1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Still having burning problems

Discussion in 'DVD Shrink forum' started by Expypate, Feb 2, 2005.

  1. Expypate

    Expypate Guest

    I recently started having problems while burning. I can get 1 out of 3 to complete. I had a Sony drive that I thought had failed. I just installed a Benq DW1620 and still having same problems. I use Shrink/Nero and reinstalled both. No changes in media........

    Here is the Shrink log.

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 7:06:00 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM
    Nero API version: 6.6.0.1
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <BENQ DVD DD DW1620> Version: B7H9 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : ST3120026A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : BENQ DVD DD DW1620 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : TOSHIBA DVD-ROM SD-M1712 atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    BENQ DVD DD DW1620 D: CDRom0
    TOSHIBA DVD-ROM SD-M1712 E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 231MB (237208kB)
    Memory in use : 54 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.2.2005
    NeroAPI
    6:54:33 PM #1 Phase 112 File APIProgress.cpp, Line 276
    DVD-Video files reallocation started

    6:54:33 PM #2 Phase 114 File APIProgress.cpp, Line 276
    DVD-Video files reallocation completed (no file modified)

    6:54:33 PM #3 Phase 111 File APIProgress.cpp, Line 276
    DVD-Video files sorted

    6:54:33 PM #4 Text 0 File Reader.cpp, Line 127
    Reader running

    6:54:33 PM #5 Text 0 File Writer.cpp, Line 122
    Writer BENQ DVD DD DW1620 running

    6:54:33 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    6:54:33 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    6:54:33 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    6:54:33 PM #9 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-At-Once, using DVD media

    6:54:34 PM #10 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2297887 (510:38.37, 4488MB)
    Last address to be written: 2286175 (508:02.25, 4465MB)

    6:54:34 PM #11 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO

    6:54:34 PM #12 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: BENQ DVD DD DW1620, Media type: DVD-R
    Disc Manufacturer: Prodis - cS03
    Disc Application Code: 64, Disc Physical Code: 193

    6:54:34 PM #13 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    6:54:34 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286176 (2286176) = #2286176/508:2.26
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286176 blocks [BENQ DVD DD DW1620]
    --------------------------------------------------------------

    6:54:34 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [BENQ DVD DD DW1620] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682088448, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2286176 | lead-out | 1 | 0x00 | 0x41

    6:54:34 PM #16 Phase 24 File APIProgress.cpp, Line 276
    Caching of files started

    6:54:34 PM #17 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    6:54:34 PM #18 Phase 25 File APIProgress.cpp, Line 276
    Caching of files completed

    6:54:34 PM #19 Phase 36 File APIProgress.cpp, Line 276
    Burn process started at 4x (5,540 KB/s)

    6:54:34 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    6:54:34 PM #21 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode

    6:54:34 PM #22 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Seamless Link -> ON

    6:54:34 PM #23 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    6:54:34 PM #24 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    6:54:34 PM #25 Text 0 File DVDR.cpp, Line 5367
    Drive: BENQ DVD DD DW1620
    Book Type request: DVD-ROM
    Drive doesn't support changing Book Type for DVD-R

    7:04:41 PM #26 SCSI -1135 File Cdrdrv.cpp, Line 1432
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00C90000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x0D 0x64 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12
    0x00 0x00 0x00 0x00 0x0C 0x00

    7:04:41 PM #27 CDR -1135 File Writer.cpp, Line 311
    Write error

    7:04:41 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    7:04:42 PM #29 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    7:04:42 PM #30 Text 0 File DVDR.cpp, Line 2410
    EndDAO: Last written address was 877791

    7:04:42 PM #31 Text 0 File DVDR.cpp, Line 5367
    Drive: BENQ DVD DD DW1620
    Book Type request: DVD-ROM
    Drive doesn't support changing Book Type for DVD-R

    7:04:42 PM #32 Phase 38 File APIProgress.cpp, Line 276
    Burn process failed at 4x (5,540 KB/s)

    7:04:42 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    7:04:42 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 7:06:00 AM

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  2. Veblin

    Veblin Active member

    Joined:
    Feb 27, 2003
    Messages:
    1,241
    Likes Received:
    0
    Trophy Points:
    66
    Nero version 6.6.0.1.
    Current available Nero version 6.6.0.6.
    http://www.nero.com/us/nero-up.php
    Firmware B7H9.
    Current available firmware B7T9.
    http://forum.rpc1.org/dl_firmware.php?download_id=1905
    Disc's are OK but are DVD-R.
    Other users of these BENQ drives also have problems burning DVD-R. Try DVD+R and other brands of disc's.
    Updating the firmware might help with the type of disc's that can be burned.
     
