1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Write error DVD still can't burn

Discussion in 'DVD±R for advanced users' started by aileenc07, Jun 24, 2007.

  1. aileenc07

    aileenc07 Guest

    I still can't burn on my dvd ram, i googled it up but i still don't know what to do, pls help me, i'm using nero, here's my log:

    Windows XP 5.1
    IA32
    WinAspi: -

    NT-SPTI used
    Nero Version: 7.9.6.0
    Internal Version: 7, 9, 6, 0
    (Nero Express)
    Recorder: <HL-DT-ST DVD-RAM GSA-H22L>Version: 1.02 - HA 1 TA 0 - 7.9.6.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-RAM GSA-H22L>Version: 1.02 - HA 1 TA 0 - 7.9.6.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H22L atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-RAM GSA-H22L E: CdRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 767MB (785904kB)
    Free physical memory: 248MB (254760kB)
    Memory in use : 67 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    25.6.2007
    ISO compilation
    3:31:04 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    3:31:04 PM #2 Text 0 File Isodoc.cpp, Line 6663
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    3:31:04 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
    First writeable address = 0 (0x00000000)

    3:31:05 PM #4 Text 0 File Burncd.cpp, Line 3508
    Turn on Disc-At-Once, using DVD media

    3:31:05 PM #5 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2077263 (461:36.63, 4057MB)

    3:31:05 PM #6 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)

    3:31:05 PM #7 Text 0 File DlgWaitCD.cpp, Line 2964
    Recorder: HL-DT-ST DVD-RAM GSA-H22L, Media type: DVD-R
    Disc Manufacturer: RITEKG - 05
    Disc Application Code: 64, Disc Physical Code: 193

    3:31:05 PM #8 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    3:31:05 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2077264 (2077264) = #2077264/461:36.64
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2077264 blocks [E: HL-DT-ST DVD-RAM GSA-H22L]
    --------------------------------------------------------------

    3:31:05 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [E: HL-DT-ST DVD-RAM GSA-H22L] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4254236672, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 2077264 | 0 | 0x00
    2077264 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    3:31:06 PM #11 Text 0 File SCSIPTICommands.cpp, Line 215
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    3:31:06 PM #12 Text 0 File Burncd.cpp, Line 4294
    Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

    3:31:06 PM #13 Phase 24 File dlgbrnst.cpp, Line 1762
    Caching of files started

    3:31:45 PM #14 Text 0 File Burncd.cpp, Line 4413
    Cache writing successful.

    3:31:45 PM #15 Phase 25 File dlgbrnst.cpp, Line 1762
    Caching of files completed

    3:31:45 PM #16 Phase 36 File dlgbrnst.cpp, Line 1762
    Burn process started at 8x (11,080 KB/s)

    3:31:45 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    3:31:45 PM #18 Text 0 File DVDR.cpp, Line 3225
    Recording mode: Sequential Recording Mode

    3:31:45 PM #19 Text 0 File DVDR.cpp, Line 3381
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    3:31:45 PM #20 SPTI -1066 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
    Buffer x084e6400: Len x648

    3:31:45 PM #21 Text 0 File Cdrdrv.cpp, Line 9872
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Revision number of maximum recording speed: 3.0
    Revision number of minimum recording speed: 0.0
    Revision number table of recording speed: 0.1 0.2 0.3 - - - 0.4
    Class: 0
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    3:31:45 PM #22 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 83836800

    3:34:12 PM #23 SPTI -1135 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x80
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
    Buffer x093e0040: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    3:34:12 PM #24 CDR -1135 File Writer.cpp, Line 303
    Write error
    E: HL-DT-ST DVD-RAM GSA-H22L

    3:34:12 PM #25 Text 0 File DVDR.cpp, Line 3783
    EndDAO: Last written address was -1 (FFFFFFFFh)

    3:34:12 PM #26 Phase 38 File dlgbrnst.cpp, Line 1762
    Burn process failed at 8x (11,080 KB/s)

    3:34:13 PM #27 Text 0 File SCSIPTICommands.cpp, Line 261
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    3:34:17 PM #28 Text 0 File Cdrdrv.cpp, Line 11185
    DriveLocker: UnLockVolume completed

    3:34:18 PM #29 Text 0 File SCSIPTICommands.cpp, Line 424
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


    and can i ask? why is there nothing shown in my existing drivers?
    sorry for my english...
    pls reply fast....
     
