I am unable to burn any dvd on tdk external dvd writer. I get illegal disc, unable to perform disc at once operation. I am using Nero version 6.3.1.18 Can any body please help me out with it. I have upgraded the firmware to the latest version 1.0C, and DMA mode is ON. My USB is version 2.0 TDK writer model number is 440N I dont know what i am missing here. Following are the log details: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.18 (Nero Express) Recorder: <TDK DVDRW0404N> Version: 1.0C - HA 2 TA 0 - 6.3.1.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8163 F: CDRom0 SAMSUNG CD-R/RW SW-252F G: CDRom1 TDK DVDRW0404N H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 254MB (260592kB) Free physical memory: 81MB (83460kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.1.2007 ISO compilation 8:46:46 AM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 8:46:46 AM #2 Text 0 File Reader.cpp, Line 118 Reader running 8:46:46 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 8:46:46 AM #4 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 8:46:47 AM #5 Text 0 File DlgWaitCD.cpp, Line 246 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2258015 (501:46.65, 4410MB) 8:46:47 AM #6 Text 0 File DlgWaitCD.cpp, Line 258 Write in overburning mode: NO (enabled: CD DVD) 8:46:47 AM #7 Text 0 File DlgWaitCD.cpp, Line 2143 Recorder: TDK DVDRW0404N, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 8:46:47 AM #8 Text 0 File DlgWaitCD.cpp, Line 419 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:46:47 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2258016 (2258016) = #2258016/501:46.66 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2258016 blocks [TDK DVDRW0404N ] -------------------------------------------------------------- 8:46:47 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4624416768, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2258016 | lead-out | 1 | 0x00 | 0x41 8:46:47 AM #11 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 8:46:47 AM #12 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 8:46:47 AM #13 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 8:46:47 AM #14 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 1x (1,385 KB/s) 8:46:48 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:46:48 AM #16 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 55:45,522 (3345522ms) -> OK 8:46:48 AM #17 Text 0 File DVDR.cpp, Line 1921 Recording mode: Sequential Recording Mode 8:46:48 AM #18 Text 0 File Mmc.cpp, Line 20453 Set BUFE: supported -> ON 8:46:48 AM #19 Text 0 File DVDR.cpp, Line 2062 Start write address at LBA 0 DVD high compatibility mode: Yes 8:46:48 AM #20 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version
This does not look like the entire log. Seems to be missing the bottom part that would contain the error messages. If you have Nero 7 then post the entire last log from that. Nero 7 logs should be here: C:\Program Files\Nero\Nero 7\Core\NeroHistory.log Sometimes newer Nero 7 versions (like mine) are saved in: C:\Documents and Settings\USERNAME\Application Data\Ahead\Nero Burning ROM About all I can see from this log is that you are running 256 MB of RAM which shouldn't be a problem, it will make your rip times a lot longer though.
I have completely removed roxio, but the problem still persists. Also, i was burning at 1x speed, just to make sure that the burn operation does not fail. Since i am unable to burn at all, i dont want to take any chances. Below are the complete logs by nero 7. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.18 (Nero Express) Recorder: <SONY DVD RW DW-Q28A> Version: KYS1 - HA 1 TA 0 - 6.3.1.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder CD-ROM: <SONY DVD RW DW-Q28A >Version: KYS1 - HA 1 TA 0 - 6.3.1.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DW-Q28A atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === SONY DVD RW DW-Q28A F: CDRom0 HL-DT-ST DVD-ROM GDR8163 G: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 254MB (260592kB) Free physical memory: 91MB (93596kB) Memory in use : 64 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.10.2006 UDF/ISO compilation 6:51:47 PM #1 Phase 112 File dlgbrnst.cpp, Line 1845 DVD-Video files reallocation started 6:51:47 PM #2 Phase 114 File dlgbrnst.cpp, Line 1845 DVD-Video files reallocation completed (no file modified) 6:51:47 PM #3 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 6:51:47 PM #4 Phase 111 File dlgbrnst.cpp, Line 1845 DVD-Video files sorted 6:51:47 PM #5 Text 0 File Reader.cpp, Line 118 Reader running 6:51:47 PM #6 Text 0 File Writer.cpp, Line 124 Writer SONY DVD RW DW-Q28A running 6:51:47 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 6:51:47 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 6:51:47 PM #9 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 6:51:47 PM #10 Text 0 File DlgWaitCD.cpp, Line 246 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2199439 (488:45.64, 4295MB) 6:51:47 PM #11 Text 0 File DlgWaitCD.cpp, Line 258 Write in overburning mode: NO (enabled: CD) 6:51:47 PM #12 Text 0 File DlgWaitCD.cpp, Line 2143 Recorder: SONY DVD RW DW-Q28A, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 6:51:47 PM #13 Text 0 File DlgWaitCD.cpp, Line 419 