still in same boat, I know i am a nuisance , but have tried down freq 402000 - no chanels found. any more ideas.?
Best of doing a factory setting Menu > Factory Setting PIN 0000 OK to delete Turn box off at the back for a minute and turn back on English > Installation Choose Provider etc Automatic Scan Press OK Channels found Exit Menu 1570 Turn EMU key ON Exit , exit , exit
Hi Celt, in for a nosey and then out for the game, same as yourself I bet so only here for a few mos LOL Regards Clane. N** recently took it over from Clane Cable Systems and as far as I am aware it is still only analogue, it is supposed to be on the upgrade list, but God knows when.
Hi Scouser , yep just here for a half hour or so , multi-tasking again as usual , dinner nearly done then , relax and watch the footie with a beer or 6
LOL thats perfect multitasking well anything that ends in beer is perfect Right Im off catch you later
Hi, Scouser, I spoke with my mate in Clane, you are spot on, N*L DID only take over recently , i didnt know this or i wouldnt have bee wasting everybodys time. Thanks to all for the help. Good luck to the "POOL" and "The Bhoys" tonight. enjoy the games.