    Last edited by a moderator: Jun 24, 2007
  2. Rotary

    Rotary Senior member

    Joined:
    Apr 10, 2003
    Messages:
    8,353
    Likes Received:
    0
    Trophy Points:
    116
    is it a USB drive?

    i think that error above means your drive doesnt like the dvdr used, if i remeber correctly?

    could try a firmware update to the drive...

    also try useing another burn app, what file type you trying to burn? are they vob/ifo/bups? or .nrg or .iso?
     
    Last edited: Jun 25, 2007
  3. killalot

    killalot Active member

    Joined:
    Nov 7, 2002
    Messages:
    1,035
    Likes Received:
    0
    Trophy Points:
    66
    3:31:05 PM #7 Text 0 File DlgWaitCD.cpp, Line 2964
    Recorder: HL-DT-ST DVD-RAM GSA-H22L, Media type: DVD-R
    Disc Manufacturer: RITEKG - 05
    Disc Application Code: 64, Disc Physical Code: 193

    I wouldn’t say it’s the disk RITEK G–05 I use them always been on the money I’d say it’s a problem with Nero 7 gave up on version 7 a long time ago works on some computers but on the wider scale doesn’t work on a lot of them might have a bad batch of ritek you never know like its been said try another program first see if it cures the problem
     
  4. aileenc07

    aileenc07 Guest

    no, its not usb drive,i think i installed the latest firmware, can u check pls? and im trying to burn data dvd so theres a lot of file types in there... pls help me...
     
    Last edited by a moderator: Jun 25, 2007
  5. aileenc07

    aileenc07 Guest

    is there another way???...pls help me...
     
    Last edited by a moderator: Jun 25, 2007
  6. Rotary

    Rotary Senior member

    Joined:
    Apr 10, 2003
    Messages:
    8,353
    Likes Received:
    0
    Trophy Points:
    116
  7. aileenc07

    aileenc07 Guest


    i followed the instructions on how to install it but i think nothing is change...i tried burning again bu i still can't, here's my new log:

    Windows XP 5.1
    IA32
    WinAspi: -

    NT-SPTI used
    Nero Version: 7.9.6.0
    Internal Version: 7, 9, 6, 0
    (Nero Express)
    Recorder: <HL-DT-ST DVD-RAM GSA-H22L>Version: 1.02 - HA 1 TA 0 - 7.9.6.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-RAM GSA-H22L>Version: 1.02 - HA 1 TA 0 - 7.9.6.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H22L atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-RAM GSA-H22L E: CdRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 767MB (785904kB)
    Free physical memory: 339MB (347556kB)
    Memory in use : 55 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    25.6.2007
    ISO compilation
    7:03:35 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    7:03:36 PM #2 Text 0 File Isodoc.cpp, Line 6663
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    7:03:38 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
    First writeable address = 0 (0x00000000)

    7:03:40 PM #4 Text 0 File Burncd.cpp, Line 3508
    Turn on Disc-At-Once, using DVD media

    7:03:41 PM #5 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 2297887 (510:38.37, 4488MB)
    Last address to be written: 1374271 (305:23.46, 2684MB)

    7:03:41 PM #6 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)

    7:03:41 PM #7 Text 0 File DlgWaitCD.cpp, Line 2964
    Recorder: HL-DT-ST DVD-RAM GSA-H22L, Media type: DVD-R
    Disc Manufacturer: RITEKG - 05
    Disc Application Code: 64, Disc Physical Code: 193

    7:03:41 PM #8 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    7:03:41 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1374272 (1374272) = #1374272/305:23.47
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1374272 blocks [E: HL-DT-ST DVD-RAM GSA-H22L]
    --------------------------------------------------------------

    7:03:41 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [E: HL-DT-ST DVD-RAM GSA-H22L] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2814509056, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 1374272 | 0 | 0x00
    1374272 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    7:03:42 PM #11 Text 0 File SCSIPTICommands.cpp, Line 215
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    7:03:42 PM #12 Text 0 File Burncd.cpp, Line 4294
    Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

    7:03:42 PM #13 Phase 24 File dlgbrnst.cpp, Line 1762
    Caching of files started

    7:04:14 PM #14 Text 0 File Burncd.cpp, Line 4413
    Cache writing successful.

