1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

unable to burn any dvd on tdk external dvd writer

Discussion in 'DVDR' started by dugar158, Jan 12, 2007.

  1. dugar158

    dugar158 Guest

    I am unable to burn any dvd on tdk external dvd writer.
    I get illegal disc, unable to perform disc at once operation.

    I am using Nero version 6.3.1.18
    Can any body please help me out with it.
    I have upgraded the firmware to the latest version 1.0C, and DMA mode is ON. My USB is version 2.0

    TDK writer model number is 440N

    I dont know what i am missing here.
    i also did go through many of the previous posts but i am still stuck with it.

    Following are the log details:


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
    Nero version: 6.3.1.18 (Nero Express)
    Recorder: <TDK DVDRW0404N> Version: 1.0C - HA 2 TA 0 - 6.3.1.18
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8163 F: CDRom0
    SAMSUNG CD-R/RW SW-252F G: CDRom1
    TDK DVDRW0404N H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (260592kB)
    Free physical memory: 81MB (83460kB)
    Memory in use : 67 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    12.1.2007
    ISO compilation
    8:46:46 AM #1 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    8:46:46 AM #2 Text 0 File Reader.cpp, Line 118
    Reader running

    8:46:46 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    8:46:46 AM #4 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    8:46:47 AM #5 Text 0 File DlgWaitCD.cpp, Line 246
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2258015 (501:46.65, 4410MB)

    8:46:47 AM #6 Text 0 File DlgWaitCD.cpp, Line 258
    Write in overburning mode: NO (enabled: CD DVD)

    8:46:47 AM #7 Text 0 File DlgWaitCD.cpp, Line 2143
    Recorder: TDK DVDRW0404N, Media type: DVD-R
    Disc Manufacturer: TTH02 -
    Disc Application Code: 64, Disc Physical Code: 193

    8:46:47 AM #8 Text 0 File DlgWaitCD.cpp, Line 419
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    8:46:47 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2258016 (2258016) = #2258016/501:46.66
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2258016 blocks [TDK DVDRW0404N ]
    --------------------------------------------------------------

    8:46:47 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4624416768, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2258016 | lead-out | 1 | 0x00 | 0x41

    8:46:47 AM #11 Phase 24 File dlgbrnst.cpp, Line 1845
    Caching of files started

    8:46:47 AM #12 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    8:46:47 AM #13 Phase 25 File dlgbrnst.cpp, Line 1845
    Caching of files completed

    8:46:47 AM #14 Phase 36 File dlgbrnst.cpp, Line 1845
    Burn process started at 1x (1,385 KB/s)

    8:46:48 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    8:46:48 AM #16 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 55:45,522 (3345522ms) -> OK

    8:46:48 AM #17 Text 0 File DVDR.cpp, Line 1921
    Recording mode: Sequential Recording Mode

    8:46:48 AM #18 Text 0 File Mmc.cpp, Line 20453
    Set BUFE: supported -> ON

    8:46:48 AM #19 Text 0 File DVDR.cpp, Line 2062
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    8:46:48 AM #20 Text 0 File Cdrdrv.cpp, Line 8128
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version


     
  2. MysticE

    MysticE Active member

    Joined:
    Nov 15, 2003
    Messages:
    2,787
    Likes Received:
    0
    Trophy Points:
    66
    Seems a bit odd, what burn speed have you chosen?
     
  3. dugar158

    dugar158 Guest

    i have chosen 1x burn speed

    just now, I have upgraded my nero to 7.5.9, but i am still facing the same problem.
     
  4. slmh1296

    slmh1296 Guest

    If you have roxio installed I would get rid of that nero clashes with roxio also i know roxio can be a hard one to remove do a google search and look for a roxio removal tool you maybe able to find one on roxio site. here found it for ya http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
    also make sure you are using good media verbatrim or Taiyo Yuden.hope this helps
     
    Last edited by a moderator: Jan 12, 2007
  5. MysticE

    MysticE Active member

    Joined:
    Nov 15, 2003
    Messages:
    2,787
    Likes Received:
    0
    Trophy Points:
    66
    Nobody burns at 1X, I don't even think that's an option these days, not with any burning apps or discs I've got.
     
  6. slmh1296

    slmh1296 Guest

    i also have this burner but it is internal version. I always burn at 4x with no problems remember the slower you burn the better the quality.
     
  7. MysticE

    MysticE Active member

    Joined:
    Nov 15, 2003
    Messages:
    2,787
    Likes Received:
    0
    Trophy Points:
    66
    I suppose you have something other than anecdotal evidence to back this up? And why aren't you burning at 2X then?
     
  8. slmh1296

    slmh1296 Guest

    MysticE you got me anecdotal evidence is about all i got. I had a problem with a nec burner at higher speeds and scuba pete advice me too slow it down so I did and it worked.
    I just carried that over to all my other burners not only that but from what I read that is what everbody advises. So I am a follower. Sometimes with high compression I do burn at 2x but the majority is 4x.
    What do you burn at and why? I am always up for some learning. Is my think old school? was that a problem with older burners?
     
  9. rbrock

    rbrock Regular member

    Joined:
    Jun 15, 2006
    Messages:
    1,226
    Likes Received:
    0
    Trophy Points:
    46
    I would not go lower than 4x and I would use Verbatim DVDR disc to make sure that speed and blanks where not part of the problem.If its a store bought movie its full of blocks. You cant copy it unless you clean it up with some programs.
     