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:51:47 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2199440 (2199440) = #2199440/488:45.65 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2199440 blocks [SONY DVD RW DW-Q28A ] -------------------------------------------------------------- 6:51:47 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [SONY DVD RW DW-Q28A ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4504453120, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2199440 | lead-out | 1 | 0x00 | 0x41 6:51:47 PM #16 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 6:51:48 PM #17 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 6:51:48 PM #18 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 6:51:48 PM #19 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 8x (11,080 KB/s) 6:51:48 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:51:48 PM #21 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 6:51,992 (411992ms) -> OK 6:51:48 PM #22 Text 0 File DVDR.cpp, Line 1921 Recording mode: Sequential Recording Mode 6:51:48 PM #23 Text 0 File Mmc.cpp, Line 20453 Set BUFE: Power-Burn -> ON , Generic write control : ON 6:51:48 PM #24 Text 0 File DVDR.cpp, Line 2062 Start write address at LBA 0 DVD high compatibility mode: Yes 6:51:48 PM #25 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 6:52:45 PM #26 Text 0 File Cdrdrv.cpp, Line 1294 18:52:45.046 - SONY DVD RW DW-Q28A\H1 T0 : Queue again later 6:54:39 PM #27 SCSI -1024 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x081F0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x08 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x05 0xD5 0x60 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x08 0x03 6:54:39 PM #28 CDR -1024 File Writer.cpp, Line 304 Communication failure 6:54:39 PM #29 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 6:54:39 PM #30 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 6:54:39 PM #31 Text 0 File DVDR.cpp, Line 2304 EndDAO: Last written address was 382303 6:55:14 PM #32 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 6:55:14 PM #33 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 6:55:14 PM #34 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Ashish 1A20-020E-0000-1349-1210-6697* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.18 (Nero Express) Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.3.1.18 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === SAMSUNG CD-R/RW SW-252F G: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 254MB (260592kB) Free physical memory: 173MB (177488kB) Memory in use : 31 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.10.2006 CD Copy 8:27:55 AM #1 Text 0 File Reader.cpp, Line 118 Reader running 8:27:55 AM #2 Phase 48 File dlgbrnst.cpp, Line 1845 Analyzing disc 8:27:55 AM #3 Text 0 File Writer.cpp, Line 124 Writer Image Recorder running 8:27:57 AM #4 CDCOPY -1 File CDCopy.cpp, Line 1896 The CD is copyrighted 8:28:04 AM #5 Text 0 File CDCopy.cpp, Line 2116 _Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_ Track 1: 0 0 ( 0:02.00) 296659 296658 ( 65:57.33) 8:28:04 AM #6 Text 0 File CDCopy.cpp, Line 840 Copy options: copy on-the-fly: ON read ISRC/MCN: OFF use jitter correction: OFF data options ignore read error: ON write defekt blocks OFF read raw data: OFF read r-w subchannel data: OFF audio options ignore read error: ON read indexes: OFF read r-w subchannel data: OFF source disc does not look like CD Extra 01. 0 - 296659 = 296659, data (TRM_DATA_MODE1, block size 2048) 8:28:04 AM #7 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using CD-R/RW media 8:28:05 AM #8 Text 0 File DlgWaitCD.cpp, Line 246 Last possible write address on media: 2147483646 (477218:37.21) Last address to be written: 296658 ( 65:57.33) 8:28:05 AM #9 Text 0 File DlgWaitCD.cpp, Line 258 Write in overburning mode: NO (enabled: CD) 8:28:05 AM #10 Text 0 File DlgWaitCD.cpp, Line 2143 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 8:28:05 AM #11 Text 0 File DlgWaitCD.cpp, Line 419 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:28:05 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 296659 (296659) = #296659/65:55.34 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 296659 blocks [ Image Recorder ] -------------------------------------------------------------- 8:28:26 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 607864832, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 296659 | lead-out | 1 | 0x00 | 0x41 8:28:26 AM #14 Phase 65 File dlgbrnst.cpp, Line 1845 Burn process started 8:28:26 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0 8:31:04 AM #16 Text 0 File WriterStatus.cpp, Line 115 < Image Recorder > start writing Lead-Out at LBA 296659 (486D3h), lenght 0 blocks 8:31:06 AM #17 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 8:31:07 AM #18 Phase 66 File dlgbrnst.cpp, Line 1845 Burn process completed successfully Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Ashish 1A20-020E-0000-1349-1210-6697* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.18 (Nero Express) Recorder: <TDK DVDRW0404N> Version: 1.08 - HA 2 TA 0 - 6.3.1.