    7:04:14 PM #15 Phase 25 File dlgbrnst.cpp, Line 1762
    Caching of files completed

    7:04:14 PM #16 Phase 36 File dlgbrnst.cpp, Line 1762
    Burn process started at 8x (11,080 KB/s)

    7:04:14 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    7:04:14 PM #18 Text 0 File DVDR.cpp, Line 3225
    Recording mode: Sequential Recording Mode for Multisession

    7:04:14 PM #19 Text 0 File DVDR.cpp, Line 3381
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    7:04:14 PM #20 SPTI -1066 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
    Buffer x07738000: Len x648

    7:04:14 PM #21 Text 0 File Cdrdrv.cpp, Line 9872
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Revision number of maximum recording speed: 3.0
    Revision number of minimum recording speed: 0.0
    Revision number table of recording speed: 0.1 0.2 0.3 - - - 0.4
    Class: 0
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    7:04:14 PM #22 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 83836800

    7:05:22 PM #23 SPTI -1135 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x80
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
    Buffer x09060040: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    7:05:22 PM #24 CDR -1135 File Writer.cpp, Line 303
    Write error
    E: HL-DT-ST DVD-RAM GSA-H22L

    7:05:22 PM #25 Phase 133 File dlgbrnst.cpp, Line 1762
    Writing short lead-out

    7:07:02 PM #26 SPTI -1135 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x80
    CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80

    7:07:02 PM #27 Text 0 File DVDR.cpp, Line 3783
    EndDAO: Last written address was -1 (FFFFFFFFh)Close Session/Border, function 2, track: 3, finalize disc: NO, ret: -1135

    7:07:02 PM #28 CDR -1135 File WriterStatus.cpp, Line 162
    Write error
    E: HL-DT-ST DVD-RAM GSA-H22L

    7:07:15 PM #29 TRANSFER -24 File WriterStatus.cpp, Line 162
    Could not perform end of Disc-at-once

    7:07:22 PM #30 Phase 38 File dlgbrnst.cpp, Line 1762
    Burn process failed at 8x (11,080 KB/s)

    7:07:25 PM #31 Text 0 File SCSIPTICommands.cpp, Line 261
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    7:07:29 PM #32 Text 0 File Cdrdrv.cpp, Line 11185
    DriveLocker: UnLockVolume completed

    7:07:29 PM #33 Text 0 File SCSIPTICommands.cpp, Line 424
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    pls help me...pls
     
    Last edited by a moderator: Jun 25, 2007
  8. aileenc07

    aileenc07 Guest

    still no answer? pls help me..
     
  9. killalot

    killalot Active member

    Joined:
    Nov 7, 2002
    Messages:
    1,035
    Likes Received:
    0
    Trophy Points:
    66
    Have you tried some different software like suggested just to prove if it’s a problem with Nero or a problem with your computer set up?
     
  10. Rotary

    Rotary Senior member

    Joined:
    Apr 10, 2003
    Messages:
    8,353
    Likes Received:
    0
    Trophy Points:
    116
    try going in device manager and uninstallthe the cdrom device controllers...

    as i dont think the drive is being found ok? you need to find if you have DMA set or PIO ?

    reboot pc...

    [​IMG]
     
    Last edited: Jun 25, 2007
  11. aileenc07

    aileenc07 Guest

    yup, i tried cheetah dvd burner coz im afraid to use roxio coz the things that ive read bout it but i still can't burn, it says write error too...
     