  10. dugar158

    dugar158 Guest

    I have completely removed roxio, but the problem still persists.

    Also, i am burning at 1x speed, just to make sure that the burn operation does not fail. Since i am unable to burn at all, i dont want to take any chances.

    Below are the complete logs by nero 7.

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
    Nero version: 6.3.1.18 (Nero Express)
    Recorder: <SONY DVD RW DW-Q28A> Version: KYS1 - HA 1 TA 0 - 6.3.1.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 11
    Drive is autodetected - recorder class: DVD+R9 DL recorder
    CD-ROM: <SONY DVD RW DW-Q28A >Version: KYS1 - HA 1 TA 0 - 6.3.1.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SONY DVD RW DW-Q28A atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    SONY DVD RW DW-Q28A F: CDRom0
    HL-DT-ST DVD-ROM GDR8163 G: CDRom3
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (260592kB)
    Free physical memory: 91MB (93596kB)
    Memory in use : 64 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    24.10.2006
    UDF/ISO compilation
    6:51:47 PM #1 Phase 112 File dlgbrnst.cpp, Line 1845
    DVD-Video files reallocation started

    6:51:47 PM #2 Phase 114 File dlgbrnst.cpp, Line 1845
    DVD-Video files reallocation completed (no file modified)

    6:51:47 PM #3 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    6:51:47 PM #4 Phase 111 File dlgbrnst.cpp, Line 1845
    DVD-Video files sorted

    6:51:47 PM #5 Text 0 File Reader.cpp, Line 118
    Reader running

    6:51:47 PM #6 Text 0 File Writer.cpp, Line 124
    Writer SONY DVD RW DW-Q28A running

    6:51:47 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    6:51:47 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    6:51:47 PM #9 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    6:51:47 PM #10 Text 0 File DlgWaitCD.cpp, Line 246
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2199439 (488:45.64, 4295MB)

    6:51:47 PM #11 Text 0 File DlgWaitCD.cpp, Line 258
    Write in overburning mode: NO (enabled: CD)

    6:51:47 PM #12 Text 0 File DlgWaitCD.cpp, Line 2143
    Recorder: SONY DVD RW DW-Q28A, Media type: DVD-R
    Disc Manufacturer: TTH02 -
    Disc Application Code: 64, Disc Physical Code: 193

    6:51:47 PM #13 Text 0 File DlgWaitCD.cpp, Line 419
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    6:51:47 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2199440 (2199440) = #2199440/488:45.65
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2199440 blocks [SONY DVD RW DW-Q28A ]
    --------------------------------------------------------------

    6:51:47 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [SONY DVD RW DW-Q28A ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4504453120, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2199440 | lead-out | 1 | 0x00 | 0x41

    6:51:47 PM #16 Phase 24 File dlgbrnst.cpp, Line 1845
    Caching of files started

    6:51:48 PM #17 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    6:51:48 PM #18 Phase 25 File dlgbrnst.cpp, Line 1845
    Caching of files completed

    6:51:48 PM #19 Phase 36 File dlgbrnst.cpp, Line 1845
    Burn process started at 8x (11,080 KB/s)

    6:51:48 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    6:51:48 PM #21 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 6:51,992 (411992ms) -> OK

    6:51:48 PM #22 Text 0 File DVDR.cpp, Line 1921
    Recording mode: Sequential Recording Mode

    6:51:48 PM #23 Text 0 File Mmc.cpp, Line 20453
    Set BUFE: Power-Burn -> ON , Generic write control : ON

    6:51:48 PM #24 Text 0 File DVDR.cpp, Line 2062
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    6:51:48 PM #25 Text 0 File Cdrdrv.cpp, Line 8128
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    6:52:45 PM #26 Text 0 File Cdrdrv.cpp, Line 1294
    18:52:45.046 - SONY DVD RW DW-Q28A\H1 T0 : Queue again later

    6:54:39 PM #27 SCSI -1024 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x081F0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x08
    Sense Qual: 0x03
    CDB Data: 0x2A 0x00 0x00 0x05 0xD5 0x60 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x08 0x03

    6:54:39 PM #28 CDR -1024 File Writer.cpp, Line 304
    Communication failure

    6:54:39 PM #29 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    6:54:39 PM #30 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    6:54:39 PM #31 Text 0 File DVDR.cpp, Line 2304
    EndDAO: Last written address was 382303

    6:55:14 PM #32 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    6:55:14 PM #33 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    6:55:14 PM #34 Phase 38 File dlgbrnst.cpp, Line 1845
    Burn process failed at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
    Nero version: 6.3.1.18 (Nero Express)
    Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.3.1.18
    Adapter driver: <Virtual Device> HA -1
    Drive buffer :
    CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    SAMSUNG CD-R/RW SW-252F G: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (260592kB)
    Free physical memory: 173MB (177488kB)
    Memory in use : 31 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.10.2006
    CD Copy
    8:27:55 AM #1 Text 0 File Reader.cpp, Line 118
    Reader running

