1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Why does my Driver freeze right before the burning Process??

Discussion in 'DVDR' started by Tmb04, Jun 3, 2007.

  1. Tmb04

    Tmb04 Member

    Joined:
    Jun 12, 2013
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    I've been trying to burn for a long time without much progress. My problem is, everytime I try to burn anime using Nero, I'll always make it to the point to when it's about to burn it on to the DVD itself but it always Stops. No idea what the problem is...

    I use a HP DVD740e as my burner
    I use Maxell 4.7GB DVD+R's
    I use an older Version of Nero 7
    All my files are already converted into .VOB files
    I use NeroVision 4 when Burning
    I even bought a Brand New 320GB HD and my problem still occurs.

    It gets me irritated since I usually wait 2-3 hours for the anime to even get ready to burn, After all that waiting it'll always mess up on the burning process. I will tell you that I tried burning 1 single episode yesterday and it finally worked, but when I tried to burn 4 or 5 it always freezes... Can someone help me out?
     
  2. IHoe

    IHoe Senior member

    Joined:
    May 21, 2005
    Messages:
    6,431
    Likes Received:
    0
    Trophy Points:
    116
    you converted your files to VOB (DVD compliant files), then why are you using NeroVision and not Nero Burning Rom or Nero Recode? Would love to see a Nero log! NeroVision would be used to convert files, Nero Burning Rom would be used if you have DVD video that fits onto a DVD5 or DVD9, and Nero Recode if you have more than one video file to add to a DVD5 or DVD9! Let's look at a log please.
     
  3. Tmb04

    Tmb04 Member

    Joined:
    Jun 12, 2013
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11

    Windows 2000 5.0
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero API version: 7.0.1.4
    Using interface version: 7.0.0.0
    Installed in: C:\Program Files\Nero\Nero 7\Core\
    Application: ahead\NeroVision
    Internal Version: 7, 0, 1, 4

    Recorder: <HP DVD Writer 740e> Version: 42JH - HA 1 TA 1 - 7.0.1.4
    Adapter driver: <USB> HA 1
    Drive buffer : 2048kB
    Bus Type : set to ATAPI (3) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD3200JB-00KFA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    SAMSUNG CD-R/RW SW-248F D: CDRom0
    HP DVD Writer 740e E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (261112kB)
    Free physical memory: 55MB (57140kB)
    Memory in use : 78
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    3.6.2007
    NeroAPI
    12:23:59 PM #1 Phase 111 File APIProgress.cpp, Line 278
    DVD-Video files sorted

    12:24:00 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 39936KB of Memory

    12:24:00 PM #3 Text 0 File Reader.cpp, Line 124
    Reader running

    12:24:00 PM #4 Text 0 File Writer.cpp, Line 113
    Writer E: HP DVD Writer 740e running

    12:24:00 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    12:24:00 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    12:24:00 PM #7 Text 0 File Burncd.cpp, Line 3342
    Turn on Disc-At-Once, using DVD media

    12:24:00 PM #8 Text 0 File DlgWaitCD.cpp, Line 279
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 479343 (106:31.18, 936MB)

    12:24:00 PM #9 Text 0 File DlgWaitCD.cpp, Line 291
    Write in overburning mode: NO (enabled: CD)

    12:24:00 PM #10 Text 0 File DlgWaitCD.cpp, Line 2578
    Recorder: HP DVD Writer 740e, Media type: DVD+R
    Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
    Disc Application Code: 0, Extended Information Indicators: 3

    12:24:00 PM #11 Text 0 File DlgWaitCD.cpp, Line 458
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    12:24:00 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 479344 (479344) = #479344/106:31.19
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 479344 blocks [E: HP DVD Writer 740e]
    --------------------------------------------------------------

    12:24:00 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [E: HP DVD Writer 740e] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 981696512, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    479344 | lead-out | 1 | 0x41 | 0x00

    12:24:00 PM #14 Text 0 File SCSIPassThrough.cpp, Line 36
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    12:24:00 PM #15 Phase 24 File APIProgress.cpp, Line 278
    Caching of files started

    12:24:00 PM #16 Text 0 File Burncd.cpp, Line 4176
    Cache writing successful.