  12. aileenc07

    aileenc07 Guest

    ok, i tried that and burn a data dvd, and it burned successfully at 8x, but just when im about to cry & celebrate, i inserted the dvd again to see if the data did got burned, but it doesn't show the title & it just says cd drive and when i double click it, its just blank... i tried inserting other dvd to test and the drive read it just fine... so pls what's wrong now?pls help me
     
  13. killalot

    killalot Active member

    Joined:
    Nov 7, 2002
    Messages:
    1,035
    Likes Received:
    0
    Trophy Points:
    66
    Have you tried a different brand of disk? Ritek G-05 is what I use like I said but you could have a bad batch this error is usually bad media
    There is on this site in the download section a program that checks blank disk’s and tells you who made them what speed they can be burned at etc
    Can’t remember what its called you see which one it is when you look in the download section try that and get back to us
    7:05:22 PM #23 SPTI -1135 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
     
  14. killalot

    killalot Active member

    Joined:
    Nov 7, 2002
    Messages:
    1,035
    Likes Received:
    0
    Trophy Points:
    66
  15. aileenc07

    aileenc07 Guest

    ok, i tried burning to another brand of disc, now i can't burn again... im really loosing hope...what am i doing wrong here? pls tell me...here's the log (again):

    Windows XP 5.1
    IA32
    WinAspi: -

    NT-SPTI used
    Nero Version: 7.9.6.0
    Internal Version: 7, 9, 6, 0
    (Nero Express)
    Recorder: <HL-DT-ST DVD-RAM GSA-H22L>Version: 1.02 - HA 1 TA 0 - 7.9.6.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-RAM GSA-H22L>Version: 1.02 - HA 1 TA 0 - 7.9.6.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H22L atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-RAM GSA-H22L E: CdRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 767MB (785904kB)
    Free physical memory: 399MB (408988kB)
    Memory in use : 47 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    27.6.2007
    ISO compilation
    7:08:09 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    7:08:09 PM #2 Text 0 File Isodoc.cpp, Line 6663
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    7:08:09 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
    First writeable address = 0 (0x00000000)

    7:08:09 PM #4 Text 0 File Burncd.cpp, Line 3508
    Turn on Disc-At-Once, using DVD media

    7:08:09 PM #5 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 1789663 (397:42.13, 3495MB)

    7:08:09 PM #6 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)

    7:08:09 PM #7 Text 0 File DlgWaitCD.cpp, Line 2964
    Recorder: HL-DT-ST DVD-RAM GSA-H22L, Media type: DVD+R
    Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 7

    7:08:09 PM #8 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    7:08:09 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1789664 (1789664) = #1789664/397:42.14
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1789664 blocks [E: HL-DT-ST DVD-RAM GSA-H22L]
    --------------------------------------------------------------

    7:08:09 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [E: HL-DT-ST DVD-RAM GSA-H22L] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3665231872, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 1789664 | 0 | 0x00
    1789664 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    7:08:09 PM #11 Text 0 File SCSIPTICommands.cpp, Line 215
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    7:08:10 PM #12 Text 0 File Burncd.cpp, Line 4294
    Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

    7:08:10 PM #13 Phase 24 File dlgbrnst.cpp, Line 1762
    Caching of files started

    7:08:37 PM #14 Text 0 File Burncd.cpp, Line 4413
    Cache writing successful.

    7:08:37 PM #15 Phase 25 File dlgbrnst.cpp, Line 1762
    Caching of files completed

    7:08:37 PM #16 Phase 36 File dlgbrnst.cpp, Line 1762
    Burn process started at 16x (22,160 KB/s)

    7:08:37 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    7:08:37 PM #18 Text 0 File Cdrdrv.cpp, Line 9872
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: MBIPG101
    Media type ID: R05
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
    23 54 37 13 02 50 6B 02 - 8C 63 15 15 0B 0B 08 08 #T7..Pk..c......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    7:08:37 PM #19 Text 0 File DVDR.cpp, Line 6553
    Drive: HL-DT-ST DVD-RAM GSA-H22L
    Book Type request [LG]: DVD-ROM
    Changing the Book Type was finished successfully, return code 0