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === SAMSUNG CD-R/RW SW-252F G: CDRom0 TDK DVDRW0404N F: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 254MB (260592kB) Free physical memory: 86MB (88480kB) Memory in use : 66 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 27.10.2006 UDF/ISO compilation 9:25:39 AM #1 Phase 112 File dlgbrnst.cpp, Line 1845 DVD-Video files reallocation started 9:25:39 AM #2 Phase 114 File dlgbrnst.cpp, Line 1845 DVD-Video files reallocation completed (no file modified) 9:25:39 AM #3 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 9:25:39 AM #4 Phase 111 File dlgbrnst.cpp, Line 1845 DVD-Video files sorted 9:25:39 AM #5 Text 0 File Reader.cpp, Line 118 Reader running 9:25:39 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 9:25:40 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 9:25:40 AM #8 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 9:25:40 AM #9 Text 0 File DlgWaitCD.cpp, Line 246 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2199439 (488:45.64, 4295MB) 9:25:40 AM #10 Text 0 File DlgWaitCD.cpp, Line 258 Write in overburning mode: NO (enabled: CD DVD) 9:25:40 AM #11 Text 0 File DlgWaitCD.cpp, Line 2143 Recorder: TDK DVDRW0404N, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 9:25:40 AM #12 Text 0 File DlgWaitCD.cpp, Line 419 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:25:40 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2199440 (2199440) = #2199440/488:45.65 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2199440 blocks [TDK DVDRW0404N ] -------------------------------------------------------------- 9:25:40 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4504453120, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2199440 | lead-out | 1 | 0x00 | 0x41 9:25:41 AM #15 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 9:25:41 AM #16 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 9:25:41 AM #17 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 9:25:41 AM #18 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 2.4x (3,324 KB/s) 9:25:41 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:25:41 AM #20 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 22:41,640 (1361640ms) -> OK 9:25:41 AM #21 Text 0 File DVDR.cpp, Line 1921 Recording mode: Sequential Recording Mode 9:25:41 AM #22 Text 0 File Mmc.cpp, Line 20453 Set BUFE: supported -> ON 9:25:41 AM #23 Text 0 File DVDR.cpp, Line 2062 Start write address at LBA 0 DVD high compatibility mode: Yes 9:25:41 AM #24 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 9:25:41 AM #25 SCSI -1046 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0x8F 0x90 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 9:25:41 AM #26 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614 Illegal disc 9:25:41 AM #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614 Could not perform start of Disc-at-once 9:25:41 AM #28 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 9:25:41 AM #29 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Ashish 1A20-020E-0000-1349-1210-6697* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.18 (Nero Express) Recorder: <TDK DVDRW0404N> Version: 1.08 - HA 2 TA 0 - 6.3.1.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === SAMSUNG CD-R/RW SW-252F G: CDRom0 TDK DVDRW0404N F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 254MB (260592kB) Free physical memory: 57MB (58860kB) Memory in use : 77 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 27.10.2006 UDF/ISO compilation 2:39:23 PM #1 Phase 112 File dlgbrnst.cpp, Line 1845 DVD-Video files reallocation started 2:39:23 PM #2 Phase 114 File dlgbrnst.cpp, Line 1845 DVD-Video files reallocation completed (no file modified) 2:39:23 PM #3 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 2:39:23 PM #4 Phase 111 File dlgbrnst.cpp, Line 1845 DVD-Video files sorted 2:39:23 PM #5 Text 0 File Reader.cpp, Line 118 Reader running 2:39:23 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 2:39:23 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 2:39:23 PM #8 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 2:39:24 PM #9 Text 0 File DlgWaitCD.cpp, Line 246 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2199439 (488:45.64, 4295MB) 2:39:24 PM #10 Text 0 File DlgWaitCD.cpp, Line 258 Write in overburning mode: NO (enabled: CD DVD) 2:39:24 PM #11 Text 0 File DlgWaitCD.cpp, Line 2143 Recorder: TDK DVDRW0404N, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 2:39:24 PM #12 Text 0 File DlgWaitCD.cpp, Line 419 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:39:24 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2199440 (2199440) = #2199440/488:45.65 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2199440 blocks [TDK DVDRW0404N ] -------------------------------------------------------------- 2:39:24 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4504453120, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2199440 | lead-out | 1 | 0x00 | 0x41 2:39:24 PM #15 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 2:39:24 PM #16 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 2:39:24 PM #17 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 2:39:24 PM #18 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 2.4x (3,324 KB/s) 2:39:24 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:39:25 PM #20 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 