    12:24:00 PM #17 Phase 25 File APIProgress.cpp, Line 278
    Caching of files completed

    12:24:00 PM #18 Phase 28 File APIProgress.cpp, Line 278
    Speed measurement started

    12:24:00 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:24:18 PM #20 Text 0 File WriterStatus.cpp, Line 116
    <E: HP DVD Writer 740e> start writing Lead-Out at LBA 479344 (75070h), length 0 blocks

    12:24:18 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    12:24:18 PM #22 Phase 29 File APIProgress.cpp, Line 278
    Speed measurement completed: 43.2x (59,626 KB/s)

    12:24:18 PM #23 Phase 36 File APIProgress.cpp, Line 278
    Burn process started at 8x (11,080 KB/s)

    12:24:18 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:24:18 PM #25 Text 0 File Cdrdrv.cpp, Line 8411
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: RITEK...
    Media type ID: R03
    Product revision number: 2
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8
    23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l.²g......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    12:24:18 PM #26 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    12:27:36 PM #27 Text 0 File WriterStatus.cpp, Line 116
    <E: HP DVD Writer 740e> start writing Lead-Out at LBA 479344 (75070h), length 0 blocks

    12:27:36 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    12:28:33 PM #29 Phase 37 File APIProgress.cpp, Line 278
    Burn process completed successfully at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 6/1/2007 3:41:08 PM
    File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 6/1/2007 3:41:08 PM

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** NeroAPI, History File *** ======



    So your saying I was using the wrong program? Everytime I bring up Nero Startsmart I would always click on Make DVD- Video and it would take me to Nero Vision. But if it'll work with a different program i'll try it out
     
  4. IHoe

    IHoe Senior member

    Joined:
    May 21, 2005
    Messages:
    6,431
    Likes Received:
    0
    Trophy Points:
    116
    the file is from Roxio, or also can come in through WinAmp. If Roxio/Sonic installed then he/she will need Roxio Zapper to uninstall the program. As Nero and Roxio/Sonic sometimes have issues with each other! Uninstall Roxio/Sonic and run the zapper:
    http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml

    try closing some programs that are running in the background, no internet while burning, no multi tasking, and some members even shut their anti virus software off while burning!

    not the best of media. Use media MIJ (made in Japan) or Verbatim!

    turn your DMA on....... here's how:
    http://my.afterdawn.com/alkohol/blog_entry.cfm/231/dmaissues

    and if you have start smart..... look to the left where APPLICATIONS are listed..... pick your program there! If your files don't need conversion then use Nero Burning Rom or Nero Recode (I would pick Nero Recode!).


     
  5. Tmb04

    Tmb04 Member

    Joined:
    Jun 12, 2013
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    Okay I followed everything you said to do except to use different Media. I plan on ordering Taiyo Yuden or Verb soon.
    Well this Time I started burning the same exact thing using Nero Recode this time. The first time trying it made it to about 43% before an error happened. The Second and third time, The drive would keep on opening up and it would say insert blank DVD. I had a Blank DVD in there everytime and yet nothing worked... Think you can help me out again
     
  6. IHoe

    IHoe Senior member

    Joined:
    May 21, 2005
    Messages:
    6,431
    Likes Received:
    0
    Trophy Points:
    116
    why didn't you post your failed Nero log? Every time you have another problem please post your Nero log so we can see what went wrong, if you did make the changes and so forth! And it's important to use better media..... it's the easiest thing you can do and it stops many common problems from happening and it's something that IS in your control to fix right away! Starting off with good media is so important and most people dismiss it because they have a blank disk in their hands! It does matter what disk you are using .... some players have issues with certain manufactured disks because it doesn't have a write strategy in it's firmware to burn to properly so then you come up with errors! And it doesn't matter if you have a spindle of cheapo media.... not all disks made are put up to a quality standard when they are in production so when you buy cheapo media in a spindle you might get some that are not up to snuff and will not burn the same as others! There are some instances that some spindles will actually have different manufacturers of the same brand! So they are not the same even though it's the same brand! Stick with the MIJ rule. Or just buy Verbatim made in Singapore/Taiwan..... stay away from the Verbatim made in India (lesser quality).

    Can not seem to find a newer firmware update for your drive.
     
  7. Tmb04

    Tmb04 Member

    Joined:
    Jun 12, 2013
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11

    Windows 2000 5.0
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero API version: 7.0.1.4
    Using interface version: 7.0.0.0
    Installed in: C:\Program Files\Nero\Nero 7\Core\
    Application: ahead\NeroVision
    Internal Version: 7, 0, 1, 4

    Recorder: <HP DVD Writer 740e> Version: 42JH - HA 1 TA 1 - 7.0.1.4
    Adapter driver: <USB> HA 1
    Drive buffer : 2048kB
    Bus Type : set to ATAPI (3) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD3200JB-00KFA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    SAMSUNG CD-R/RW SW-248F D: CDRom0
    HP DVD Writer 740e E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (261112kB)
    Free physical memory: 55MB (57140kB)
    Memory in use : 78
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    3.6.2007
    NeroAPI
    12:23:59 PM #1 Phase 111 File APIProgress.cpp, Line 278
    DVD-Video files sorted

    12:24:00 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 39936KB of Memory

    12:24:00 PM #3 Text 0 File Reader.cpp, Line 124
    Reader running

    12:24:00 PM #4 Text 0 File Writer.cpp, Line 113
    Writer E: HP DVD Writer 740e running