    8:27:55 AM #2 Phase 48 File dlgbrnst.cpp, Line 1845
    Analyzing disc

    8:27:55 AM #3 Text 0 File Writer.cpp, Line 124
    Writer Image Recorder running

    8:27:57 AM #4 CDCOPY -1 File CDCopy.cpp, Line 1896
    The CD is copyrighted

    8:28:04 AM #5 Text 0 File CDCopy.cpp, Line 2116
    _Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
    Track 1: 0 0 ( 0:02.00) 296659 296658 ( 65:57.33)

    8:28:04 AM #6 Text 0 File CDCopy.cpp, Line 840
    Copy options: copy on-the-fly: ON
    read ISRC/MCN: OFF
    use jitter correction: OFF
    data options
    ignore read error: ON write defekt blocks OFF
    read raw data: OFF read r-w subchannel data: OFF
    audio options
    ignore read error: ON
    read indexes: OFF read r-w subchannel data: OFF
    source disc does not look like CD Extra
    01. 0 - 296659 = 296659, data (TRM_DATA_MODE1, block size 2048)

    8:28:04 AM #7 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using CD-R/RW media

    8:28:05 AM #8 Text 0 File DlgWaitCD.cpp, Line 246
    Last possible write address on media: 2147483646 (477218:37.21)
    Last address to be written: 296658 ( 65:57.33)

    8:28:05 AM #9 Text 0 File DlgWaitCD.cpp, Line 258
    Write in overburning mode: NO (enabled: CD)

    8:28:05 AM #10 Text 0 File DlgWaitCD.cpp, Line 2143
    Recorder: Image Recorder;
    CD type reading failed
    ATIP Data: ?

    8:28:05 AM #11 Text 0 File DlgWaitCD.cpp, Line 419
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    8:28:05 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - Data (mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 296659 (296659) = #296659/65:55.34
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 296659 blocks [ Image Recorder ]
    --------------------------------------------------------------

    8:28:26 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 607864832, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    -150 | lead-in | 0 | 0x00 | 0x41
    -150 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    296659 | lead-out | 1 | 0x00 | 0x41

    8:28:26 AM #14 Phase 65 File dlgbrnst.cpp, Line 1845
    Burn process started

    8:28:26 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

    8:31:04 AM #16 Text 0 File WriterStatus.cpp, Line 115
    < Image Recorder > start writing Lead-Out at LBA 296659 (486D3h), lenght 0 blocks

    8:31:06 AM #17 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    8:31:07 AM #18 Phase 66 File dlgbrnst.cpp, Line 1845
    Burn process completed successfully


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
    Nero version: 6.3.1.18 (Nero Express)
    Recorder: <TDK DVDRW0404N> Version: 1.08 - HA 2 TA 0 - 6.3.1.18
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    SAMSUNG CD-R/RW SW-252F G: CDRom0
    TDK DVDRW0404N F: CDRom3
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (260592kB)
    Free physical memory: 86MB (88480kB)
    Memory in use : 66 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    27.10.2006
    UDF/ISO compilation
    9:25:39 AM #1 Phase 112 File dlgbrnst.cpp, Line 1845
    DVD-Video files reallocation started

    9:25:39 AM #2 Phase 114 File dlgbrnst.cpp, Line 1845
    DVD-Video files reallocation completed (no file modified)

    9:25:39 AM #3 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    9:25:39 AM #4 Phase 111 File dlgbrnst.cpp, Line 1845
    DVD-Video files sorted

    9:25:39 AM #5 Text 0 File Reader.cpp, Line 118
    Reader running

    9:25:39 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    9:25:40 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    9:25:40 AM #8 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    9:25:40 AM #9 Text 0 File DlgWaitCD.cpp, Line 246
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2199439 (488:45.64, 4295MB)

    9:25:40 AM #10 Text 0 File DlgWaitCD.cpp, Line 258
    Write in overburning mode: NO (enabled: CD DVD)

    9:25:40 AM #11 Text 0 File DlgWaitCD.cpp, Line 2143
    Recorder: TDK DVDRW0404N, Media type: DVD-R
    Disc Manufacturer: TTH02 -
    Disc Application Code: 64, Disc Physical Code: 193

    9:25:40 AM #12 Text 0 File DlgWaitCD.cpp, Line 419
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:25:40 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2199440 (2199440) = #2199440/488:45.65
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2199440 blocks [TDK DVDRW0404N ]
    --------------------------------------------------------------

    9:25:40 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4504453120, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2199440 | lead-out | 1 | 0x00 | 0x41

    9:25:41 AM #15 Phase 24 File dlgbrnst.cpp, Line 1845
    Caching of files started

    9:25:41 AM #16 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    9:25:41 AM #17 Phase 25 File dlgbrnst.cpp, Line 1845
    Caching of files completed

    9:25:41 AM #18 Phase 36 File dlgbrnst.cpp, Line 1845
    Burn process started at 2.4x (3,324 KB/s)

    9:25:41 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    9:25:41 AM #20 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 22:41,640 (1361640ms) -> OK

    9:25:41 AM #21 Text 0 File DVDR.cpp, Line 1921
    Recording mode: Sequential Recording Mode

