1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

write error

Discussion in 'DVDR' started by Tcuddle, Apr 26, 2005.

  1. Tcuddle

    Tcuddle Member

    Joined:
    Apr 26, 2005
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    I so need help! I have a Lite-on DVDRW LDW-851S my firmware version is GSOP I have burned alot of dvds with no problems till now must have made about 20 costers in the last 3 days. Here is my nero burn log can somebody tell me what the problem is. I think it is the DVD_R Benq 8x disks I have been using, so yesterday I went out and bought fujifilm DVD-r 4x but am getting the same error, my burner manual says it is supposed to like fujifilm although my nero burning log disagrees. Thanks in advance

    Windows 98 4.90 (ME)
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 4:03:58 PM
    ahead WinASPI: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 PM
    Nero Version: 6.6.0.8 (Nero Express)
    Recorder: <LITE-ON DVDRW LDW-851S> Version: GS0P - HA 0 TA 0 - 6.6.0.8
    Adapter driver: <ESDI_506> HA 0
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: < ATAPI 44X CDROM >Version: 4.40 - HA 0 TA 1 - 6.6.0.8
    Adapter driver: <ESDI_506> HA 0
    LITE-ON DVDRW LDW-851S (Target 0, E:): Autoinsert Off, DMA On, Disconnect On, SyncDataXfer Off
    ATAPI 44X CDROM (Target 1, F:): Autoinsert Off, DMA On, Disconnect On, SyncDataXfer Off
    Excluded drive IDs:
    WriteBufferSize: 24117248 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 127MB (130544kB)
    Free physical memory: 0MB (772kB)
    Memory in use : 100 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.4.2005
    UDF/ISO compilation
    3:26:31 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    3:26:31 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    3:26:31 PM #3 Text 0 File Isodoc.cpp, Line 6172
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    3:26:31 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    3:26:31 PM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    3:26:31 PM #6 Text 0 File Writer.cpp, Line 122
    Writer LITE-ON DVDRW LDW-851S running

    3:26:31 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    3:26:31 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    3:26:32 PM #9 Text 0 File Burncd.cpp, Line 3153
    Turn on Disc-At-Once, using DVD media

    3:26:32 PM #10 Text 0 File DlgWaitCD.cpp, Line 259
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286143 (508:01.68, 4465MB)

    3:26:32 PM #11 Text 0 File DlgWaitCD.cpp, Line 271
    Write in overburning mode: NO (enabled: CD)

    3:26:32 PM #12 Text 0 File DlgWaitCD.cpp, Line 2316
    Recorder: LITE-ON DVDRW LDW-851S, Media type: DVD-R
    Disc Manufacturer: TYG01 -
    Disc Application Code: 64, Disc Physical Code: 193

    3:26:32 PM #13 Text 0 File DlgWaitCD.cpp, Line 433
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    3:26:32 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [LITE-ON DVDRW LDW-851S]
    --------------------------------------------------------------

    3:26:32 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [LITE-ON DVDRW LDW-851S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286144 | lead-out | 1 | 0x41 | 0x00

    3:26:32 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    3:26:32 PM #17 Text 0 File Burncd.cpp, Line 4040
    Cache writing successful.

    3:26:32 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    3:26:32 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2x (2,770 KB/s)

    3:26:32 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    3:26:32 PM #21 Text 0 File DVDR.cpp, Line 2194
    Recording mode: Sequential Recording Mode

    3:26:32 PM #22 Text 0 File Mmc.cpp, Line 21235
    Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

    3:26:32 PM #23 Text 0 File DVDR.cpp, Line 2340
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    3:26:32 PM #24 Text 0 File Cdrdrv.cpp, Line 8430
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    3:26:52 PM #25 Text 0 File Cdrdrv.cpp, Line 1287
    15:26:52.660 - LITE-ON DVDRW LDW-851S\H0 T0 : Queue again later

    3:53:54 PM #26 SCSI -1135 File Cdrdrv.cpp, Line 1435
    SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02C40000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x20 0x81 0x60 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    3:53:54 PM #27 CDR -1135 File Writer.cpp, Line 311
    Write error

    3:53:54 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    3:53:55 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    3:53:55 PM #30 Text 0 File DVDR.cpp, Line 2603
    EndDAO: Last written address was 2130271

    3:54:18 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 5:00:00 PM
    File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/03/2002 10:55:38 AM
    File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 21/04/2005 9:43:36 PM
    File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 21/04/2005 9:43:36 PM
    File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 21/04/2005 9:43:36 PM
    File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 5:00:00 PM
    File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 5:00:00 PM
    File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 5:00:00 PM
    File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 5:00:00 PM
    File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 5:00:00 PM
    File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 5:00:00 PM
    File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 5:00:00 PM (Adapter driver for rec)

    Registry Keys:

     
  2. B2D327

    B2D327 Regular member

    Joined:
    Apr 11, 2005
    Messages:
    197
    Likes Received:
    0
    Trophy Points:
    26
    First thing I noticed was 127mb physical memory. You might want to think about a memory upgrade and also make sure you have no running processes in the background like screensavers, wallpaper, etc.
     