    12:24:00 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    12:24:00 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    12:24:00 PM #7 Text 0 File Burncd.cpp, Line 3342
    Turn on Disc-At-Once, using DVD media

    12:24:00 PM #8 Text 0 File DlgWaitCD.cpp, Line 279
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 479343 (106:31.18, 936MB)

    12:24:00 PM #9 Text 0 File DlgWaitCD.cpp, Line 291
    Write in overburning mode: NO (enabled: CD)

    12:24:00 PM #10 Text 0 File DlgWaitCD.cpp, Line 2578
    Recorder: HP DVD Writer 740e, Media type: DVD+R
    Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
    Disc Application Code: 0, Extended Information Indicators: 3

    12:24:00 PM #11 Text 0 File DlgWaitCD.cpp, Line 458
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    12:24:00 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 479344 (479344) = #479344/106:31.19
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 479344 blocks [E: HP DVD Writer 740e]
    --------------------------------------------------------------

    12:24:00 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [E: HP DVD Writer 740e] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 981696512, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    479344 | lead-out | 1 | 0x41 | 0x00

    12:24:00 PM #14 Text 0 File SCSIPassThrough.cpp, Line 36
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    12:24:00 PM #15 Phase 24 File APIProgress.cpp, Line 278
    Caching of files started

    12:24:00 PM #16 Text 0 File Burncd.cpp, Line 4176
    Cache writing successful.

    12:24:00 PM #17 Phase 25 File APIProgress.cpp, Line 278
    Caching of files completed

    12:24:00 PM #18 Phase 28 File APIProgress.cpp, Line 278
    Speed measurement started

    12:24:00 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:24:18 PM #20 Text 0 File WriterStatus.cpp, Line 116
    <E: HP DVD Writer 740e> start writing Lead-Out at LBA 479344 (75070h), length 0 blocks

    12:24:18 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    12:24:18 PM #22 Phase 29 File APIProgress.cpp, Line 278
    Speed measurement completed: 43.2x (59,626 KB/s)

    12:24:18 PM #23 Phase 36 File APIProgress.cpp, Line 278
    Burn process started at 8x (11,080 KB/s)

    12:24:18 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:24:18 PM #25 Text 0 File Cdrdrv.cpp, Line 8411
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: RITEK...
    Media type ID: R03
    Product revision number: 2
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8
    23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l.²g......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    12:24:18 PM #26 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    12:27:36 PM #27 Text 0 File WriterStatus.cpp, Line 116
    <E: HP DVD Writer 740e> start writing Lead-Out at LBA 479344 (75070h), length 0 blocks

    12:27:36 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    12:28:33 PM #29 Phase 37 File APIProgress.cpp, Line 278
    Burn process completed successfully at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 6/1/2007 3:41:08 PM
    File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 6/1/2007 3:41:08 PM

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** NeroAPI, History File *** ======


    Windows 2000 5.0
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero API version: 7.0.1.4
    Using interface version: 7.0.0.0
    Installed in: C:\Program Files\Nero\Nero 7\Core\
    Application: Ahead\Nero Recode
    Internal Version: 7, 0, 1, 4

    Recorder: <HP DVD Writer 740e> Version: 42JH - HA 1 TA 1 - 7.0.1.4
    Adapter driver: <USB> HA 1
    Drive buffer : 2048kB
    Bus Type : set to ATAPI (3) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD3200JB-00KFA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    SAMSUNG CD-R/RW SW-248F D: CDRom2
    HP DVD Writer 740e E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (261112kB)
    Free physical memory: 140MB (144116kB)
    Memory in use : 44
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    3.6.2007
    NeroAPI
    5:01:42 PM #1 Text 0 File DlgWaitCD.cpp, Line 279
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: -1 ( 0:00.-1, 0MB)

    5:01:42 PM #2 Text 0 File DlgWaitCD.cpp, Line 291
    Write in overburning mode: NO

    5:01:42 PM #3 Text 0 File DlgWaitCD.cpp, Line 2578
    Recorder: HP DVD Writer 740e, Media type: DVD+R
    Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
    Disc Application Code: 0, Extended Information Indicators: 3

    5:01:42 PM #4 Text 0 File DlgWaitCD.cpp, Line 458
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    5:01:42 PM #5 Text 0 File SCSIPassThrough.cpp, Line 36
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    5:01:42 PM #6 Text 0 File Cdrdrv.cpp, Line 8411
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: RITEK...
    Media type ID: R03
    Product revision number: 2
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8
    23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l..g......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    5:01:42 PM #7 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    5:01:42 PM #8 Text 0 File BurnAtOnceRecorder.cpp, Line 1005
    Estimated filesystem size: 560

    5:01:42 PM #9 Phase 36 File APIProgress.cpp, Line 278
    Burn process started at 4x (5,540 KB/s)

