Before last week I had no problems using and successfully copy/burning dvds using DVD-Shrink 3.2 and of coarse it was tied into Nero 6 to burn, but starting last week I can only copy/burn one DVD and then I must reboot my system to start another successfull burn, I had not added any new software or downloads to my PC this just started to be a never ending problem, I've searched all over the net for suggestions and ideas, I've read a few problems in this forum with simular troubles, I've tried the solutions and non haved worked, I have listed all the tried solutions and at the bottom I have copied in my error report. I've, re-installed my OS, I've added Norton sec 2007, I've changed my Nero drive speed, Ive checked my IDE primary and secondary nothing has changed from previous useage. So if anyone has any other suggestions/solutions for me pleas please fill free to help. . remember I can burn one dvd when I cut my system on, but it is impossible to do another with out shutting down my computer and cutting it back on... Here is the burn error report Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 9:35:32 AM Nero API version: 6.6.0.13 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\nero\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 13c Recorder: <SONY DVD RW DW-Q120A> Version: PYS1 - HA 1 TA 0 - 6.6.0.13 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder === Scsi-Device-Map === DiskPeripheral : ST3500641A atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DW-Q120A atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DW-Q120A atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === SONY DVD RW DW-Q120A D: CDRom0 SONY DVD RW DW-Q120A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 510MB (522240kB) Free physical memory: 173MB (178116kB) Memory in use : 65 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 23.5.2007 NeroAPI 4:53:14 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 4:53:14 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 4:53:14 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 4:53:14 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 4:53:14 PM #5 Text 0 File Writer.cpp, Line 122 Writer SONY DVD RW DW-Q120A running 4:53:14 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 4:53:14 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 4:53:14 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 4:53:14 PM #9 Text 0 File Burncd.cpp, Line 3167 Turn on Disc-At-Once, using DVD media 4:53:45 PM #10 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2259231 (502:03.06, 4412MB) 4:53:45 PM #11 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO 4:53:45 PM #12 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: SONY DVD RW DW-Q120A, Media type: DVD-R Disc Manufacturer: ISSM - R02 Disc Application Code: 64, Disc Physical Code: 193 4:53:45 PM #13 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.) 4:53:45 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2259232 (2259232) = #2259232/502:3.7 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2259232 blocks [SONY DVD RW DW-Q120A] -------------------------------------------------------------- 4:53:45 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [SONY DVD RW DW-Q120A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4626907136, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2259232 | lead-out | 1 | 0x41 | 0x00 4:53:45 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 4:53:45 PM #17 Text 0 File Burncd.cpp, Line 4051 Cache writing successful. 4:53:45 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 4:53:45 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 8x (11,080 KB/s) 4:53:45 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 4:53:45 PM #21 Text 0 File DVDR.cpp, Line 2267 Recording mode: Sequential Recording Mode 4:53:45 PM #22 Text 0 File Mmc.cpp, Line 21469 Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON 4:53:45 PM #23 Text 0 File DVDR.cpp, Line 2421 Start write address at LBA 0 DVD high compatibility mode: Yes 4:53:45 PM #24 Text 0 File Cdrdrv.cpp, Line 8438 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 4:54:08 PM #25 SCSI -1106 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x01710000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x03 4:54:08 PM #26 CDR -1106 File Writer.cpp, Line 311 Power calibration error 4:54:08 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 4:54:08 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 4:54:08 PM #29 Text 0 File DVDR.cpp, Line 2658 EndDAO: Last written address was -1 4:54:08 PM #30 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 8x (11,080 KB/s) 4:54:08 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 4:54:08 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 1/27/2005 7:08:02 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 1/27/2005 7:07:34 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 1/27/2005 7:08:08 PM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) [ + quote] Car.Mike AfterDawn Addict 23. May 2007 @ 21:25 Link to this message GMcGilbra, Welcome to the forum. Below are the errors and things you need to change 1. Recorder: <SONY DVD RW DW-Q120A> Version: PYS1 You are 2 updates behind. Below is an update site you can use http://forum.rpc1.org/dl_firmware.php?category=4&manufactor=30 2. You need to use better disks. Try Verbatim or Taiyo Yuden Disc Manufacturer: ISSM - R02 Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.) 3. You must have Roxio installed. Roxio and Nero do not play correctly so I would suggest that you unistall Roxio totally File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 1/27/2005 7:08:02 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 1/27/2005 7:07:34 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 1/27/2005 7:08:08 PM (InCD4 driver for win NT/2K/XP) 4.. Remove you serial number at the top of your post. It is in the log and it starts w/ 1A20