    Last edited: Feb 2, 2005
  3. saugmon

    saugmon Senior member

    Joined:
    Oct 9, 2004
    Messages:
    6,064
    Likes Received:
    1
    Trophy Points:
    116
    I am a benq 1620 user. Maxell -4x yellow tops work great.Media codes:ritek go4,mxlrgo2,ty go1's. Even the -8x gold tops,coded mxlrgo3 are working great. I still have original b7c9 firmware and no issues.My other pc burner and many stand alones cannot tell a difference between these - maxell's and + mitsubishi and ricohjpno1.Near perfect quality backups,no playback issues whatso ever.

    I have not burned any prodiscs yet.

    I use nero 6.0.0.18,or so,along with dvd shrink on 95% of my backups and have no issues.

    Try slowing down the burn speed on those prodiscs,you might have to go to 1x.Since you are using the same batch for the benq and the sony burners,you may have gotten a hold of a bad batch.

    How far into the burn do they error out and is it always in about the same Burn % or different areas?

    Here's a handy free trial program to tell you if you have any errors on those prodiscs,before and after burning: http://dvdinfopro.com
     
  4. Expypate

    Expypate Guest

    I updated Nero, but that didn't help. Firmware is next. I have about 75 good burns each on 100 packs of both my -R & +R media. It seems to die in random spots. My last burn went to 49%. I've had it die as early as 3% also. I will try some different media and updating the firmware tonight.
     
  5. Veblin

    Veblin Active member

    Joined:
    Feb 27, 2003
    Messages:
    1,241
    Likes Received:
    0
    Trophy Points:
    66
    @saugmon

    There is currently no free version of DVDINFOPRO. The previous free version has expired and has not been replaced. The authors way of making people buy the program. There may be another free version sometime in the future.
     
  6. saugmon

    saugmon Senior member

    Joined:
    Oct 9, 2004
    Messages:
    6,064
    Likes Received:
    1
    Trophy Points:
    116
    Hey veblim,my bad- I haven't used it for a while and this is the first news I heard about getting rid of the free trial. I very seldom used it.I got dvd identifier to check out my manufacturers codes and never took advantage of the error scans.
     
  7. Expypate

    Expypate Guest

    I updated the firmware and Nero. Shrink stopped burning the -R at 29%. It doesn't give an error, it just freezes. Anybody know of media that the Benq DW1620 likes for sure?
     
  8. saugmon

    saugmon Senior member

    Joined:
    Oct 9, 2004
    Messages:
    6,064
    Likes Received:
    1
    Trophy Points:
    116


    Anybody know what media benq dw1620 likes for sure?:

    I did mention in my earlier post,maxell -4x yellotops.3 different manufacturers,but all 3 are very good quality.
     
  9. Expypate

    Expypate Guest

    Thanks.....I'll give them a shot.
     
  10. eascoast

    eascoast Member

    Joined:
    Dec 10, 2004
    Messages:
    14
    Likes Received:
    0
    Trophy Points:
    11
    I think either your system is too slow or your having a heating problem
     
  11. Sunwish

    Sunwish Member

    Joined:
    Jan 15, 2004
    Messages:
    9
    Likes Received:
    0
    Trophy Points:
    11
    Would you like to change to Nero 6.6.0.5?
     
  12. Expypate

    Expypate Guest

    I already upgraded Nero. The computer is a 2.4 P4 and I have burned 150+ movies. This problem just started. The chip seems to be running at the correct temp, but I will check it out.
     

Share This Page