    5:03:14 PM #10 Text 0 File BurnAtOnceRecorder.cpp, Line 675
    Reserved fragment at 0. Length: 608

    5:03:14 PM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 1874
    Reserved start fragment at 0

    5:03:15 PM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 675
    Reserved fragment at 608. Length: 32

    5:03:15 PM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
    Writing VTS_01_1.VOB at sector 640

    5:05:29 PM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 2638
    Finished writing file VTS_01_1.VOB of size 683165696 bytes (333577 sectors)

    5:05:29 PM #15 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
    Writing VTS_01_0.BUP at sector 334217

    5:05:29 PM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 2638
    Finished writing file VTS_01_0.BUP of size 26624 bytes (13 sectors)

    5:05:34 PM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
    Writing VTS_01_0.IFO at sector 608

    5:05:42 PM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 2618
    Successfully released fragment at 608

    5:05:42 PM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 2638
    Finished writing file VTS_01_0.IFO of size 26624 bytes (13 sectors)

    5:05:48 PM #20 Text 0 File BurnAtOnceRecorder.cpp, Line 650
    Successfully released fragment at 640

    5:05:52 PM #21 Text 0 File BurnAtOnceRecorder.cpp, Line 675
    Reserved fragment at 334256. Length: 32

    5:05:52 PM #22 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
    Writing VTS_02_1.VOB at sector 334288

    5:07:59 PM #23 Text 0 File BurnAtOnceRecorder.cpp, Line 2638
    Finished writing file VTS_02_1.VOB of size 689799168 bytes (336816 sectors)

    5:07:59 PM #24 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
    Writing VTS_02_0.BUP at sector 671104

    5:07:59 PM #25 Text 0 File BurnAtOnceRecorder.cpp, Line 2638
    Finished writing file VTS_02_0.BUP of size 26624 bytes (13 sectors)

    5:08:04 PM #26 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
    Writing VTS_02_0.IFO at sector 334256

    5:08:22 PM #27 Text 0 File BurnAtOnceRecorder.cpp, Line 2618
    Successfully released fragment at 334256

    5:08:22 PM #28 Text 0 File BurnAtOnceRecorder.cpp, Line 2638
    Finished writing file VTS_02_0.IFO of size 26624 bytes (13 sectors)

    5:08:30 PM #29 Text 0 File BurnAtOnceRecorder.cpp, Line 650
    Successfully released fragment at 334288

    5:08:34 PM #30 Text 0 File BurnAtOnceRecorder.cpp, Line 675
    Reserved fragment at 671136. Length: 32

    5:08:34 PM #31 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
    Writing VTS_03_1.VOB at sector 671168

    5:18:36 PM #32 SPTI -600 File SCSIPassThrough.cpp, Line 323
    E: CdRom1: SCSIStatus(x00) WinError(121) NeroError(-600)
    Sense Key: 0x00 (KEY_NO_SENSE)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 0A 40 70 00 00 10 00 00 00
    Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
    Buffer x0c25e200: Len x8000
    0x00 00 01 BA 44 00 3F 3F F4 8D 01 89 C3 F8 00 00
    0x01 E0 07 EC 80 00 00 45 1B 23 9D 20 DA A9 1C E8
    0xA9 1F BC 57 91 53 20 7E FF FA 07 EF FF A6 F2 06

    5:18:36 PM #33 Text 0 File BurnAtOnceRecorder.cpp, Line 2120
    Failed to write cache to disc at 671856

    5:18:36 PM #34 Phase 179 File APIProgress.cpp, Line 278
    Writing file to disc failed

    5:18:37 PM #35 Text 0 File BurnAtOnceRecorder.cpp, Line 3640
    Disc info:
    Partitions: 0

    5:18:41 PM #36 Phase 38 File APIProgress.cpp, Line 278
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** NeroAPI, History File *** ======


    Windows 2000 5.0
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero API version: 7.0.1.4
    Using interface version: 7.0.0.0
    Installed in: C:\Program Files\Nero\Nero 7\Core\
    Application: Ahead\Nero Recode
    Internal Version: 7, 0, 1, 4

    Recorder: <HP DVD Writer 740e> Version: 42JH - HA 1 TA 1 - 7.0.1.4
    Adapter driver: <USB> HA 1
    Drive buffer : 2048kB
    Bus Type : set to ATAPI (3) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD3200JB-00KFA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    SAMSUNG CD-R/RW SW-248F D: CDRom2
    HP DVD Writer 740e E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (261112kB)
    Free physical memory: 148MB (152560kB)
    Memory in use : 41
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    3.6.2007
    NeroAPI
    5:27:43 PM #1 Text 0 File DlgWaitCD.cpp, Line 279
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: -1 ( 0:00.-1, 0MB)

