Hi, I am lost... I was using Nero6 and all creating and burning was perfect... all of a sudden DVDShrink stopped working and I was only able to do some of the Nero functions... Now I can't do anything with Nero... it got to the point that converting Avi's would reboot my computer... burning dvd's would stop with "illegal disk error" and then finally... I couldn't even open Nero at all. I do beleive at one point I updated to the 6.6.018 version...but am not convinced that this was the sole cause of the problem. I do think that there is some other software that is causing the problem...but am not sure what would have been installed at this time to cause the greif. I uninstalled Nero6 (did not use the cleantool though) and installed Nero7 and am having the same trouble. We recently reformatted the computer and have a fresh clean computer...so there shouldn't be too much crap on it. I do not know how to post a log to show you what my system holds. Could anyone help? Tx
Can anyone help? Here is a log of my last failure... usually I can't get the log because it just reboots my computer. On this one I was trying to burn an ISO to dvd Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 10:35:32 AM Nero Version: 6.6.0.13 Internal Version: 6, 6, 0, 13c (Nero Express) Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS0B - HA 1 TA 1 - 6.6.0.13 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <LITE-ON LTR-48246S >Version: SS0A - HA 1 TA 0 - 6.6.0.13 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD2500JB-00REA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITE-ON LTR-48246S D: CDRom0 LITE-ON DVDRW SOHW-1693S E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 117MB (120116kB) Memory in use : 77 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.1.2007 Burn DVD Image 11:04:14 PM #1 Text 0 File Burncd.cpp, Line 2882 LITE-ON DVDRW SOHW-1693S Buffer underrun protection activated 11:04:14 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 11:04:14 PM #3 Text 0 File Writer.cpp, Line 122 Writer LITE-ON DVDRW SOHW-1693S running 11:04:14 PM #4 Text 0 File Burncd.cpp, Line 3167 Turn on Disc-At-Once, using DVD media 11:04:14 PM #5 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2287536 (508:20.36, 4467MB) 11:04:14 PM #6 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 11:04:14 PM #7 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 11:04:14 PM #8 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:04:14 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2287537 (2287537) = #2287537/508:20.37 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2287537 blocks [LITE-ON DVDRW SOHW-1693S] -------------------------------------------------------------- 11:04:14 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4684875776, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2287537 | lead-out | 1 | 0x41 | 0x00 11:04:14 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 11:04:14 PM #12 Text 0 File Burncd.cpp, Line 4051 Cache writing successful. 11:04:14 PM #13 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 11:04:14 PM #14 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 16x (22,160 KB/s) 11:04:14 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 11:04:14 PM #16 Text 0 File DVDR.cpp, Line 2267 Recording mode: Sequential Recording Mode 11:04:14 PM #17 Text 0 File Mmc.cpp, Line 21469 Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON 11:04:14 PM #18 Text 0 File DVDR.cpp, Line 2421 Start write address at LBA 0 DVD high compatibility mode: Yes 11:04:14 PM #19 Text 0 File Cdrdrv.cpp, Line 8438 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:05:02 PM #20 Text 0 File Cdrdrv.cpp, Line 1288 23:05:02.937 - LITE-ON DVDRW SOHW-1693S\H1 T1 : Queue again later 11:07:33 PM #21 SCSI -1046 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x06C20000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x3A 0x20 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 11:07:33 PM #22 CDR -1046 File Writer.cpp, Line 311 Illegal disc 11:07:33 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:07:34 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 11:07:34 PM #25 Text 0 File DVDR.cpp, Line 2658 EndDAO: Last written address was 14879 11:07:34 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 16x (22,160 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 13/12/2006 1:52:41 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 03/10/2006 11:21:48 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 6:00:00 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Kim272, You have Roxio software and that conflicts with Nero. Please run Roxio Zap to remove it. http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml Also update your Nero to a more stable version here: http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe And you are burning too fast at 16x. Slow it down to 8x.
Hi... I knew that Roxio was a major conflict with Nero... I am not sure how it got on my computer... not even sure what it is. I actually am avoiding the Nero update because it conflicts with DVD shrink. What exactly happens when you burn a dvd too fast? I will try the Roxio zap and tell you how it goes... Tx
Awesome... everything is working like a charm... I never would have known that I had Roxio in there. Thank you so much