    7:08:37 PM #20 CDR -1207 File DVDR.cpp, Line 6477
    Book Type automatically set to: DVD-ROM

    7:08:37 PM #21 SPTI -1066 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
    Buffer x082c8300: Len x648

    7:08:37 PM #22 Text 0 File DVDPlusRW.cpp, Line 675
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    7:08:37 PM #23 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 83836800

    7:13:08 PM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x80
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
    Buffer x092d0040: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    7:13:08 PM #25 CDR -1135 File Writer.cpp, Line 303
    Write error
    E: HL-DT-ST DVD-RAM GSA-H22L

    7:13:08 PM #26 Phase 127 File dlgbrnst.cpp, Line 1762
    Generating DVD high compatibility borders

    7:13:16 PM #27 Text 0 File DVDPlusRW.cpp, Line 935
    EndDAO: Last written address 0

    7:13:16 PM #28 Phase 129 File dlgbrnst.cpp, Line 1762
    Generating DVD borders completed successfully

    7:13:16 PM #29 Phase 38 File dlgbrnst.cpp, Line 1762
    Burn process failed at 16x (22,160 KB/s)

    7:13:22 PM #30 Text 0 File SCSIPTICommands.cpp, Line 261
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    7:13:26 PM #31 Text 0 File Cdrdrv.cpp, Line 11185
    DriveLocker: UnLockVolume completed

    7:13:26 PM #32 Text 0 File SCSIPTICommands.cpp, Line 424
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


    pls help me...pls..
     
    Last edited by a moderator: Jun 27, 2007
  16. aileenc07

    aileenc07 Guest

    i dl what u posted, this is the disk i used on the log i posted above:

    ----------------------------------------------------------------------------
    Unique Disc Identifier : [DVD+R:MBIPG101-R05-001]
    ----------------------------------------------------------------------------
    Disc & Book Type : [DVD+R] - [DVD+R]
    Manufacturer Name : [Moser Baer India Ltd.]
    Manufacturer ID : [MBIPG101]
    Media Type ID : [R05]
    Product Revision : [001]
    Blank Disc Capacity : [2,295,104 Sectors = 4.70 GB (4.38 GiB)]
    Recording Speeds : [1x-2.4x , 4x , 6x-8x , 6x-16x]
    ----------------------------------------------------------------------------
    [ DVD Identifier V5.0.1 - http://DVD.Identifier.CDfreaks.com ]
    ----------------------------------------------------------------------------

    i don't think its the dvd, maybe there's something wrong in the settings or configuration pls help me....
     
    Last edited by a moderator: Jun 27, 2007
  17. killalot

    killalot Active member

    Joined:
    Nov 7, 2002
    Messages:
    1,035
    Likes Received:
    0
    Trophy Points:
    66
    Them disk’s aren’t Ritek unless im missing something looks like you are using some Wright old shite disk’s
    Manufacturer Name: [Moser Baer India Ltd.]
    Get some decent disks
     
  18. aileenc07

    aileenc07 Guest

    I'm back, sorry if didn't replied this past few days coz i'm trying all of you suggestions just for these dvd to burn successfully, and it did!!!YAHOO!!! thank you so much ROTARY & KILLALOT for helping me,thank god for guys like u, i think the problems why my dvd can't burn are: poor media(ur right!!! killalot) ,my burner isn't set as master, and NERO 7(d*mn!!!)...yup, that's it...somehow it has something that won't let me burn successfully,i switch to the earlier version and i can burn w/out a problem...thank you so much...
     
  19. killalot

    killalot Active member

    Joined:
    Nov 7, 2002
    Messages:
    1,035
    Likes Received:
    0
    Trophy Points:
    66
    There is quite a few bugs problems what ever you want to call it still in Nero 7 you have to remember just because a program works fine on one persons computer doesn’t mean its going to work on yours no two people have the same set up so its always best try some different software first its try and error you have to eliminate one thing at a time golden rule though don’t try and save a few quid by using cheap shite unbranded media always use good disk’s glad you got it sorted .
     

Share This Page