    5:27:43 PM #2 Text 0 File DlgWaitCD.cpp, Line 291
    Write in overburning mode: NO

    5:27:43 PM #3 Text 0 File DlgWaitCD.cpp, Line 2578
    Recorder: HP DVD Writer 740e, Media type: DVD+R
    Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
    Disc Application Code: 0, Extended Information Indicators: 3

    5:27:43 PM #4 Text 0 File DlgWaitCD.cpp, Line 458
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    5:27:43 PM #5 Text 0 File SCSIPassThrough.cpp, Line 36
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    5:27:43 PM #6 Text 0 File Cdrdrv.cpp, Line 8411
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: RITEK...
    Media type ID: R03
    Product revision number: 2
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8
    23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l..g......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    5:27:43 PM #7 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    5:27:43 PM #8 Text 0 File BurnAtOnceRecorder.cpp, Line 1005
    Estimated filesystem size: 560

    5:27:43 PM #9 Phase 36 File APIProgress.cpp, Line 278
    Burn process started at 4x (5,540 KB/s)

    5:28:15 PM #10 SPTI -1135 File SCSIPassThrough.cpp, Line 323
    E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x80
    CDB Data: 0x53 00 00 00 00 00 00 02 50 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80

    5:28:15 PM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 679
    Error reserving fragment (0)

    5:28:15 PM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 3640
    Disc info:
    Partitions: 0

    5:28:15 PM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 1864
    Error reserving start segment

    5:28:15 PM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 3640
    Disc info:
    Partitions: 0

    5:28:15 PM #15 Phase 179 File APIProgress.cpp, Line 278
    Writing file to disc failed

    5:28:15 PM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 3640
    Disc info:
    Partitions: 0

    5:28:22 PM #17 Phase 38 File APIProgress.cpp, Line 278
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** NeroAPI, History File *** ======


    Well there's my failed Nero Log. I'll order the new Media Later on today. It'll take a couple days to get here using Newegg. But if I can help in any other way than just say so.
     
  8. IHoe

    IHoe Senior member

    Joined:
    May 21, 2005
    Messages:
    6,431
    Likes Received:
    0
    Trophy Points:
    116
    are you using your Samsung drive to read the DVD? if so you still have a DMA problem that might cause your 2-3 hour processing time! Please try to reset your drives DMA setting:
    http://my.afterdawn.com/alkohol/blog_entry.cfm/231/dmaissues

    When the error code is all zeros, there are many cases where the error code the drive produces is not received by the program due to an unstable connection or interference from running programs. If the problem is not solved when you try the suggested actions, get your drive checked.

    **030C08
    Write error - recovery failed
    There are many cases where there is a problem with the disc, or information cannot be retrieved from the disc properly. The computer may be unstable or try a new disc.

    let's see what happens when you get new media!

     
  9. Tmb04

    Tmb04 Member

    Joined:
    Jun 12, 2013
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11

    Windows 2000 5.0
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero API version: 7.0.1.4
    Using interface version: 7.0.0.0
    Installed in: C:\Program Files\Nero\Nero 7\Core\
    Application: ahead\NeroVision
    Internal Version: 7, 0, 1, 4

    Recorder: <HP DVD Writer 740e> Version: 42JH - HA 1 TA 1 - 7.0.1.4
    Adapter driver: <USB> HA 1
    Drive buffer : 2048kB
    Bus Type : set to ATAPI (3) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD3200JB-00KFA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    SAMSUNG CD-R/RW SW-248F D: CDRom0
    HP DVD Writer 740e E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (261112kB)
    Free physical memory: 55MB (57140kB)
    Memory in use : 78
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    3.6.2007
    NeroAPI
    12:23:59 PM #1 Phase 111 File APIProgress.cpp, Line 278
    DVD-Video files sorted

    12:24:00 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 39936KB of Memory

    12:24:00 PM #3 Text 0 File Reader.cpp, Line 124
    Reader running

    12:24:00 PM #4 Text 0 File Writer.cpp, Line 113
    Writer E: HP DVD Writer 740e running

    12:24:00 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    12:24:00 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    12:24:00 PM #7 Text 0 File Burncd.cpp, Line 3342
    Turn on Disc-At-Once, using DVD media

    12:24:00 PM #8 Text 0 File DlgWaitCD.cpp, Line 279
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 479343 (106:31.18, 936MB)

    12:24:00 PM #9 Text 0 File DlgWaitCD.cpp, Line 291
    Write in overburning mode: NO (enabled: CD)

    12:24:00 PM #10 Text 0 File DlgWaitCD.cpp, Line 2578
    Recorder: HP DVD Writer 740e, Media type: DVD+R
    Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
    Disc Application Code: 0, Extended Information Indicators: 3

    12:24:00 PM #11 Text 0 File DlgWaitCD.cpp, Line 458
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    12:24:00 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 479344 (479344) = #479344/106:31.19
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 479344 blocks [E: HP DVD Writer 740e]
    --------------------------------------------------------------

    12:24:00 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [E: HP DVD Writer 740e] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 981696512, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    479344 | lead-out | 1 | 0x41 | 0x00

    12:24:00 PM #14 Text 0 File SCSIPassThrough.cpp, Line 36
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    12:24:00 PM #15 Phase 24 File APIProgress.cpp, Line 278
    Caching of files started

    12:24:00 PM #16 Text 0 File Burncd.cpp, Line 4176
    Cache writing successful.