    9:25:41 AM #22 Text 0 File Mmc.cpp, Line 20453
    Set BUFE: supported -> ON

    9:25:41 AM #23 Text 0 File DVDR.cpp, Line 2062
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:25:41 AM #24 Text 0 File Cdrdrv.cpp, Line 8128
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    9:25:41 AM #25 SCSI -1046 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0x8F 0x90 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    9:25:41 AM #26 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614
    Illegal disc

    9:25:41 AM #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614
    Could not perform start of Disc-at-once

    9:25:41 AM #28 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    9:25:41 AM #29 Phase 38 File dlgbrnst.cpp, Line 1845
    Burn process failed at 2.4x (3,324 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Ashish

    1A20-020E-0000-1349-1210-6697*

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
    Nero version: 6.3.1.18 (Nero Express)
    Recorder: <TDK DVDRW0404N> Version: 1.08 - HA 2 TA 0 - 6.3.1.18
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    SAMSUNG CD-R/RW SW-252F G: CDRom0
    TDK DVDRW0404N F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (260592kB)
    Free physical memory: 57MB (58860kB)
    Memory in use : 77 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    27.10.2006
    UDF/ISO compilation
    2:39:23 PM #1 Phase 112 File dlgbrnst.cpp, Line 1845
    DVD-Video files reallocation started

    2:39:23 PM #2 Phase 114 File dlgbrnst.cpp, Line 1845
    DVD-Video files reallocation completed (no file modified)

    2:39:23 PM #3 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    2:39:23 PM #4 Phase 111 File dlgbrnst.cpp, Line 1845
    DVD-Video files sorted

    2:39:23 PM #5 Text 0 File Reader.cpp, Line 118
    Reader running

    2:39:23 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    2:39:23 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    2:39:23 PM #8 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    2:39:24 PM #9 Text 0 File DlgWaitCD.cpp, Line 246
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2199439 (488:45.64, 4295MB)

    2:39:24 PM #10 Text 0 File DlgWaitCD.cpp, Line 258
    Write in overburning mode: NO (enabled: CD DVD)

    2:39:24 PM #11 Text 0 File DlgWaitCD.cpp, Line 2143
    Recorder: TDK DVDRW0404N, Media type: DVD-R
    Disc Manufacturer: TTH02 -
    Disc Application Code: 64, Disc Physical Code: 193

    2:39:24 PM #12 Text 0 File DlgWaitCD.cpp, Line 419
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    2:39:24 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2199440 (2199440) = #2199440/488:45.65
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2199440 blocks [TDK DVDRW0404N ]
    --------------------------------------------------------------

    2:39:24 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4504453120, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2199440 | lead-out | 1 | 0x00 | 0x41

    2:39:24 PM #15 Phase 24 File dlgbrnst.cpp, Line 1845
    Caching of files started

    2:39:24 PM #16 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    2:39:24 PM #17 Phase 25 File dlgbrnst.cpp, Line 1845
    Caching of files completed

    2:39:24 PM #18 Phase 36 File dlgbrnst.cpp, Line 1845
    Burn process started at 2.4x (3,324 KB/s)

    2:39:24 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    2:39:25 PM #20 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 22:41,640 (1361640ms) -> OK

    2:39:25 PM #21 Text 0 File DVDR.cpp, Line 1921
    Recording mode: Sequential Recording Mode

    2:39:25 PM #22 Text 0 File Mmc.cpp, Line 20453
    Set BUFE: supported -> ON

    2:39:25 PM #23 Text 0 File DVDR.cpp, Line 2062
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    2:39:25 PM #24 Text 0 File Cdrdrv.cpp, Line 8128
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    2:39:25 PM #25 SCSI -1046 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0x8F 0x90 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    2:39:25 PM #26 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614
    Illegal disc

    2:39:25 PM #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614
    Could not perform start of Disc-at-once

    2:39:25 PM #28 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    2:39:25 PM #29 Phase 38 File dlgbrnst.cpp, Line 1845
    Burn process failed at 2.4x (3,324 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=6.1.0.88 , size=24698 bytes, created 5/22/2003 12:20:36 AM
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Ashish

    1A20-020E-0000-1349-1210-6697*

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
    Nero version: 6.3.1.18 (Nero Express)
    Recorder: <TDK DVDRW0404N> Version: 1.08 - HA 2 TA 0 - 6.3.1.18
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    SAMSUNG CD-R/RW SW-252F G: CDRom0
    TDK DVDRW0404N F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (260592kB)
    Free physical memory: 82MB (84008kB)
    Memory in use : 67 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    27.10.2006
    UDF/ISO compilation
    8:05:57 PM #1 Phase 112 File dlgbrnst.cpp, Line 1845
    DVD-Video files reallocation started

    8:05:57 PM #2 Phase 114 File dlgbrnst.cpp, Line 1845
    DVD-Video files reallocation completed (no file modified)

    8:05:57 PM #3 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    8:05:57 PM #4 Phase 111 File dlgbrnst.cpp, Line 1845
    DVD-Video files sorted

    8:05:57 PM #5 Text 0 File Reader.cpp, Line 118
    Reader running

    8:05:57 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    8:05:57 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    8:05:57 PM #8 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    8:05:57 PM #9 Text 0 File DlgWaitCD.cpp, Line 246
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2199439 (488:45.64, 4295MB)

    8:05:57 PM #10 Text 0 File DlgWaitCD.cpp, Line 258
    Write in overburning mode: NO (enabled: CD DVD)

