1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

TROUBLE BURNING w/ NERO

Discussion in 'DVDR' started by JJYkim, Apr 22, 2005.

  1. JJYkim

    JJYkim Member

    Joined:
    Nov 7, 2004
    Messages:
    84
    Likes Received:
    0
    Trophy Points:
    16
    This is the second time this has happened to me...in the midst of burning files onto the DVD disc, nero suddenly gives me a message saying that burn process has failed. I've already wated 3 DVD discs within two days because of this problem

    THere's nothing wrong with the software (at least I think) because I got it directly from the official nero site. WHy is it doing this? One minute it's burning perfectly, the next it gives me error messages. It seems like every other DVD I burn, the error message pops up.

    What could be wrong??
    Btw- I was copying a DVD disc when this happened. This is what the error message said:

    Jennifer Kim


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-10-26 ¿ÀÈÄ 5:35:34
    Nero Version: 6.6.0.8 (Nero Express)
    Recorder: <PIONEER DVD-RW DVR-K12D>Version: 1.10 - HA 1 TA 0 - 6.6.0.8
    Adapter driver: <atapi> HA 1
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <PIONEER DVD-RW DVR-K12D>Version: 1.10 - HA 1 TA 0 - 6.6.0.8
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : TOSHIBA MK8025GAS atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : PIONEER DVD-RW DVR-K12D atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    PIONEER DVD-RW DVR-K12D D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 510MB (523244kB)
    Free physical memory: 264MB (270652kB)
    Memory in use : 48 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    22.4.2005
    ===== Disc-Copy over image - 1st step : Copy to image ...

    ¿ÀÀü 8:35:52 #1 Text 0 File Reader.cpp, Line 127
    Reader running

    ¿ÀÀü 8:35:52 #2 Text 0 File Writer.cpp, Line 122
    Writer Image Recorder running

    ¿ÀÀü 8:35:52 #3 Text 0 File DVDCopy.cpp, Line 279
    DVD Track-Information from source disc
    S01 T01 Con 0x14 Start 0 Len 2267664 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

    ¿ÀÀü 8:35:53 #4 Text 0 File DVDCopy.cpp, Line 382
    Max -1 tracks of 1 allowed to copy
    1: 0 - 2267664 = 2267664, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

    ¿ÀÀü 8:35:53 #5 Text 0 File Burncd.cpp, Line 3153
    Turn on Disc-At-Once, using DVD media

    ¿ÀÀü 8:35:53 #6 Text 0 File DlgWaitCD.cpp, Line 259
    Last possible write address on media: 2621439 (582:32.39, 5119MB)
    Last address to be written: 2267663 (503:55.38, 4429MB)

    ¿ÀÀü 8:35:53 #7 Text 0 File DlgWaitCD.cpp, Line 271
    Write in overburning mode: NO (enabled: CD)

    ¿ÀÀü 8:35:53 #8 Text 0 File DlgWaitCD.cpp, Line 2316
    Recorder: Image Recorder;
    CD type reading failed
    ATIP Data: ?

    ¿ÀÀü 8:35:53 #9 Text 0 File DlgWaitCD.cpp, Line 433
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    ¿ÀÀü 8:35:53 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - Data (mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 2267664 (2267664) = #2267664/503:55.39
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2267664 blocks [Image Recorder]
    --------------------------------------------------------------

    ¿ÀÀü 8:35:53 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4644175872, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2267664 | lead-out | 1 | 0x41 | 0x00

    ¿ÀÀü 8:35:53 #12 Phase 120 File dlgbrnst.cpp, Line 1832
    Creating the image for burning

    ¿ÀÀü 8:35:53 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    ¿ÀÀü 8:54:06 #14 Text 0 File WriterStatus.cpp, Line 116
    < Image Recorder > start writing Lead-Out at LBA 2267664 (229A10h), lenght 0 blocks

    ¿ÀÀü 8:54:06 #15 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    ¿ÀÀü 8:54:07 #16 Phase 121 File dlgbrnst.cpp, Line 1832
    Creating Image completed successfully



    ===== Disc-Copy over image - 2nd step : Burn the image ...