    12:24:00 PM #17 Phase 25 File APIProgress.cpp, Line 278
    Caching of files completed

    12:24:00 PM #18 Phase 28 File APIProgress.cpp, Line 278
    Speed measurement started

    12:24:00 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:24:18 PM #20 Text 0 File WriterStatus.cpp, Line 116
    <E: HP DVD Writer 740e> start writing Lead-Out at LBA 479344 (75070h), length 0 blocks

    12:24:18 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    12:24:18 PM #22 Phase 29 File APIProgress.cpp, Line 278
    Speed measurement completed: 43.2x (59,626 KB/s)

    12:24:18 PM #23 Phase 36 File APIProgress.cpp, Line 278
    Burn process started at 8x (11,080 KB/s)

    12:24:18 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:24:18 PM #25 Text 0 File Cdrdrv.cpp, Line 8411
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: RITEK...
    Media type ID: R03
    Product revision number: 2
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8
    23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l.²g......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    12:24:18 PM #26 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    12:27:36 PM #27 Text 0 File WriterStatus.cpp, Line 116
    <E: HP DVD Writer 740e> start writing Lead-Out at LBA 479344 (75070h), length 0 blocks

    12:27:36 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    12:28:33 PM #29 Phase 37 File APIProgress.cpp, Line 278
    Burn process completed successfully at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 6/1/2007 3:41:08 PM
    File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 6/1/2007 3:41:08 PM

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** NeroAPI, History File *** ======


    Windows 2000 5.0
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero API version: 7.0.1.4
    Using interface version: 7.0.0.0
    Installed in: C:\Program Files\Nero\Nero 7\Core\
    Application: Ahead\Nero Recode
    Internal Version: 7, 0, 1, 4

    Recorder: <HP DVD Writer 740e> Version: 42JH - HA 1 TA 1 - 7.0.1.4
    Adapter driver: <USB> HA 1
    Drive buffer : 2048kB
    Bus Type : set to ATAPI (3) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD3200JB-00KFA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    SAMSUNG CD-R/RW SW-248F D: CDRom2
    HP DVD Writer 740e E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (261112kB)
    Free physical memory: 140MB (144116kB)
    Memory in use : 44
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    3.6.2007
    NeroAPI
    5:01:42 PM #1 Text 0 File DlgWaitCD.cpp, Line 279
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: -1 ( 0:00.-1, 0MB)

    5:01:42 PM #2 Text 0 File DlgWaitCD.cpp, Line 291
    Write in overburning mode: NO

    5:01:42 PM #3 Text 0 File DlgWaitCD.cpp, Line 2578
    Recorder: HP DVD Writer 740e, Media type: DVD+R
    Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
    Disc Application Code: 0, Extended Information Indicators: 3

    5:01:42 PM #4 Text 0 File DlgWaitCD.cpp, Line 458
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    5:01:42 PM #5 Text 0 File SCSIPassThrough.cpp, Line 36
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    5:01:42 PM #6 Text 0 File Cdrdrv.cpp, Line 8411
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: RITEK...
    Media type ID: R03
    Product revision number: 2
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8
    23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l..g......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    5:01:42 PM #7 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    5:01:42 PM #8 Text 0 File BurnAtOnceRecorder.cpp, Line 1005
    Estimated filesystem size: 560

    5:01:42 PM #9 Phase 36 File APIProgress.cpp, Line 278
    Burn process started at 4x (5,540 KB/s)

    5:03:14 PM #10 Text 0 File BurnAtOnceRecorder.cpp, Line 675
    Reserved fragment at 0. Length: 608

    5:03:14 PM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 1874
    Reserved start fragment at 0

    5:03:15 PM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 675
    Reserved fragment at 608. Length: 32

    5:03:15 PM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
    Writing VTS_01_1.VOB at sector 640

    5:05:29 PM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 2638
    Finished writing file VTS_01_1.VOB of size 683165696 bytes (333577 sectors)

    5:05:29 PM #15 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
    Writing VTS_01_0.BUP at sector 334217

    5:05:29 PM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 2638
    Finished writing file VTS_01_0.BUP of size 26624 bytes (13 sectors)

    5:05:34 PM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
    Writing VTS_01_0.IFO at sector 608

