Whats the best/easiest guide to putting a Nokia into debug mode?

I went and bought a dbox and forgot to check if it was in debug mode (forgot since 99% of the ones I see are in debug mode)

Is there anyway to do it without a null modem cable? I only have cat5 crossover cable, but could get a loan or buy a null modem cable if needs be.

I found this guide
http://www.dietmar-h.net/mhc_debug_en.html

Also found out my code is 017a10081320008 which is meant to mean it is much harder to do...

EDIT: This guide seems a bit better
http://cardsharing.homelinux.com/dbox2_tutorial.pdf

In that guide it says...

Do I need that image? could I put on an image from a working nokia dbox? I have a working image so could flash it, or generate a new one? but which one should I create, I am guessing it should not be the usual "without bootloader file"

 

2xIntel or 2xAMD?

 

2xIntel

 

Debug enable has nothing to do with a image.
You have to change a option inside the bootloader software.
You need the method with flashreset and ppcboot.
The method for a nokia BMon1.0 2xintel is not translated at the dietmarh site.
You have to find a english version by yourself.

 

I knew I couldnt just flash on an image. But that guy talked of using an image called "Zgore17072004" I wondered if I needed that or if I could use one of my own images (after doing all the other stuff)

The guide for dummies has it in english.

Thanks

 

If debug mode is enabled you can flash what you want.