i'm trying to make a backup copy of a movie. i compressed the file using dvdshrink, ripped it on to the hard drive, but when i try to transfer it from the hard drive to a blank dvd-r with dvd decrypter, a message reading "Device Not Ready (medium not present)" appears at the bottom corner of the window. i have tried a few different blank discs, but the message is always the same. i have read all the guides and can't figure it out.
You may wish toi try my guide also - http://www.dvdplusvideo.com/petesguide3.html For other guides, see my sig Pete
i tried scuba pete's directions (which were excellent) exactly as they were written, and i'm still getting the "Device Not Ready (Medium Not Present)" message. do you think there's something wrong with my machine or with the dvd-r's?
i followed scuba pete's guide (which was excellent) exactly as it was written, and i'm still getting the same message, "Device Not Ready (Medium Not Present)." is there something wrong with my machine or the dvd-r's? any ideas?
Try "fine tuning' DVDD - follow these directions - recheck all the settinmgs for DVD Shrink also - http://www.dvdplusvideo.com/petesguide9.html Next make sure you are using decent media - Eliminating errors and going for the "Best burn" ~ Tips ~ When attempting to achieve the best burn, consider reducing that burn speed to the 4X area. Iffin you have a new 16X, DL burner, you'll probably do well at 6X. It is my feeling that 8X and over leads to occasional coasters, even when using top grade stuff such as Verbatim DataLife Plus media. The second part of the solution is to always use a decent grade media. I suggest something like those discs made by Taiyo Yuden, Ritek, Mitsubishi or RICOH. Unfortunately they are also the discs most plagued by pirate Mfgrs. and for that reason I like dealing with Mertline OR Newegg who have a great return policy on their products. I have had great luck with RiData and Verbatim DataLife Plus discs and their prices are extremely reasonable. In today's market, now more than any other time, beware of pirated fakes. DVD-R market plagued by fake media and inconsistent quality fake Taiyo Yuden media, and discuss the current quality of RITEK products. Is the quality of Verbatim affected by the fact that they are now outsourcing production to CMC, and Moser Bayer? http://www.cd-rw.org/articles/archive/dvd-r_media_report.cfm The DVD recordable media market: What's up with RITEK? What a convenient timing - few days after we publish articles about the quality issues on the DVD recordable media market, RiDisc promises to start delivering premium quality. They use strong words in describing their new RiDisc Xtreme products - "Grade AAA+ RITEK G05" and "zero tolerance quality control". http://cd-rw.org/articles/archive/ritek_dvd-r_quality.cfm DVD-R market plagued by fake media and inconsistent quality http://www.afterdawn.com/news/archive/6090.cfm DVD Video media quality notes; Memorex is an excellent example as DVD media goes, 90% of Memorex, made by CMC, is sub-standard as far as DVD backups are concerned, figures as high as 50% coasters have been reported (One member bought a stack of 50 and got 23 good burns.), not what I would call an impressive record. Memorex made a name for itself with their magnetic tapes (VHS and audio cassettes) and have been living off it ever since. There are 4 different companies that manufacture Memorex DVD's BTW and product quality varies widely as you might imagine. Only 10% of the Memorex out there, those are discs manufactured by Mitsubishi in the 25 pack spindle , and they're the exception – they are the good ones. It's easy to see now why the quality of a big-named company can’t be trusted - “ Who’s making your Memorex tonight ?” Is it just Memorex ? No ! I just used Memorex as an example, Princo, Orange Pack, Great AZO and most "store" discs aren’t all that suitable as a DVD backup media – that’s why we are specific in the type of media we are recommending. 1. * Cheap media freezes, skips, pixelats and may refuse to be recognized by both burners and players :-( Besides "Freezing", "skips" many times you’ll get a “Cyclic Redundancy error” or an "I/O error". This message can mean that your discs are scratched or dirty, it can also mean that your burner won’t accept your “cheap” media :-( Another problem which, “Pops up” is a “*Power Calibration Error”. This can stop you right in your tracks and most often is caused by, Yep, you guessed it, inexpensive media. *A “Power Calibration Error” can also be attributed to the Optical Components of a DVD Writer, though this isn’t usually the case. Orange Pack, Princo, Great AZO and 90% of Memorex plus many others are just not that good for DVD burning. Those same discs however, are quite good for your MP3 music, picture archives, Spread sheets and Data..Even DataSafe G04’s made by Ritek have been reported as an inferior quality media and are evoking that “Oh no, I shouldn’t have gotten those.” What we are suggesting is to download this DVD Identifier to find out who manufactured your DVD and if it's a decent quality. http://dvd.identifier.cdfreaks.com/ Once you have your disc identified, click the "More information" icon and see what information you're given. if you're not sure of the quality, come on back and we'll check it out for you - 2. A good grade, Hi-quality media is needed for DVD reproduction ! RiData, Phillips, Sony, "Branded" Ritek G04's or "Branded" Verbatim Data Life, Verbatim DataLife plus, Taiyo Yuden's and generally, almost any discs manufactured by Mitsubishi or RICOH are excellent bets. Among the better discs we're looking for, any media boasting "Advanced Metal AZO" - BUT it must say "METAL" AZO !, this indicates a superior dye and dye application on a good composite disc, while they are sometimes a bit "pricey" they are just the type of media we're looking for to do our DVD backups, Prices online from Meritline.com OR Newegg.com have gotten Ritek G04 starting at about a $ .45 (USD) a disc – For DVD backups, purchasing inexpensive media or even average media is a gamble, some people win BUT the majority lose, they lose varying amounts true but, they still lose :-( Using good grade media can guarantee you one thing to an absolute certainty; it surely cannot hurt. In an effort to clear the air, when I speak of "Cheap" or "Inexpensive" media, I'm not referring to the price you pay at the counter - I'm referring to poor quality control used during manufacturing and the quality of the dye, dye application or composite type used. I'm not saying it won't burn - Some may burn, some may not. It's quality is inconsistent, meaning it's not dependable. To make matters worse, many times the discs that you do burn may play in your PC BUT your standalone player may not accept them – what good then is a backup DVD that cannot be watched on a DVD player ? When I say "Branded," that means that when you pick up a disc in your hand, it says "Ritek" or "RiData" on the disc itself. The monetary cost of the media we recommend many times is cheaper than what you are purchasing now. We like to verify our information prior to recommending things. There are certain things we look at. For instance, when their dye and dye application are listed as unknown, this almost guarantees us they are using whatever they can get at a cheap price. Companies that use quality materials like to BRAG about it, naming names and staying with quality manufacturers who produce their media. Using DVD identifier and MediaMatch can help you find out a lot about what you're using. Purchasing your DVD media online can insure that you're getting quality merchandise at a good price. Shopping wisely will save you time, aggravation and money. Cheers, Pete
good to see u 'pete! is it just me or has your presence been rather scarce here lately? or maybe i've just been looking in the wrong places .
Howdy ishbulb, Had a bit "O" difficulty with my rehab lately been in some other forums BUT should be around a bit more :0)