    5:05:42 PM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 2618
    Successfully released fragment at 608

    5:05:42 PM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 2638
    Finished writing file VTS_01_0.IFO of size 26624 bytes (13 sectors)

    5:05:48 PM #20 Text 0 File BurnAtOnceRecorder.cpp, Line 650
    Successfully released fragment at 640

    5:05:52 PM #21 Text 0 File BurnAtOnceRecorder.cpp, Line 675
    Reserved fragment at 334256. Length: 32

    5:05:52 PM #22 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
    Writing VTS_02_1.VOB at sector 334288

    5:07:59 PM #23 Text 0 File BurnAtOnceRecorder.cpp, Line 2638
    Finished writing file VTS_02_1.VOB of size 689799168 bytes (336816 sectors)

    5:07:59 PM #24 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
    Writing VTS_02_0.BUP at sector 671104

    5:07:59 PM #25 Text 0 File BurnAtOnceRecorder.cpp, Line 2638
    Finished writing file VTS_02_0.BUP of size 26624 bytes (13 sectors)

    5:08:04 PM #26 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
    Writing VTS_02_0.IFO at sector 334256

    5:08:22 PM #27 Text 0 File BurnAtOnceRecorder.cpp, Line 2618
    Successfully released fragment at 334256

    5:08:22 PM #28 Text 0 File BurnAtOnceRecorder.cpp, Line 2638
    Finished writing file VTS_02_0.IFO of size 26624 bytes (13 sectors)

    5:08:30 PM #29 Text 0 File BurnAtOnceRecorder.cpp, Line 650
    Successfully released fragment at 334288

    5:08:34 PM #30 Text 0 File BurnAtOnceRecorder.cpp, Line 675
    Reserved fragment at 671136. Length: 32

    5:08:34 PM #31 Text 0 File BurnAtOnceRecorder.cpp, Line 1401
    Writing VTS_03_1.VOB at sector 671168

    5:18:36 PM #32 SPTI -600 File SCSIPassThrough.cpp, Line 323
    E: CdRom1: SCSIStatus(x00) WinError(121) NeroError(-600)
    Sense Key: 0x00 (KEY_NO_SENSE)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 0A 40 70 00 00 10 00 00 00
    Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
    Buffer x0c25e200: Len x8000
    0x00 00 01 BA 44 00 3F 3F F4 8D 01 89 C3 F8 00 00
    0x01 E0 07 EC 80 00 00 45 1B 23 9D 20 DA A9 1C E8
    0xA9 1F BC 57 91 53 20 7E FF FA 07 EF FF A6 F2 06

    5:18:36 PM #33 Text 0 File BurnAtOnceRecorder.cpp, Line 2120
    Failed to write cache to disc at 671856

    5:18:36 PM #34 Phase 179 File APIProgress.cpp, Line 278
    Writing file to disc failed

    5:18:37 PM #35 Text 0 File BurnAtOnceRecorder.cpp, Line 3640
    Disc info:
    Partitions: 0

    5:18:41 PM #36 Phase 38 File APIProgress.cpp, Line 278
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** NeroAPI, History File *** ======


    Windows 2000 5.0
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero API version: 7.0.1.4
    Using interface version: 7.0.0.0
    Installed in: C:\Program Files\Nero\Nero 7\Core\
    Application: Ahead\Nero Recode
    Internal Version: 7, 0, 1, 4

    Recorder: <HP DVD Writer 740e> Version: 42JH - HA 1 TA 1 - 7.0.1.4
    Adapter driver: <USB> HA 1
    Drive buffer : 2048kB
    Bus Type : set to ATAPI (3) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD3200JB-00KFA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    SAMSUNG CD-R/RW SW-248F D: CDRom2
    HP DVD Writer 740e E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (261112kB)
    Free physical memory: 148MB (152560kB)
    Memory in use : 41
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    3.6.2007
    NeroAPI
    5:27:43 PM #1 Text 0 File DlgWaitCD.cpp, Line 279
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: -1 ( 0:00.-1, 0MB)

    5:27:43 PM #2 Text 0 File DlgWaitCD.cpp, Line 291
    Write in overburning mode: NO

    5:27:43 PM #3 Text 0 File DlgWaitCD.cpp, Line 2578
    Recorder: HP DVD Writer 740e, Media type: DVD+R
    Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2
    Disc Application Code: 0, Extended Information Indicators: 3

    5:27:43 PM #4 Text 0 File DlgWaitCD.cpp, Line 458
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    5:27:43 PM #5 Text 0 File SCSIPassThrough.cpp, Line 36
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    5:27:43 PM #6 Text 0 File Cdrdrv.cpp, Line 8411
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: RITEK...
    Media type ID: R03
    Product revision number: 2
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8
    23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l..g......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    5:27:43 PM #7 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    5:27:43 PM #8 Text 0 File BurnAtOnceRecorder.cpp, Line 1005
    Estimated filesystem size: 560