    ¿ÀÀü 8:54:31 #1 Text 0 File Reader.cpp, Line 127
    Reader running

    ¿ÀÀü 8:54:31 #2 Text 0 File Writer.cpp, Line 122
    Writer PIONEER DVD-RW DVR-K12D running

    ¿ÀÀü 8:54:31 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
    Image was written as DAO.
    DAOI:
    MediaCatalogNumber = ''
    TocType = 0x40
    Finalized = 1
    First/Last Track = 1 / 1
    1: ISRC = ''
    Blocksize = 2048
    TrackMode = 'TRM_DATA_MODE1'
    TrackConfig = 0x00
    First/Last Index = 0 / 1
    Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4644175872
    CUES:
    0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
    1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
    2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
    3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=503:55.39 ( 2267664) RecDep=0x00
    MTYP: Mediumtype = DVD (old format) (0x1C)
    Image file name: <C:\Documents and Settings\Jennifer Kim\My Documents\TempImage.nrg>

    ¿ÀÀü 8:54:31 #4 Text 0 File Burncd.cpp, Line 3153
    Turn on Disc-At-Once, using DVD media

    ¿ÀÀü 9:00:37 #5 Text 0 File DlgWaitCD.cpp, Line 259
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2267663 (503:55.38, 4429MB)

    ¿ÀÀü 9:00:37 #6 Text 0 File DlgWaitCD.cpp, Line 271
    Write in overburning mode: NO (enabled: CD)

    ¿ÀÀü 9:00:37 #7 Text 0 File DlgWaitCD.cpp, Line 2316
    Recorder: PIONEER DVD-RW DVR-K12D, Media type: DVD+R
    Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 3

    ¿ÀÀü 9:00:37 #8 Text 0 File DlgWaitCD.cpp, Line 433
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

    ¿ÀÀü 9:00:37 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - DVD-ROM)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2267664 (2267664) = #2267664/503:55.39
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2267664 blocks [PIONEER DVD-RW DVR-K12D]
    --------------------------------------------------------------

    ¿ÀÀü 9:00:37 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [PIONEER DVD-RW DVR-K12D] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4644175872, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2267664 | lead-out | 1 | 0x41 | 0x00

    ¿ÀÀü 9:00:37 #11 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2.4x (3,324 KB/s)

    ¿ÀÀü 9:00:37 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    ¿ÀÀü 9:00:37 #13 Text 0 File Cdrdrv.cpp, Line 8430
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: CMC.MAG.
    Media type ID: E01
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8
    23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    ¿ÀÀü 9:00:37 #14 Text 0 File DVDPlusRW.cpp, Line 638
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    ¿ÀÀü 9:00:43 #15 Text 0 File Cdrdrv.cpp, Line 1287
    09:00:43.531 - PIONEER DVD-RW DVR-K12D\H1 T0 : Queue again later

    ¿ÀÀü 9:03:36 #16 Text 0 File Cdrdrv.cpp, Line 1287
    09:03:36.156 - PIONEER DVD-RW DVR-K12D\H1 T0 : Queue again later

    ¿ÀÀü 9:06:05 #17 Text 0 File Cdrdrv.cpp, Line 1287
    09:06:05.703 - PIONEER DVD-RW DVR-K12D\H1 T0 : Queue again later

    ¿ÀÀü 9:06:08 #18 Text 0 File Cdrdrv.cpp, Line 1287
    09:06:08.703 - PIONEER DVD-RW DVR-K12D\H1 T0 : Queue again later

    ¿ÀÀü 9:06:12 #19 Text 0 File Cdrdrv.cpp, Line 1287
    09:06:12.968 - PIONEER DVD-RW DVR-K12D\H1 T0 : Queue again later

    ¿ÀÀü 9:06:13 #20 Text 0 File Cdrdrv.cpp, Line 1287
    09:06:13.140 - PIONEER DVD-RW DVR-K12D\H1 T0 : Queue again later

    ¿ÀÀü 9:06:23 #21 Text 0 File Cdrdrv.cpp, Line 1287
    09:06:23.156 - PIONEER DVD-RW DVR-K12D\H1 T0 : Queue again later

    ¿ÀÀü 9:20:38 #22 Text 0 File Cdrdrv.cpp, Line 1287
    09:20:38.812 - PIONEER DVD-RW DVR-K12D\H1 T0 : Queue again later

    ¿ÀÀü 9:20:54 #23 SCSI -1135 File Cdrdrv.cpp, Line 1435
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03760000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x1D 0xEB 0x20 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x1D 0xE8 0x80 0x0E
    0x00 0x00 0x00 0x00 0x0C 0x00