22:41,640 (1361640ms) -> OK 2:39:25 PM #21 Text 0 File DVDR.cpp, Line 1921 Recording mode: Sequential Recording Mode 2:39:25 PM #22 Text 0 File Mmc.cpp, Line 20453 Set BUFE: supported -> ON 2:39:25 PM #23 Text 0 File DVDR.cpp, Line 2062 Start write address at LBA 0 DVD high compatibility mode: Yes 2:39:25 PM #24 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 2:39:25 PM #25 SCSI -1046 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0x8F 0x90 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 2:39:25 PM #26 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614 Illegal disc 2:39:25 PM #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614 Could not perform start of Disc-at-once 2:39:25 PM #28 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 2:39:25 PM #29 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=6.1.0.88 , size=24698 bytes, created 5/22/2003 12:20:36 AM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Ashish 1A20-020E-0000-1349-1210-6697* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.18 (Nero Express) Recorder: <TDK DVDRW0404N> Version: 1.08 - HA 2 TA 0 - 6.3.1.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === SAMSUNG CD-R/RW SW-252F G: CDRom0 TDK DVDRW0404N F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 254MB (260592kB) Free physical memory: 82MB (84008kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 27.10.2006 UDF/ISO compilation 8:05:57 PM #1 Phase 112 File dlgbrnst.cpp, Line 1845 DVD-Video files reallocation started 8:05:57 PM #2 Phase 114 File dlgbrnst.cpp, Line 1845 DVD-Video files reallocation completed (no file modified) 8:05:57 PM #3 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 8:05:57 PM #4 Phase 111 File dlgbrnst.cpp, Line 1845 DVD-Video files sorted 8:05:57 PM #5 Text 0 File Reader.cpp, Line 118 Reader running 8:05:57 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 8:05:57 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 8:05:57 PM #8 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 8:05:57 PM #9 Text 0 File DlgWaitCD.cpp, Line 246 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2199439 (488:45.64, 4295MB) 8:05:57 PM #10 Text 0 File DlgWaitCD.cpp, Line 258 Write in overburning mode: NO (enabled: CD DVD) 8:05:57 PM #11 Text 0 File DlgWaitCD.cpp, Line 2143 Recorder: TDK DVDRW0404N, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 8:05:57 PM #12 Text 0 File DlgWaitCD.cpp, Line 419 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:05:57 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2199440 (2199440) = #2199440/488:45.65 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2199440 blocks [TDK DVDRW0404N ] -------------------------------------------------------------- 8:05:57 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4504453120, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2199440 | lead-out | 1 | 0x00 | 0x41 8:05:58 PM #15 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 8:05:58 PM #16 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 8:05:58 PM #17 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 8:05:58 PM #18 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 2.4x (3,324 KB/s) 8:05:58 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:05:58 PM #20 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 22:41,640 (1361640ms) -> OK 8:05:58 PM #21 Text 0 File DVDR.cpp, Line 1921 Recording mode: Sequential Recording Mode 8:05:58 PM #22 Text 0 File Mmc.cpp, Line 20453 Set BUFE: supported -> ON 8:05:58 PM #23 Text 0 File DVDR.cpp, Line 2062 Start write address at LBA 0 DVD high compatibility mode: Yes 8:05:58 PM #24 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:05:58 PM #25 SCSI -1046 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0x8F 0x90 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 8:05:58 PM #26 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614 Illegal disc 8:05:58 PM #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614 Could not perform start of Disc-at-once 8:05:58 PM #28 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 8:05:58 PM #29 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=6.1.0.88 , size=24698 bytes, created 5/22/2003 12:20:36 AM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Ashish 1A20-020E-0000-1349-1210-6697* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.18 (Nero Express) Recorder: <SAMSUNG CD-R/RW SW-252F> Version: R806 - HA 1 TA 1 - 6.3.1.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8163 F: CDRom0 SAMSUNG CD-R/RW SW-252F G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 254MB (260592kB) Free physical memory: 75MB (76972kB) Memory in use : 70 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.12.2006 CD-ROM (ISO) 10:49:36 PM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Continue multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:49:36 PM #2 Phase 88 File dlgbrnst.cpp, Line 1845 ExacLink activated 10:49:36 PM #3 Text 0 File Reader.cpp, Line 118 Reader running 10:49:36 PM #4 Text 0 File Writer.cpp, Line 124 Writer SAMSUNG CD-R/RW SW-252F running 10:49:36 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 10:49:36 PM #6 Text 0 File Burncd.cpp, Line 3172 Turn on Track-at-once, using CD-R/RW media 