    5:27:43 PM #9 Phase 36 File APIProgress.cpp, Line 278
    Burn process started at 4x (5,540 KB/s)

    5:28:15 PM #10 SPTI -1135 File SCSIPassThrough.cpp, Line 323
    E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x80
    CDB Data: 0x53 00 00 00 00 00 00 02 50 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80

    5:28:15 PM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 679
    Error reserving fragment (0)

    5:28:15 PM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 3640
    Disc info:
    Partitions: 0

    5:28:15 PM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 1864
    Error reserving start segment

    5:28:15 PM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 3640
    Disc info:
    Partitions: 0

    5:28:15 PM #15 Phase 179 File APIProgress.cpp, Line 278
    Writing file to disc failed

    5:28:15 PM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 3640
    Disc info:
    Partitions: 0

    5:28:22 PM #17 Phase 38 File APIProgress.cpp, Line 278
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** NeroAPI, History File *** ======


    Windows 2000 5.0
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero API version: 7.0.1.4
    Using interface version: 7.0.0.0
    Installed in: C:\Program Files\Nero\Nero 7\Core\
    Application: Ahead\Nero Recode
    Internal Version: 7, 0, 1, 4

    Recorder: <HP DVD Writer 740e> Version: 42JH - HA 1 TA 1 - 7.0.1.4
    Adapter driver: <USB> HA 1
    Drive buffer : 2048kB
    Bus Type : set to ATAPI (3) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD3200JB-00KFA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    SAMSUNG CD-R/RW SW-248F D: CDRom0
    HP DVD Writer 740e E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (261112kB)
    Free physical memory: 99MB (102052kB)
    Memory in use : 60
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    5.6.2007
    NeroAPI
    1:03:26 PM #1 Text 0 File DlgWaitCD.cpp, Line 279
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: -1 ( 0:00.-1, 0MB)

    1:03:26 PM #2 Text 0 File DlgWaitCD.cpp, Line 291
    Write in overburning mode: NO

    1:03:26 PM #3 Text 0 File DlgWaitCD.cpp, Line 2578
    Recorder: HP DVD Writer 740e, Media type: DVD+R
    Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 7

    1:03:26 PM #4 Text 0 File DlgWaitCD.cpp, Line 458
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    1:03:26 PM #5 Text 0 File SCSIPassThrough.cpp, Line 36
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    1:03:27 PM #6 Text 0 File Cdrdrv.cpp, Line 8411
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: MCC.....
    Media type ID: 004
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
    23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    1:03:27 PM #7 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    1:03:27 PM #8 Text 0 File BurnAtOnceRecorder.cpp, Line 1005
    Estimated filesystem size: 560

    1:03:27 PM #9 Phase 36 File APIProgress.cpp, Line 278
    Burn process started at 4x (5,540 KB/s)

    1:04:28 PM #10 SPTI -1135 File SCSIPassThrough.cpp, Line 323
    E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x80
    CDB Data: 0x53 00 00 00 00 00 00 02 50 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80

    1:04:28 PM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 679
    Error reserving fragment (0)

    1:04:28 PM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 3640
    Disc info:
    Partitions: 0

    1:04:28 PM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 1864
    Error reserving start segment

    1:04:29 PM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 3640
    Disc info:
    Partitions: 0

    1:04:29 PM #15 Phase 179 File APIProgress.cpp, Line 278
    Writing file to disc failed

    1:04:29 PM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 3640
    Disc info:
    Partitions: 0

    1:04:35 PM #17 Phase 38 File APIProgress.cpp, Line 278
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** NeroAPI, History File *** ======

    I got brand new Verbatim DVD+R 16X. After trying to burn once again using Nero Recode, it stopped at 13% this time. So if the media isn't my problem than I'm guessing it's my driver. But I'll wait to see what someone has to say first
     
  10. IHoe

    IHoe Senior member

    Joined:
    May 21, 2005
    Messages:
    6,431
    Likes Received:
    0
    Trophy Points:
    116
    Nero is not writing anything....... check the 0MB! not good! something is going on with Nero why it's not writing anything! and that's why it says:
    don't know what else to tell you! check that your drive is hooked up correctly?! How old is your burner? how old is the computer? and when did you get Nero? maybe it's time to update Nero to a better version of Nero 7:
    use a more stable version of Nero 7: 7.5.7.0
    Before updating to this version .... save your serial #, uninstall Nero, then use this free registry cleaner called CCleaner, then Nero7 Clean tool http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html reboot and defrag!

    and then reinstall 7.5.7.0 from here
    http://www.filehippo.com/download_nero_7_premium/?1708

    it's worth a try!
     

Share This Page