    ¿ÀÀü 9:20:54 #24 CDR -1135 File Writer.cpp, Line 311
    Write error

    ¿ÀÀü 9:20:54 #25 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    ¿ÀÀü 9:20:54 #26 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    ¿ÀÀü 9:20:58 #27 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2.4x (3,324 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.60a, size=17232 bytes, created 2003-08-27 ¿ÀÀü 6:02:00 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 2003-03-31 ¿ÀÀü 8:00:00 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    Last edited: Apr 22, 2005
  2. Car.Mike

    Car.Mike Active member

    Joined:
    Jan 24, 2004
    Messages:
    3,787
    Likes Received:
    1
    Trophy Points:
    66
    Delete your lic. # please
     
  3. Car.Mike

    Car.Mike Active member

    Joined:
    Jan 24, 2004
    Messages:
    3,787
    Likes Received:
    1
    Trophy Points:
    66
    Here is one of your problems:

    1.Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)

    Try using better blank media Like Verbatim

    2.You are also burning to close to the outer rim:

    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2267663 (503:55.38, 4429MB)

    Set the size in Nero to custom and make it 4300
     
    Last edited: Apr 22, 2005
  4. JJYkim

    JJYkim Member

    Joined:
    Nov 7, 2004
    Messages:
    84
    Likes Received:
    0
    Trophy Points:
    16
    What do you mean by burning too close?
    I'm a newbie..sorry for being ignorant. I did use a blank media. The brand I used was imation DVD + R....Could you explain in detail what the problem is? Thanks so much.

    btw- I have blank medias I bought on ebay...are those reliable or not? (they're not brand names)
     
    Last edited: Apr 22, 2005
  5. Car.Mike

    Car.Mike Active member

    Joined:
    Jan 24, 2004
    Messages:
    3,787
    Likes Received:
    1
    Trophy Points:
    66
    Burning to close is the DVD Burner is writing the DVD Data too close to the outer edge. The dye there is usually bad. That is why i suggested you lower the DVD compression size back to 4300mb

    You used the branded version Of Imation Blank DVD's but they were really made by CMC. CMC usually makes crappy media so you need to avoid those like the plague. The blank media you bought on Ebay and the Imation disk you have are just not suitable for doing DVD Movies. The preferred brand around here is Verbatim, Taiyo Yuden or Riteks (G05's) If you purchase them from a reputable dealer like Newegg, Rima, MediaSuperstore then you should get the better blank media

    In Nero using Recode 2 on the main screen on the lower right hand side is a box that says FIT TO TARGET. Make sure a check mark is in the box and below that change the number to 4300MB

    If you have any more questions please post back.
     
  6. JJYkim

    JJYkim Member

    Joined:
    Nov 7, 2004
    Messages:
    84
    Likes Received:
    0
    Trophy Points:
    16
    Thanks so much. So this should prevent future error messages.

    I'm surprised that imation isn't good quality. So I should stick with the brands you mentioned?
    I'll try burning tonight after adjusting the settings. Thanks.

    If I have anymore troubles/issues, I'll post again. Thaks so much.

    P.S Could you visit this link and tell me which ones are good? I'm working within a budget so nothing too too pricey...

    http://www2.newegg.com/Product/Prod...tegory=10&minPrice=&maxPrice=&Go.x=28&Go.y=29
     
    Last edited: Apr 22, 2005
  7. Car.Mike

    Car.Mike Active member

    Joined:
    Jan 24, 2004
    Messages:
    3,787
    Likes Received:
    1
    Trophy Points:
    66
  8. Car.Mike

    Car.Mike Active member

    Joined:
    Jan 24, 2004
    Messages:
    3,787
    Likes Received:
    1
    Trophy Points:
    66
  9. zebra16

    zebra16 Member

    Joined:
    Apr 22, 2005
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    I have been having very similar issues - where burning is taking (at least from what the on-screen clock suggests) as much as 4 hours to burn 2 Gbz onto a DVD+R. Also, NERO has, on the first three attempts, given me a message that it failed.

    I have attempted to work with the tech staff for NERO, who suggested downloading a current version, as well as addressing the firmware for the DVD drive. I have done both, but still see incredibly slow burn times.

    Any ideas?
     