    8:05:57 PM #11 Text 0 File DlgWaitCD.cpp, Line 2143
    Recorder: TDK DVDRW0404N, Media type: DVD-R
    Disc Manufacturer: TTH02 -
    Disc Application Code: 64, Disc Physical Code: 193

    8:05:57 PM #12 Text 0 File DlgWaitCD.cpp, Line 419
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    8:05:57 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2199440 (2199440) = #2199440/488:45.65
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2199440 blocks [TDK DVDRW0404N ]
    --------------------------------------------------------------

    8:05:57 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4504453120, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2199440 | lead-out | 1 | 0x00 | 0x41

    8:05:58 PM #15 Phase 24 File dlgbrnst.cpp, Line 1845
    Caching of files started

    8:05:58 PM #16 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    8:05:58 PM #17 Phase 25 File dlgbrnst.cpp, Line 1845
    Caching of files completed

    8:05:58 PM #18 Phase 36 File dlgbrnst.cpp, Line 1845
    Burn process started at 2.4x (3,324 KB/s)

    8:05:58 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    8:05:58 PM #20 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 22:41,640 (1361640ms) -> OK

    8:05:58 PM #21 Text 0 File DVDR.cpp, Line 1921
    Recording mode: Sequential Recording Mode

    8:05:58 PM #22 Text 0 File Mmc.cpp, Line 20453
    Set BUFE: supported -> ON

    8:05:58 PM #23 Text 0 File DVDR.cpp, Line 2062
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    8:05:58 PM #24 Text 0 File Cdrdrv.cpp, Line 8128
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    8:05:58 PM #25 SCSI -1046 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0x8F 0x90 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    8:05:58 PM #26 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614
    Illegal disc

    8:05:58 PM #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614
    Could not perform start of Disc-at-once

    8:05:58 PM #28 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    8:05:58 PM #29 Phase 38 File dlgbrnst.cpp, Line 1845
    Burn process failed at 2.4x (3,324 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=6.1.0.88 , size=24698 bytes, created 5/22/2003 12:20:36 AM
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Ashish

    1A20-020E-0000-1349-1210-6697*

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
    Nero version: 6.3.1.18 (Nero Express)
    Recorder: <SAMSUNG CD-R/RW SW-252F> Version: R806 - HA 1 TA 1 - 6.3.1.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8163 F: CDRom0
    SAMSUNG CD-R/RW SW-252F G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (260592kB)
    Free physical memory: 75MB (76972kB)
    Memory in use : 70 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    11.12.2006
    CD-ROM (ISO)
    10:49:36 PM #1 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Continue multisession
    Burning mode : TAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    10:49:36 PM #2 Phase 88 File dlgbrnst.cpp, Line 1845
    ExacLink activated

    10:49:36 PM #3 Text 0 File Reader.cpp, Line 118
    Reader running

    10:49:36 PM #4 Text 0 File Writer.cpp, Line 124
    Writer SAMSUNG CD-R/RW SW-252F running

    10:49:36 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    10:49:36 PM #6 Text 0 File Burncd.cpp, Line 3172
    Turn on Track-at-once, using CD-R/RW media

    10:49:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 246
    Last possible write address on media: 359848 ( 79:59.73)
    Last address to be written: 185469 ( 41:14.69)

    10:49:38 PM #8 Text 0 File DlgWaitCD.cpp, Line 258
    Write in overburning mode: NO (enabled: CD DVD)

    10:49:38 PM #9 Text 0 File DlgWaitCD.cpp, Line 2143
    Recorder: SAMSUNG CD-R/RW SW-252F;
    CDR code: 00 97 24 16; OSJ entry from: SONY Corporation
    ATIP Data:
    Special Info [hex] 1: D0 00 A0, 2: 61 18 10 (LI 97:24.16), 3: 4F 3B 4A (LO 79:59.74)
    Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

    10:49:38 PM #10 Text 0 File DlgWaitCD.cpp, Line 419
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    10:49:38 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 135460 (135460) = #135460/30:6.10
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 135458 blocks [SAMSUNG CD-R/RW SW-252F ]
    --------------------------------------------------------------

    10:49:38 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [SAMSUNG CD-R/RW SW-252F ] for write in TAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 2 to 2:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 277729280, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    49860 | lead-in | 0 | 0x00 | 0x41
    49860 | 2 | 0 | 0x00 | 0x41
    50010 | 2 | 1 | 0x00 | 0x41
    185470 | lead-out | 1 | 0x00 | 0x41

    10:49:38 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
    Removed 2 run-out blocks from end of track 2. Length: 135460 -> 135458.

