hey when i start to burn a dvd+r with decrypter i stick it in all goes well buffer 100 percent then after that device buffer doesent even get 1 percent like it just sits there after it runs though buffer then it will just sit there trying to go through device buffer any 1 know why?
The buffer shouldn't reach %100. This means something is wrong. You don't have enough RAM or your disc is dirty. It's having a hard time reading.
it has before i thought thats what it was supposed to do load the buffer and the device buffer then continue to burn it this is what decrypter says when i stick the media in HP DVD Writer 200j 1.36 (ATA) Current Profile: DVD+R Disc Information: Status: Empty Erasable: No Free Sectors: 2,295,104 Free Space: 4,700,372,992 bytes Free Time: 510:03:29 (MM:SS:FF) Supported Write Speeds: 2x, 2.4x its finished discs before but they never played on my home player or computer..with them running through buffer and device buffer btw
Go into your device manager and check your IDE controllers. They should be set on DMA not PIO. Change both back to DMA if needed. If they won't stay on DMA, remove the IDE controllers from the list and re-boot. That will set them back to DMA when Windows re-installs them. Jerry
Several different reasons why Windows reverts back to PIO. Read errors too many time is one. Anyway here we go. Click start--then settings--control panel--click system--then hardware--then IDE ATA/ATAPI controllers--the click either Primary or Secondary channels--then advance setting on each one. Thats where the DMA/PIO settings are. Jerry
both of them where on DMA heres a log of decryptor running I 21:46:03 DVD Decrypter Version 3.5.2.0 started! I 21:46:03 Microsoft Windows XP Home Edition (5.1, Build 2600) W 21:46:03 Drive D:\ (FAT32) does not support single files > 4 GB I 21:46:03 Initialising SPTI... I 21:46:03 Searching for SCSI / ATAPI devices... I 21:46:03 Found 1 CD-ROM and 1 DVD+RW! I 21:47:02 Operation Started! I 21:47:02 Source File: C:\Documents and Settings\Owner\My Documents\My Videos\SKY_CAPTAIN_169.MDS I 21:47:02 Source File Sectors: 2,285,848 (MODE1/2048) I 21:47:02 Source File Size: 4,681,416,704 bytes I 21:47:02 Destination Device: [1:0:0] HP DVD Writer 200j 1.36 (E (ATA) I 21:47:03 Destination Media Type: DVD+R (Speeds: 2x, 2.4x) I 21:47:03 Destination Media Sectors: 2,295,104 I 21:47:03 Write Mode: DVD I 21:47:03 Write Speed: 4x I 21:47:03 Test Mode: No I 21:47:03 BURN-Proof: Enabled I 21:47:03 Filling Buffer... I 21:47:03 Writing LeadIn... W 21:48:50 Failed to Write Sectors 0 - 31 - Unknown (0x91, 0xC2) W 21:48:51 Retrying (1 of 20)... W 21:49:36 Retry Failed - Unknown (0x91, 0xC2) W 21:49:36 Retrying (2 of 20)... W 21:50:36 Retry Failed - Unknown (0x91, 0xC2) W 21:50:36 Retrying (3 of 20)... W 21:51:51 Retry Failed - Unknown (0x91, 0xC2) W 21:51:51 Retrying (4 of 20)...
.MDS file?? hmmmm maybe.. Anyway how did you compress your movie to fit on your disk? (DVD Shrink?) Can you tell your process for ripping, reauthoring, and burning?
