Hey i recently bought some new verbatim dvd-r and was tryin to burn scarface to the disk but it wasn't happening. i looked on the forums bout scarface and saw some peeps were having problems backing it up so i tryed few different progs ie. vobblanker,dvd decrypter and offcourse dvd shrink. but no matter what it keeps spittin my my disc out. So were there a bad batch of verbatim shipped?? i usually use fuji but thought i would give verbatim a try since i heard alot of good things.. Keeps tellin me its an illegal disk and gives me this..1A20-xxxx-xxxx-xxxx-xxxx-xxxx* Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 7:01:02 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM Nero API version: 6.3.1.20 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 1 TA 0 - 6.3.1.20 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder === Scsi-Device-Map === DiskPeripheral : MAXTOR 4K040H2 atapi Port 0 ID 0 DMA: On CdRomPeripheral : Memorex DVD+/-DLRWL1 F16 atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY CD-RW CRX195E1 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === Memorex DVD+/-DLRWL1 F16 D: CDRom0 SONY CD-RW CRX195E1 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048052kB) Free physical memory: 666MB (682168kB) Memory in use : 34 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.3.2005
Please edit out your nero serial #,just above your error report. Starts out as 1A20 xxxx xxxx xxxx xxxx xxxx By your partial report,sounds like your burner's firmware will not handle those verbs. Which verbatim -r are you using,digital movie quality,data life,or the data-life plus? Updating your firmware may take care of this.
Im not exactly sure on the quality it just says dvd-r dvd recordable. the dvd identifier code gave it mcc 03rg20 code. i checked my firmware and it said i was the most update they had..
I had no trouble doing scarface,nero and dvd shrink only. I ran into a problem on a new I/O 16x burner that wouldn't burn maxell -4x-ritek go4's.It would spit them out and give me an illegal disc error. After updating the firmware,those ritekgo4's started burning again.Even the 2 discs I tried to burn before the update,were able to be burned-seeing as no actual burn started. This sounds exactly like your issue. I have not run into any verbs with that mfg code.My benq's seem to prefer the plus verbs.I had 1 coaster out of 2 with the verbatim -4x digital movie quality.Luckily I only bought a 5 pack.
Yeah im not sure what the deal is im going to take these back and exchange em out for some others i just redownloaded the firmware again so lets see what happens when i get back.. thanks for your help