    10:49:39 PM #14 Phase 24 File dlgbrnst.cpp, Line 1845
    Caching of files started

    10:49:39 PM #15 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    10:49:39 PM #16 Phase 25 File dlgbrnst.cpp, Line 1845
    Caching of files completed

    10:49:39 PM #17 Phase 36 File dlgbrnst.cpp, Line 1845
    Burn process started at 24x (3,600 KB/s)

    10:49:39 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #50010

    10:49:39 PM #19 Text 0 File Mmc.cpp, Line 20453
    Set BUFE: ExacLink -> ON

    10:51:07 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    10:51:13 PM #21 Text 0 File Mmc.cpp, Line 15278
    <SAMSUNG CD-R/RW SW-252F > start Close Session

    10:51:19 PM #22 Phase 37 File dlgbrnst.cpp, Line 1845
    Burn process completed successfully at 24x (3,600 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/25/2006 9:17:00 AM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/25/2006 9:17:00 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Ashish

    1A20-020E-0000-1349-1210-6697*

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
    Nero version: 6.3.1.18 (Nero Express)
    Recorder: <TDK DVDRW0404N> Version: 1.08 - HA 2 TA 0 - 6.3.1.18
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8163 F: CDRom0
    SAMSUNG CD-R/RW SW-252F G: CDRom1
    TDK DVDRW0404N H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (260592kB)
    Free physical memory: 94MB (97160kB)
    Memory in use : 62 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    9.1.2007
    ISO compilation
    11:36:43 PM #1 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    11:36:43 PM #2 Text 0 File Reader.cpp, Line 118
    Reader running

    11:36:43 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    11:36:43 PM #4 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    11:36:44 PM #5 Text 0 File DlgWaitCD.cpp, Line 246
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2258015 (501:46.65, 4410MB)

    11:36:44 PM #6 Text 0 File DlgWaitCD.cpp, Line 258
    Write in overburning mode: NO (enabled: CD DVD)

    11:36:44 PM #7 Text 0 File DlgWaitCD.cpp, Line 2143
    Recorder: TDK DVDRW0404N, Media type: DVD-R
    Disc Manufacturer: TTH02 -
    Disc Application Code: 64, Disc Physical Code: 193

    11:36:44 PM #8 Text 0 File DlgWaitCD.cpp, Line 419
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    11:36:44 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2258016 (2258016) = #2258016/501:46.66
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2258016 blocks [TDK DVDRW0404N ]
    --------------------------------------------------------------

    11:36:44 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4624416768, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2258016 | lead-out | 1 | 0x00 | 0x41

    11:36:44 PM #11 Phase 24 File dlgbrnst.cpp, Line 1845
    Caching of files started

    11:36:45 PM #12 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    11:36:45 PM #13 Phase 25 File dlgbrnst.cpp, Line 1845
    Caching of files completed

    11:36:45 PM #14 Phase 36 File dlgbrnst.cpp, Line 1845
    Burn process started at 1x (1,385 KB/s)

    11:36:45 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    11:36:45 PM #16 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 55:45,522 (3345522ms) -> OK

    11:36:45 PM #17 Text 0 File DVDR.cpp, Line 1921
    Recording mode: Sequential Recording Mode

    11:36:45 PM #18 Text 0 File Mmc.cpp, Line 20453
    Set BUFE: supported -> ON

    11:36:45 PM #19 Text 0 File DVDR.cpp, Line 2062
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    11:36:45 PM #20 Text 0 File Cdrdrv.cpp, Line 8128
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:36:45 PM #21 SCSI -1046 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0x74 0x60 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    11:36:45 PM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614
    Illegal disc

    11:36:45 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614
    Could not perform start of Disc-at-once

    11:36:45 PM #24 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    11:36:45 PM #25 Phase 38 File dlgbrnst.cpp, Line 1845
    Burn process failed at 1x (1,385 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/25/2006 9:17:00 AM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/25/2006 9:17:00 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Ashish

    1A20-020E-0000-1349-1210-6697*

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
    Nero version: 6.3.1.18 (Nero Express)
    Recorder: <TDK DVDRW0404N> Version: 1.08 - HA 2 TA 0 - 6.3.1.18
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8163 F: CDRom0
    SAMSUNG CD-R/RW SW-252F G: CDRom1
    TDK DVDRW0404N H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (260592kB)
    Free physical memory: 94MB (96492kB)
    Memory in use : 62 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    9.1.2007
    ISO compilation
    11:39:13 PM #1 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    11:39:13 PM #2 Text 0 File Reader.cpp, Line 118
    Reader running

    11:39:13 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    11:39:13 PM #4 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    11:39:14 PM #5 Text 0 File DlgWaitCD.cpp, Line 246
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2258015 (501:46.65, 4410MB)

    11:39:14 PM #6 Text 0 File DlgWaitCD.cpp, Line 258
    Write in overburning mode: NO (enabled: CD DVD)

    11:39:14 PM #7 Text 0 File DlgWaitCD.cpp, Line 2143
    Recorder: TDK DVDRW0404N, Media type: DVD-R
    Disc Manufacturer: TTH02 -
    Disc Application Code: 64, Disc Physical Code: 193

    11:39:14 PM #8 Text 0 File DlgWaitCD.cpp, Line 419
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    11:39:14 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2258016 (2258016) = #2258016/501:46.66
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2258016 blocks [TDK DVDRW0404N ]
    --------------------------------------------------------------

    11:39:14 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4624416768, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2258016 | lead-out | 1 | 0x00 | 0x41

    11:39:14 PM #11 Phase 24 File dlgbrnst.cpp, Line 1845
    Caching of files started

    11:39:14 PM #12 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    11:39:14 PM #13 Phase 25 File dlgbrnst.cpp, Line 1845
    Caching of files completed

    11:39:14 PM #14 Phase 36 File dlgbrnst.cpp, Line 1845
    Burn process started at 1x (1,385 KB/s)