  10. Car.Mike

    Car.Mike Active member

    Joined:
    Jan 24, 2004
    Messages:
    3,787
    Likes Received:
    1
    Trophy Points:
    66
    zebra16,
    Your problems are probably caused by the burner going into PIO Mode instead of staying in DMA Mode. Go into device manager and looK for IDE/ATA controllers and then click on that. Go to the sec. IDE controllers and right click itand go to properities and click that and then go to advanced settings and see if the controllers are in DMA mode. If not change them to DMA.
    Windows starts off the controllers in DMA and for every conflict brings the setting down 1 notch.
    You might also google for a free registry cleaner and let the registry cleaner clean any possible conflicts you might have in the registry
     
  11. JJYkim

    JJYkim Member

    Joined:
    Nov 7, 2004
    Messages:
    84
    Likes Received:
    0
    Trophy Points:
    16
    hey..I just checked but the DVD disc I used was memorex not imation..so why did it say imation on the error log??? Isn't memorex supposed to be good? WHy did it malfunction? Is it because of burning too close to the rim?? Sorry for all the questions..I'm just really curious.
     
  12. BTFSB

    BTFSB Member

    Joined:
    Mar 26, 2005
    Messages:
    74
    Likes Received:
    0
    Trophy Points:
    16
    Download the latest updates for Nero and then back off your burn speed to half what you are using. Better yet use DVDFab Express with DVDIdle Pro available at www.dvdidle.com. Nero is too inconsistent for wwriting at this time since it keeps going through a perpetual upgrade process.
     
  13. Car.Mike

    Car.Mike Active member

    Joined:
    Jan 24, 2004
    Messages:
    3,787
    Likes Received:
    1
    Trophy Points:
    66
    JJYkim,
    Memorex is close to the bottom of the barrel and some members can burn w/ them but most find out they are junk. They are good for data and Pictures but not for compressed Movies. Just try and get the Verbatim if you can. Yes burning too close to the outer rim will cause problems because that is where the dye is the thinness
     
  14. JJYkim

    JJYkim Member

    Joined:
    Nov 7, 2004
    Messages:
    84
    Likes Received:
    0
    Trophy Points:
    16
    is the dvdidles software free or must I purchase a serial code for it?? IS this a good reliable software compared to Nero?
     
    Last edited: Apr 24, 2005
  15. arniebear

    arniebear Active member

    Joined:
    Jan 2, 2005
    Messages:
    8,638
    Likes Received:
    0
    Trophy Points:
    96
    Just what is it you are trying to burn, if it is a movie, are you already using DVD Decrypter and DVD Shrink programs? If you are then set DVD Shrink to burn with Decrypter instead of Nero, and see if this works.
     
  16. JJYkim

    JJYkim Member

    Joined:
    Nov 7, 2004
    Messages:
    84
    Likes Received:
    0
    Trophy Points:
    16
    right now, I'm using nero to burn avi files to the dvd disc.
    I did try burning this series that's on dvd using nero, and it worked...but the rest didn't.

    If a dvd doesn't have a block that prevents people from ripping it, is it possible to use nero to rip and copy the dvd? For instance, I was burning this korean tv series that's on a dvd, and it didn't seem to have a block...or should I always just use the decrypt softwares you mentioned?
     
  17. arniebear

    arniebear Active member

    Joined:
    Jan 2, 2005
    Messages:
    8,638
    Likes Received:
    0
    Trophy Points:
    96
    Last edited: Apr 24, 2005
  18. JJYkim

    JJYkim Member

    Joined:
    Nov 7, 2004
    Messages:
    84
    Likes Received:
    0
    Trophy Points:
    16
    I have another question..it's slightly off topic but not entirely. So the data I burnt onto the cheap discs...are they safe or should I burn them onto another dvd? In other words..they work perfectly fine now, but would they stop working in the future?

    More specifically, these are avi files..they're tv episodes that I dled. Would it be safe to copy these files onto my hardrive from the cheap dvds and then burn them onto a new disc or should I re-download these files?
     
    Last edited: Apr 24, 2005
  19. JJYkim

    JJYkim Member

    Joined:
    Nov 7, 2004
    Messages:
    84
    Likes Received:
    0
    Trophy Points:
    16
    any response?? *Bump*
     
  20. JJYkim

    JJYkim Member

    Joined:
    Nov 7, 2004
    Messages:
    84
    Likes Received:
    0
    Trophy Points:
    16
    It happened again. This time I was using verbatim media, the top of the line!! And still the burn process failed. AHHH I'm going to waste all my discs.
    T_T Please someone help me..Why the heck is nero giving me so much problems???