10:49:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 246 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 185469 ( 41:14.69) 10:49:38 PM #8 Text 0 File DlgWaitCD.cpp, Line 258 Write in overburning mode: NO (enabled: CD DVD) 10:49:38 PM #9 Text 0 File DlgWaitCD.cpp, Line 2143 Recorder: SAMSUNG CD-R/RW SW-252F; CDR code: 00 97 24 16; OSJ entry from: SONY Corporation ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 18 10 (LI 97:24.16), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 10:49:38 PM #10 Text 0 File DlgWaitCD.cpp, Line 419 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:49:38 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 135460 (135460) = #135460/30:6.10 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 135458 blocks [SAMSUNG CD-R/RW SW-252F ] -------------------------------------------------------------- 10:49:38 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [SAMSUNG CD-R/RW SW-252F ] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 2 to 2: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 277729280, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 49860 | lead-in | 0 | 0x00 | 0x41 49860 | 2 | 0 | 0x00 | 0x41 50010 | 2 | 1 | 0x00 | 0x41 185470 | lead-out | 1 | 0x00 | 0x41 10:49:38 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030 Removed 2 run-out blocks from end of track 2. Length: 135460 -> 135458. 10:49:39 PM #14 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 10:49:39 PM #15 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 10:49:39 PM #16 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 10:49:39 PM #17 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 24x (3,600 KB/s) 10:49:39 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #50010 10:49:39 PM #19 Text 0 File Mmc.cpp, Line 20453 Set BUFE: ExacLink -> ON 10:51:07 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 10:51:13 PM #21 Text 0 File Mmc.cpp, Line 15278 <SAMSUNG CD-R/RW SW-252F > start Close Session 10:51:19 PM #22 Phase 37 File dlgbrnst.cpp, Line 1845 Burn process completed successfully at 24x (3,600 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/25/2006 9:17:00 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/25/2006 9:17:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Ashish 1A20-020E-0000-1349-1210-6697* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.18 (Nero Express) Recorder: <TDK DVDRW0404N> Version: 1.08 - HA 2 TA 0 - 6.3.1.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8163 F: CDRom0 SAMSUNG CD-R/RW SW-252F G: CDRom1 TDK DVDRW0404N H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 254MB (260592kB) Free physical memory: 94MB (97160kB) Memory in use : 62 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.1.2007 ISO compilation 11:36:43 PM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 11:36:43 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 11:36:43 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 11:36:43 PM #4 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 11:36:44 PM #5 Text 0 File DlgWaitCD.cpp, Line 246 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2258015 (501:46.65, 4410MB) 11:36:44 PM #6 Text 0 File DlgWaitCD.cpp, Line 258 Write in overburning mode: NO (enabled: CD DVD) 11:36:44 PM #7 Text 0 File DlgWaitCD.cpp, Line 2143 Recorder: TDK DVDRW0404N, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 11:36:44 PM #8 Text 0 File DlgWaitCD.cpp, Line 419 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:36:44 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2258016 (2258016) = #2258016/501:46.66 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2258016 blocks [TDK DVDRW0404N ] -------------------------------------------------------------- 11:36:44 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4624416768, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2258016 | lead-out | 1 | 0x00 | 0x41 11:36:44 PM #11 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 11:36:45 PM #12 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 11:36:45 PM #13 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 11:36:45 PM #14 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 1x (1,385 KB/s) 11:36:45 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:36:45 PM #16 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 55:45,522 (3345522ms) -> OK 11:36:45 PM #17 Text 0 File DVDR.cpp, Line 1921 Recording mode: Sequential Recording Mode 11:36:45 PM #18 Text 0 File Mmc.cpp, Line 20453 Set BUFE: supported -> ON 11:36:45 PM #19 Text 0 File DVDR.cpp, Line 2062 Start write address at LBA 0 DVD high compatibility mode: Yes 11:36:45 PM #20 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:36:45 PM #21 SCSI -1046 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0x74 0x60 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 11:36:45 PM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614 Illegal disc 11:36:45 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614 Could not perform start of Disc-at-once 11:36:45 PM #24 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 11:36:45 PM #25 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 1x (1,385 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/25/2006 9:17:00 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/25/2006 9:17:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Ashish 1A20-020E-0000-1349-1210-6697* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.18 (Nero Express) Recorder: <TDK DVDRW0404N> Version: 1.08 - HA 2 TA 0 - 6.3.1.