1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Swap Magic 3.6 Sensor Problem

Discussion in 'PS2 - Hardware boot discussion' started by Kight, Apr 24, 2007.

  1. Kight

    Kight Member

    Joined:
    Apr 24, 2007
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    so i just got a kit for swap magic 3.6 and so i opened up the case like every guide says, attempted to put the little cover over the first sensor and it wouldn't fit. i pushed a little harder thinking it was just a tight fit and the sensor itself is now broken. the top piece of the sensor came off and everything inside it is unusable. i'm hoping that the sensor was supposed to simply close a circuit with the switch so that i can somehow possibly permanently close the circuit. the sensor itself is now like a box without a top still attached to the board.

    i don't have a clue on how i can fix this now...
     
  2. Almakra

    Almakra Guest

Share This Page