it looks like you got great advice already you can try this too, dont forget to wrtie down your serial number Uninstall your nero with this clean tool http://www.nero.com/nero6/eng/Nero_6_CleanTool.html then run a registry cleaner then install this most stable version of nero 6 http://www.dvdplusvideo.com/Nero-6.6.0.18_no_yt.exe plus this too http://www.dvdplusvideo.com/NVE-3.1.0.21_no_yt.exe
OK AFTER I TRY TO FULL BACKUP OR EVEN EDIT I STILL GET THIS ERROR AFTER EVERYTHING COMPLETES. **serial number removed** Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero API version: 6.3.1.12 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 1 TA 1 - 6.3.1.12 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITEON DVD-ROM LTD163 D: CDRom0 _NEC DVD_RW ND-2510A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523268kB) Free physical memory: 266MB (273084kB) Memory in use : 47 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.5.2007 NeroAPI 2:01:35 PM #1 Phase 112 File APIProgress.cpp, Line 273 DVD-Video files reallocation started 2:01:35 PM #2 Phase 114 File APIProgress.cpp, Line 273 DVD-Video files reallocation completed (no file modified) 2:01:35 PM #3 Phase 111 File APIProgress.cpp, Line 273 DVD-Video files sorted 2:01:35 PM #4 Text 0 File Reader.cpp, Line 118 Reader running 2:01:35 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 2:01:35 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 2:01:36 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 2:01:36 PM #8 Text 0 File Burncd.cpp, Line 3167 Turn on Disc-At-Once, using DVD media 2:01:36 PM #9 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1644159 (365:22.09, 3211MB) 2:01:36 PM #10 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO 2:01:36 PM #11 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R Disc Manufacturer: RITEKF - 1 Disc Application Code: 64, Disc Physical Code: 193 2:01:36 PM #12 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:01:36 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 1644160 (1644160) = #1644160/365:22.10 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1644160 blocks [_NEC DVD_RW ND-2510A ] -------------------------------------------------------------- 2:01:36 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [_NEC DVD_RW ND-2510A ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3367239680, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1644160 | lead-out | 1 | 0x00 | 0x41 2:01:36 PM #15 Phase 24 File APIProgress.cpp, Line 273 Caching of files started 2:01:36 PM #16 Text 0 File Burncd.cpp, Line 4177 Cache writing successful. 2:01:36 PM #17 Phase 25 File APIProgress.cpp, Line 273 Caching of files completed 2:01:36 PM #18 Phase 36 File APIProgress.cpp, Line 273 Burn process started at 2.4x (3,324 KB/s) 2:01:36 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:01:36 PM #20 Text 0 File DVDR.cpp, Line 1833 Recording mode: Sequential Recording Mode 2:01:36 PM #21 Text 0 File Mmc.cpp, Line 20173 Set BUFE: supported -> ON 2:01:36 PM #22 Text 0 File DVDR.cpp, Line 1974 Start write address at LBA 0 DVD high compatibility mode: Yes 2:01:36 PM #23 Text 0 File Cdrdrv.cpp, Line 8063 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 2:01:36 PM #24 SCSI -1046 File Cdrdrv.cpp, Line 1187 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x19 0x16 0x80 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 2:01:36 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1607 Illegal disc 2:01:36 PM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1607 Could not perform start of Disc-at-once 2:01:36 PM #27 Phase 38 File APIProgress.cpp, Line 273 Burn process failed at 2.4x (3,324 KB/s) 2:01:36 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 828 DRM: DRM burn session terminated. 2:01:36 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 857 DRM: Closing entire DRM handling. Bye. Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) SO IS THERE ANYONE WHO HAVE A CLUE TO WHAT IS GOING ON? I HAVE USED SHRINK AND NERO AS USUAL WITHOUT NO OTHER UPDATES AND NOW ALL OF A SUDDEN I CAN'T BURN NOTHING! MUSIC IS FINE BUT SHRINKING...NO DICE!
nagger, Edit out your serial number that is in the thread Problems are listed below 1.Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 Go to the site below as that burner is behind in the firmware updates: http://forum.rpc1.org/dl_firmware.php?category=4&manufactor=23 2.Disc Manufacturer: RITEKF - 1 Try Verbatim as that is lower quality blank media you are also getting this error code also and it also is about the blank media: 2:01:36 PM #24 SCSI -1046 File Cdrdrv.cpp, Line 1187 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x19 0x16 0x80 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 2:01:36 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1607 Illegal disc 3. The drive is a little old as it came out in 2004. I really think the drive does not properly read the MID codes of the newer disks and thusly can not write the DVD properly. You might consider replacing the drive