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8163 F: CDRom0 SAMSUNG CD-R/RW SW-252F G: CDRom1 TDK DVDRW0404N H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 254MB (260592kB) Free physical memory: 94MB (96492kB) Memory in use : 62 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.1.2007 ISO compilation 11:39:13 PM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 11:39:13 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 11:39:13 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 11:39:13 PM #4 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 11:39:14 PM #5 Text 0 File DlgWaitCD.cpp, Line 246 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2258015 (501:46.65, 4410MB) 11:39:14 PM #6 Text 0 File DlgWaitCD.cpp, Line 258 Write in overburning mode: NO (enabled: CD DVD) 11:39:14 PM #7 Text 0 File DlgWaitCD.cpp, Line 2143 Recorder: TDK DVDRW0404N, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 11:39:14 PM #8 Text 0 File DlgWaitCD.cpp, Line 419 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:39:14 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2258016 (2258016) = #2258016/501:46.66 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2258016 blocks [TDK DVDRW0404N ] -------------------------------------------------------------- 11:39:14 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4624416768, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2258016 | lead-out | 1 | 0x00 | 0x41 11:39:14 PM #11 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 11:39:14 PM #12 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 11:39:14 PM #13 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 11:39:14 PM #14 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 1x (1,385 KB/s) 11:39:14 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:39:14 PM #16 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 55:45,522 (3345522ms) -> OK 11:39:14 PM #17 Text 0 File DVDR.cpp, Line 1921 Recording mode: Sequential Recording Mode 11:39:14 PM #18 Text 0 File Mmc.cpp, Line 20453 Set BUFE: supported -> ON 11:39:14 PM #19 Text 0 File DVDR.cpp, Line 2062 Start write address at LBA 0 DVD high compatibility mode: Yes 11:39:14 PM #20 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:39:14 PM #21 SCSI -1046 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0x74 0x60 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 11:39:14 PM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614 Illegal disc 11:39:14 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614 Could not perform start of Disc-at-once 11:39:14 PM #24 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 11:39:14 PM #25 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 1x (1,385 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/25/2006 9:17:00 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/25/2006 9:17:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Ashish 1A20-020E-0000-1349-1210-6697* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.18 (Nero Express) Recorder: <TDK DVDRW0404N> Version: 1.0C - HA 2 TA 0 - 6.3.1.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8163 F: CDRom0 SAMSUNG CD-R/RW SW-252F G: CDRom1 TDK DVDRW0404N H: CDRom4 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 254MB (260592kB) Free physical memory: 20MB (20612kB) Memory in use : 92 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.1.2007 ISO compilation 11:48:47 PM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 11:48:47 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 11:48:47 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 11:48:47 PM #4 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 11:48:47 PM #5 Text 0 File DlgWaitCD.cpp, Line 246 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2258015 (501:46.65, 4410MB) 11:48:47 PM #6 Text 0 File DlgWaitCD.cpp, Line 258 Write in overburning mode: NO (enabled: CD DVD) 11:48:48 PM #7 Text 0 File DlgWaitCD.cpp, Line 2143 Recorder: TDK DVDRW0404N, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 11:48:48 PM #8 Text 0 File DlgWaitCD.cpp, Line 419 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:48:48 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2258016 (2258016) = #2258016/501:46.66 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2258016 blocks [TDK DVDRW0404N ] -------------------------------------------------------------- 11:48:48 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4624416768, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2258016 | lead-out | 1 | 0x00 | 0x41 11:48:49 PM #11 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 11:48:50 PM #12 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 11:48:50 PM #13 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 11:48:50 PM #14 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 1x (1,385 KB/s) 11:48:50 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:48:50 PM #16 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 55:45,522 (3345522ms) -> OK 11:48:50 PM #17 Text 0 File