  3. Tcuddle

    Tcuddle Member

    Joined:
    Apr 26, 2005
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    Thanks I am aware that I am running on min resources I have no screensavers running everything including the internet is shut down for the burning process. Ram is high on my shopping list. Since I have been having problems I am wondering if it has anything to do with firmware? all the zeros in my nero log (I think means not able to read disks)I am not sure I am a newbie at this must of burned a 100 dvds before all of this happened. I have defraged and even formated my puter for a fresh start I have also been using "clean ram" before each burn. I appreciate the feed back!
     
  4. saugmon

    saugmon Senior member

    Joined:
    Oct 9, 2004
    Messages:
    6,064
    Likes Received:
    1
    Trophy Points:
    116
    Looks like your burning about 25 mins at 2x or so until it errors out.Ty go1's are some of the best media. Since it is actually burning,that should rule out firmware update needed.

    Here's something that sticks out: [bold]Last address to be written: 2286143 (508:01.68, 4465MB)[/bold]
    That is pushing it.

    Reduce your backup target,which ever programs you use to rip and compress. I use dvd shrink,and keep all my backups at 4360 mbs. Let me know which programs you have.
     
  5. Tcuddle

    Tcuddle Member

    Joined:
    Apr 26, 2005
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    I use DVD Shrink 3.2 excellent program and when I have a difficult dvd I use DVD Decrypter. What do I change in DVD shrink? I took a look at preferences and it is set at 4464kb and in file I/O should I have (read 32kb blocks default is 64kb)checked marked? all of dvd shrink is set at defaults have never messed with it. Thanks you for the time you have spent helping me I am at a loss!!!
     
  6. saugmon

    saugmon Senior member

    Joined:
    Oct 9, 2004
    Messages:
    6,064
    Likes Received:
    1
    Trophy Points:
    116
    OK, You have dvd shrink. Here's what you need to do.

    Open up dvd shrink
    Edit
    Preferences
    Click on the dvd-5,and scroll till it is custom
    Next to it,enter 4360.
    OK.

    That's the only thing I changed from dvd shrink's default settings.

    This reduced backup target may take care of that issue. It usually prevents a lot of issues,that's why I keep mine there.
     
  7. Tcuddle

    Tcuddle Member

    Joined:
    Apr 26, 2005
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    Good news I am burning DVD's again but now I am getting the odd one that stalls while it plays. Could this just be the brand of disk or maybe even the DVD player ran a disk cleaner through my burner and dvd player. The burner seems to be working fine I installed another stick of 128ram and all my backups are being saved at 4360mbs

    Thanks Tracy
     
  8. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    31,683
    Likes Received:
    1
    Trophy Points:
    96
    ...more Nero log please, the clues are probably in there (even if burns were 100% successful)

    :)
     
  9. Tcuddle

    Tcuddle Member

    Joined:
    Apr 26, 2005
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    I thought I had it figured out I went out and bought Memorex thinking it would give me a better burn I am completley clueless can anybody see anything in this nero burn log that might help me figure out my write errors. Thanks

    Windows 98 4.90 (ME)
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 4:03:58 PM
    ahead WinASPI: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 PM
    Nero Version: 6.6.0.8 (Nero Express)
    Recorder: <LITE-ON DVDRW LDW-851S> Version: GS0P - HA 0 TA 0 - 6.6.0.8
    Adapter driver: <ESDI_506> HA 0
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: < ATAPI 44X CDROM >Version: 4.40 - HA 0 TA 1 - 6.6.0.8
    Adapter driver: <ESDI_506> HA 0
    LITE-ON DVDRW LDW-851S (Target 0, E:): Autoinsert Off, DMA On, Disconnect On, SyncDataXfer Off
    ATAPI 44X CDROM (Target 1, F:): Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ?
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 255MB (261616kB)
    Free physical memory: 0MB (40kB)
    Memory in use : 74 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    5.5.2005
    UDF/ISO compilation
    9:28:02 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    9:28:02 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    9:28:02 AM #3 Text 0 File Isodoc.cpp, Line 6172
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    9:28:02 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    9:28:02 AM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    9:28:02 AM #6 Text 0 File Writer.cpp, Line 122
    Writer LITE-ON DVDRW LDW-851S running

    9:28:02 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    9:28:02 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    9:28:02 AM #9 Text 0 File Burncd.cpp, Line 3153
    Turn on Disc-At-Once, using DVD media