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-10-26 ¿ÀÈÄ 6:35:34
    Nero Version: 6.6.0.12
    Internal Version: 6, 6, 0, 12c
    (Nero Express)
    Recorder: <PIONEER DVD-RW DVR-K12D>Version: 1.10 - HA 1 TA 0 - 6.6.0.12
    Adapter driver: <atapi> HA 1
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <PIONEER DVD-RW DVR-K12D>Version: 1.10 - HA 1 TA 0 - 6.6.0.12
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : TOSHIBA MK8025GAS atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : PIONEER DVD-RW DVR-K12D atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    PIONEER DVD-RW DVR-K12D D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 510MB (523244kB)
    Free physical memory: 110MB (112816kB)
    Memory in use : 78 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    28.4.2005
    ISO compilation
    ¿ÀÈÄ 6:53:19 #1 Text 0 File Isodoc.cpp, Line 6194
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    ¿ÀÈÄ 6:53:21 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    ¿ÀÈÄ 6:53:21 #3 Text 0 File Writer.cpp, Line 122
    Writer PIONEER DVD-RW DVR-K12D running

    ¿ÀÈÄ 6:53:21 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    ¿ÀÈÄ 6:53:21 #5 Text 0 File Burncd.cpp, Line 3153
    Turn on Disc-At-Once, using DVD media

    ¿ÀÈÄ 6:53:22 #6 Text 0 File DlgWaitCD.cpp, Line 260
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2152095 (478:14.45, 4203MB)

    ¿ÀÈÄ 6:53:22 #7 Text 0 File DlgWaitCD.cpp, Line 272
    Write in overburning mode: NO (enabled: CD)

    ¿ÀÈÄ 6:53:22 #8 Text 0 File DlgWaitCD.cpp, Line 2339
    Recorder: PIONEER DVD-RW DVR-K12D, Media type: DVD-R
    Disc Manufacturer: MCC 02 - RG20
    Disc Application Code: 64, Disc Physical Code: 193

    ¿ÀÈÄ 6:53:22 #9 Text 0 File DlgWaitCD.cpp, Line 438
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    ¿ÀÈÄ 6:53:22 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2152096 (2152096) = #2152096/478:14.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2152096 blocks [PIONEER DVD-RW DVR-K12D]
    --------------------------------------------------------------

    ¿ÀÈÄ 6:53:24 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [PIONEER DVD-RW DVR-K12D] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4407492608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2152096 | lead-out | 1 | 0x41 | 0x00

    ¿ÀÈÄ 6:53:25 #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    ¿ÀÈÄ 6:53:26 #13 Text 0 File Burncd.cpp, Line 4037
    Cache writing successful.

    ¿ÀÈÄ 6:53:26 #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    ¿ÀÈÄ 6:53:26 #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2x (2,770 KB/s)

    ¿ÀÈÄ 6:53:26 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    ¿ÀÈÄ 6:53:26 #17 Text 0 File DVDR.cpp, Line 2258
    Recording mode: Sequential Recording Mode

    ¿ÀÈÄ 6:53:26 #18 Text 0 File Mmc.cpp, Line 21356
    Set BUFE: Buffer underrun protection -> ON

    ¿ÀÈÄ 6:53:26 #19 Text 0 File DVDR.cpp, Line 2412
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    ¿ÀÈÄ 6:53:26 #20 Text 0 File Cdrdrv.cpp, Line 8438
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    ¿ÀÈÄ 6:54:09 #21 Text 0 File Cdrdrv.cpp, Line 1288
    18:54:09.640 - PIONEER DVD-RW DVR-K12D\H1 T0 : Queue again later

    ¿ÀÈÄ 6:56:16 #22 SCSI -1064 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B8D0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x21
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0xD4 0x60 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x21 0x02

    ¿ÀÈÄ 6:56:16 #23 CDR -1064 File Writer.cpp, Line 311
    Invalid block address

    ¿ÀÈÄ 6:56:16 #24 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    ¿ÀÈÄ 6:56:17 #25 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    ¿ÀÈÄ 6:56:17 #26 Text 0 File DVDR.cpp, Line 2649
    EndDAO: Last written address was 54367

    ¿ÀÈÄ 6:56:17 #27 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.60a, size=17232 bytes, created 2003-08-27 ¿ÀÀü 6:02:00 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 2003-03-31 ¿ÀÀü 8:00:00 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     

Share This Page