DVDR.cpp, Line 1921 Recording mode: Sequential Recording Mode 11:48:50 PM #18 Text 0 File Mmc.cpp, Line 20453 Set BUFE: supported -> ON 11:48:50 PM #19 Text 0 File DVDR.cpp, Line 2062 Start write address at LBA 0 DVD high compatibility mode: Yes 11:48:50 PM #20 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:48:50 PM #21 SCSI -1046 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0x74 0x60 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 11:48:50 PM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614 Illegal disc 11:48:50 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614 Could not perform start of Disc-at-once 11:48:50 PM #24 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 11:48:51 PM #25 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 1x (1,385 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/25/2006 9:17:00 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/25/2006 9:17:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Ashish 1A20-020E-0000-1349-1210-6697* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.18 (Nero Express) Recorder: <TDK DVDRW0404N> Version: 1.0C - HA 2 TA 0 - 6.3.1.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8163 F: CDRom0 SAMSUNG CD-R/RW SW-252F G: CDRom1 TDK DVDRW0404N H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 254MB (260592kB) Free physical memory: 86MB (88132kB) Memory in use : 66 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.1.2007 ISO compilation 8:46:46 AM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 8:46:46 AM #2 Text 0 File Reader.cpp, Line 118 Reader running 8:46:46 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 8:46:46 AM #4 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 8:46:47 AM #5 Text 0 File DlgWaitCD.cpp, Line 246 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2258015 (501:46.65, 4410MB) 8:46:47 AM #6 Text 0 File DlgWaitCD.cpp, Line 258 Write in overburning mode: NO (enabled: CD DVD) 8:46:47 AM #7 Text 0 File DlgWaitCD.cpp, Line 2143 Recorder: TDK DVDRW0404N, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 8:46:47 AM #8 Text 0 File DlgWaitCD.cpp, Line 419 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:46:47 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2258016 (2258016) = #2258016/501:46.66 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2258016 blocks [TDK DVDRW0404N ] -------------------------------------------------------------- 8:46:47 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4624416768, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2258016 | lead-out | 1 | 0x00 | 0x41 8:46:47 AM #11 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 8:46:47 AM #12 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 8:46:47 AM #13 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 8:46:47 AM #14 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 1x (1,385 KB/s) 8:46:48 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:46:48 AM #16 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 55:45,522 (3345522ms) -> OK 8:46:48 AM #17 Text 0 File DVDR.cpp, Line 1921 Recording mode: Sequential Recording Mode 8:46:48 AM #18 Text 0 File Mmc.cpp, Line 20453 Set BUFE: supported -> ON 8:46:48 AM #19 Text 0 File DVDR.cpp, Line 2062 Start write address at LBA 0 DVD high compatibility mode: Yes 8:46:48 AM #20 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:46:48 AM #21 SCSI -1046 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0x74 0x60 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 8:46:48 AM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614 Illegal disc 8:46:48 AM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614 Could not perform start of Disc-at-once 8:46:48 AM #24 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 8:46:48 AM #25 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 1x (1,385 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/25/2006 9:17:00 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/25/2006 9:17:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
I didn't count how many logs you posted, but you have your Nero serial number at the beginning of each one. You should edit all of them out. They start with 1A20.... You are getting these "Check Condition" SCSI errors: That is telling me there is a problem with the connections going to the drive or there is something wrong with the drive itself or it may be a problem with the blank media you are using. It looks like you are using TDK media which is supposed to be OK unless you have the fake ones. Try some different media. Verbatim, Taiyo Yuden, Hitachi Maxell are 1st class. As far as your USB cable goes, just make sure you are plugged into a USB 2.0 port and not a 1.1 or lower. Check your computer's specs to find out. Any newer computer will be 2.0. You may have some other problem with the USB port. I notice from your logs that you have a CD burner installed iinternally: You really should pull it out, remove the TDK from it's external case and put it in where the CD burner was. It is always better to have the burner and DVD ROM installed internally, attached to the IDE buss. And if you do open your PC, consider installing another stick of RAM in there to bring it up to 512 MB. But try some different media first.