    11:39:14 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    11:39:14 PM #16 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 55:45,522 (3345522ms) -> OK

    11:39:14 PM #17 Text 0 File DVDR.cpp, Line 1921
    Recording mode: Sequential Recording Mode

    11:39:14 PM #18 Text 0 File Mmc.cpp, Line 20453
    Set BUFE: supported -> ON

    11:39:14 PM #19 Text 0 File DVDR.cpp, Line 2062
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    11:39:14 PM #20 Text 0 File Cdrdrv.cpp, Line 8128
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:39:14 PM #21 SCSI -1046 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0x74 0x60 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    11:39:14 PM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614
    Illegal disc

    11:39:14 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614
    Could not perform start of Disc-at-once

    11:39:14 PM #24 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    11:39:14 PM #25 Phase 38 File dlgbrnst.cpp, Line 1845
    Burn process failed at 1x (1,385 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/25/2006 9:17:00 AM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/25/2006 9:17:00 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Ashish

    1A20-020E-0000-1349-1210-6697*

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
    Nero version: 6.3.1.18 (Nero Express)
    Recorder: <TDK DVDRW0404N> Version: 1.0C - HA 2 TA 0 - 6.3.1.18
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8163 F: CDRom0
    SAMSUNG CD-R/RW SW-252F G: CDRom1
    TDK DVDRW0404N H: CDRom4
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (260592kB)
    Free physical memory: 20MB (20612kB)
    Memory in use : 92 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    9.1.2007
    ISO compilation
    11:48:47 PM #1 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    11:48:47 PM #2 Text 0 File Reader.cpp, Line 118
    Reader running

    11:48:47 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    11:48:47 PM #4 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    11:48:47 PM #5 Text 0 File DlgWaitCD.cpp, Line 246
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2258015 (501:46.65, 4410MB)

    11:48:47 PM #6 Text 0 File DlgWaitCD.cpp, Line 258
    Write in overburning mode: NO (enabled: CD DVD)

    11:48:48 PM #7 Text 0 File DlgWaitCD.cpp, Line 2143
    Recorder: TDK DVDRW0404N, Media type: DVD-R
    Disc Manufacturer: TTH02 -
    Disc Application Code: 64, Disc Physical Code: 193

    11:48:48 PM #8 Text 0 File DlgWaitCD.cpp, Line 419
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    11:48:48 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2258016 (2258016) = #2258016/501:46.66
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2258016 blocks [TDK DVDRW0404N ]
    --------------------------------------------------------------

    11:48:48 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4624416768, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2258016 | lead-out | 1 | 0x00 | 0x41

    11:48:49 PM #11 Phase 24 File dlgbrnst.cpp, Line 1845
    Caching of files started

    11:48:50 PM #12 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    11:48:50 PM #13 Phase 25 File dlgbrnst.cpp, Line 1845
    Caching of files completed

    11:48:50 PM #14 Phase 36 File dlgbrnst.cpp, Line 1845
    Burn process started at 1x (1,385 KB/s)

    11:48:50 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    11:48:50 PM #16 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 55:45,522 (3345522ms) -> OK

    11:48:50 PM #17 Text 0 File DVDR.cpp, Line 1921
    Recording mode: Sequential Recording Mode

    11:48:50 PM #18 Text 0 File Mmc.cpp, Line 20453
    Set BUFE: supported -> ON

    11:48:50 PM #19 Text 0 File DVDR.cpp, Line 2062
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    11:48:50 PM #20 Text 0 File Cdrdrv.cpp, Line 8128
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:48:50 PM #21 SCSI -1046 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0x74 0x60 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    11:48:50 PM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614
    Illegal disc

    11:48:50 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614
    Could not perform start of Disc-at-once

    11:48:50 PM #24 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    11:48:51 PM #25 Phase 38 File dlgbrnst.cpp, Line 1845
    Burn process failed at 1x (1,385 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/25/2006 9:17:00 AM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/25/2006 9:17:00 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Ashish

    1A20-020E-0000-1349-1210-6697*

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
    Nero version: 6.3.1.18 (Nero Express)
    Recorder: <TDK DVDRW0404N> Version: 1.0C - HA 2 TA 0 - 6.3.1.18
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8163 F: CDRom0
    SAMSUNG CD-R/RW SW-252F G: CDRom1
    TDK DVDRW0404N H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (260592kB)
    Free physical memory: 86MB (88132kB)
    Memory in use : 66 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    12.1.2007
    ISO compilation
    8:46:46 AM #1 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    8:46:46 AM #2 Text 0 File Reader.cpp, Line 118
    Reader running

    8:46:46 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    8:46:46 AM #4 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    8:46:47 AM #5 Text 0 File DlgWaitCD.cpp, Line 246
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2258015 (501:46.65, 4410MB)

    8:46:47 AM #6 Text 0 File DlgWaitCD.cpp, Line 258
    Write in overburning mode: NO (enabled: CD DVD)

    8:46:47 AM #7 Text 0 File DlgWaitCD.cpp, Line 2143
    Recorder: TDK DVDRW0404N, Media type: DVD-R
    Disc Manufacturer: TTH02 -
    Disc Application Code: 64, Disc Physical Code: 193