    9:28:03 AM #10 Text 0 File DlgWaitCD.cpp, Line 259
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2232959 (496:12.59, 4361MB)

    9:28:03 AM #11 Text 0 File DlgWaitCD.cpp, Line 271
    Write in overburning mode: NO (enabled: CD)

    9:28:03 AM #12 Text 0 File DlgWaitCD.cpp, Line 2316
    Recorder: LITE-ON DVDRW LDW-851S, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AE1
    Disc Application Code: 64, Disc Physical Code: 193

    9:28:03 AM #13 Text 0 File DlgWaitCD.cpp, Line 433
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:28:03 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2232960 (2232960) = #2232960/496:12.60
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2232960 blocks [LITE-ON DVDRW LDW-851S]
    --------------------------------------------------------------

    9:28:03 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [LITE-ON DVDRW LDW-851S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4573102080, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2232960 | lead-out | 1 | 0x41 | 0x00

    9:28:03 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    9:28:03 AM #17 Text 0 File Burncd.cpp, Line 4040
    Cache writing successful.

    9:28:03 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    9:28:03 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    9:28:03 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    9:28:03 AM #21 Text 0 File DVDR.cpp, Line 2194
    Recording mode: Sequential Recording Mode

    9:28:03 AM #22 Text 0 File Mmc.cpp, Line 21235
    Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

    9:28:03 AM #23 Text 0 File DVDR.cpp, Line 2340
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:28:03 AM #24 Text 0 File Cdrdrv.cpp, Line 8430
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    9:28:30 AM #25 Text 0 File Cdrdrv.cpp, Line 1287
    09:28:30.150 - LITE-ON DVDRW LDW-851S\H0 T0 : Queue again later

    9:31:13 AM #26 SCSI -1135 File Cdrdrv.cpp, Line 1435
    SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02C80000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x01 0xFC 0x60 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    9:31:13 AM #27 CDR -1135 File Writer.cpp, Line 311
    Write error

    9:31:13 AM #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    9:31:14 AM #29 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    9:31:14 AM #30 Text 0 File DVDR.cpp, Line 2603
    EndDAO: Last written address was 130143

    9:31:14 AM #31 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 5:00:00 PM
    File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/03/2002 10:55:38 AM
    File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 21/04/2005 9:43:36 PM
    File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 21/04/2005 9:43:36 PM
    File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 21/04/2005 9:43:36 PM
    File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 5:00:00 PM
    File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 5:00:00 PM
    File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 5:00:00 PM
    File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 5:00:00 PM
    File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 5:00:00 PM
    File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 5:00:00 PM
    File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 5:00:00 PM (Adapter driver for rec)

    Registry Keys:
     
  10. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    31,683
    Likes Received:
    1
    Trophy Points:
    96
    - v bad news, you've run out of memory and you're in virtual memory territory, ie your hard disc is swapping (thrashing too much)

    - if i had a penny for every failed/problematic burn due to memorex/cmc i would be very rich i'm afraid :)

    - anyone who works at memorex should be ashamed of all the bad press their sh*t media gets !. and it should all be removed from sale.
     
    Last edited: May 5, 2005
  11. Tcuddle

    Tcuddle Member

    Joined:
    Apr 26, 2005
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    How do I fix this? sorry I am kind of teaching myself computer stuff the hard way. I have gone into my control panel and system properties and performance and there I have a tab called virtual memory for some reason The "let me specify" was chossen I have now changed it to let windows manage my virtual memory settings will this help? I have fujifilm dvd-r's to try as well as benq dvd-r's good thing I only bought a small 5 pk to try of the memorex!! Thanks

    Quote:
    you've run out of memory and you're in virtual memory territory, ie your hard disc is swapping (thrashing too much)
     
  12. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    31,683
    Likes Received:
    1
    Trophy Points:
    96
    without buying more memory, you'll have to close more background stuff down to free up more memory.
     
  13. squizzle

    squizzle Active member

    Joined:
    Apr 19, 2004
    Messages:
    2,867
    Likes Received:
    0
    Trophy Points:
    66
    I agree, you're going to have to get rid of some of those running programs or get more memory, but I also noticed that you are getting a Key Media Error. Try different media, maybe a firmware update on your burner.
     
  14. Tcuddle

    Tcuddle Member

    Joined:
    Apr 26, 2005
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    Everything is closed down even went to msconfig ans shut down stuff in start up,do not use a screen saver for burning purposes. Good news though mothers day was yesterday and my wonderful daughter bought me a new dvd burner tried it last night copied 3 movies everyone of them turned out beautifully yeah!!! I am back in action again. Thanks every one for the good advice.
     

Share This Page