    8:46:47 AM #8 Text 0 File DlgWaitCD.cpp, Line 419
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    8:46:47 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2258016 (2258016) = #2258016/501:46.66
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2258016 blocks [TDK DVDRW0404N ]
    --------------------------------------------------------------

    8:46:47 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4624416768, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2258016 | lead-out | 1 | 0x00 | 0x41

    8:46:47 AM #11 Phase 24 File dlgbrnst.cpp, Line 1845
    Caching of files started

    8:46:47 AM #12 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    8:46:47 AM #13 Phase 25 File dlgbrnst.cpp, Line 1845
    Caching of files completed

    8:46:47 AM #14 Phase 36 File dlgbrnst.cpp, Line 1845
    Burn process started at 1x (1,385 KB/s)

    8:46:48 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    8:46:48 AM #16 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 55:45,522 (3345522ms) -> OK

    8:46:48 AM #17 Text 0 File DVDR.cpp, Line 1921
    Recording mode: Sequential Recording Mode

    8:46:48 AM #18 Text 0 File Mmc.cpp, Line 20453
    Set BUFE: supported -> ON

    8:46:48 AM #19 Text 0 File DVDR.cpp, Line 2062
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    8:46:48 AM #20 Text 0 File Cdrdrv.cpp, Line 8128
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    8:46:48 AM #21 SCSI -1046 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0x74 0x60 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    8:46:48 AM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614
    Illegal disc

    8:46:48 AM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614
    Could not perform start of Disc-at-once

    8:46:48 AM #24 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    8:46:48 AM #25 Phase 38 File dlgbrnst.cpp, Line 1845
    Burn process failed at 1x (1,385 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/25/2006 9:17:00 AM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/25/2006 9:17:00 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
     
    Last edited by a moderator: Jan 12, 2007
  11. slmh1296

    slmh1296 Guest

    dugar158 I see in your nero log you left your serial key sign in your post. Click on the edit tab and remove the key it starts with 1A20.
    What is your step by step process from when you put in the disk you want to backup. list all software involved in your backup process.
    I saw in the nero log you are using tuff disc or at least they are manufacturer of the disc you are using I would buy some better media try verbatrim or sony ot ty's
     
    Last edited by a moderator: Jan 13, 2007
  12. dugar158

    dugar158 Guest

    thanks a lot for you help..

    i will try using a different media and let you know the results..
     
    Last edited by a moderator: Jan 12, 2007
  13. rbrock

    rbrock Regular member

    Joined:
    Jun 15, 2006
    Messages:
    1,226
    Likes Received:
    0
    Trophy Points:
    46
    You have Nero 6 I would upgrade it to 6.6.0.18 here is the link http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe
    you may need to run the Roxio Clean tool to make sure you removed it all I have a TDK 880 N it dose not burn faster than 8x When you burn at 1x that to slow and will not work are you burning a movie ? If so it may to big to fit a 4.7 gig Single Layer disc. Use DVD Shrink and DVD Drcrypter and you can burn with Decrypter and set the speed or it will burn with Nero .Can you burn anything like Music or Pictures ?
     
  14. slmh1296

    slmh1296 Guest

    make sure you use the roxio removal tool I left the link in my previous post roxio was designed it seems to not ever be fully uninstalled. To test it is a possiable media problem I forgot nero has a simulated burn option try using that and see what happens.
     
  15. MysticE

    MysticE Active member

    Joined:
    Nov 15, 2003
    Messages:
    2,787
    Likes Received:
    0
    Trophy Points:
    66
    I just like to stir the pot now and then [​IMG]
    To me that would indicate a bad media to burner match if you can't burn at the rated speed it means the write stategy (in the firmware) is not optimized (or might not even exist with new media and older burners, hence the burner is guessing), one size does not fit all when it comes to media. Yes, slowing the burn usually enables one to burn discs like this. But if you start with media that can be burned correctly at it's rated speed (a good write stategy for that disc) and then choose to burn at a slower speed doesn't it stand to reason that this approach would be more ideal?
     
  16. rbrock

    rbrock Regular member

    Joined:
    Jun 15, 2006
    Messages:
    1,226
    Likes Received:
    0
    Trophy Points:
    46
    I would like to know what he/she is burning What brand DVD blanks being used and can they burn anything,is the Firmware up to date . This would HELP alot.
     
  17. garmoon

    garmoon Regular member

    Joined:
    Oct 7, 2004
    Messages:
    4,841
    Likes Received:
    0
    Trophy Points:
    46
    Just a note to all. My first burner was the internal TDK 440N. The 4X burner was retired a year ago. It made many burns @4X with XcopyXpress until it finally couldn't do the encryptions. The burner worked fine with decrypter and Shrink, ALL with Roxio still installed. The culprit is InCD from Nero not Roxio. I use Nero 6.6 Ultra to do most of my back ups and Roxio is still also working. Is your firmware up to date?
     
  18. rbrock

    rbrock Regular member

    Joined:
    Jun 15, 2006
    Messages:
    1,226
    Likes Received:
    0
    Trophy Points:
    46
    Thanks garmoon for that info, 440n is only a 4x burner maybe that is the problem its not reading the disc they are trying to use ( cheap 16x ? ) If they would post what blanks they are using and Upadte the firmware they might get going agin or start burning in the first place
     

Share This Page