1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Xbox 360 Back Up Error NCAA 13 Not Supported Disk Clean Error

Discussion in 'Xbox 360 - Modding & Hacking' started by bjsisson11, Sep 9, 2012.

  1. bjsisson11

    bjsisson11 Member

    Joined:
    Sep 9, 2012
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    So I have been trying to back up NCAA 13 and have made about 6 coasters so far. I have a Ihas 124B with the most current Firmware, my drive in my box is a Philips/Lite-on DG-16D2S with LT 3.0 and i use verbs MKM-003-00. Here is the log for my most current burn and with these settings it shows the logo on the dashboard but if you try to play it says its dirty and needs to be cleaned (side note is I took my box apart and did clean the lens) and so i tried to copy it to the HDD and it copy 100% but if you try to play it says not supported. PLEASE HELP BEFORE I LOOSE MY MIND, I have followed all the settings (I Think) so the only thing i can think of is maybe the rip is bad



    I 09:55:23 ImgBurn Version 2.5.7.0 started!
    I 09:55:23 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3)
    I 09:55:23 Total Physical Memory: 1,047,024 KB - Available: 305,380 KB
    I 09:55:23 Initialising SPTI...
    I 09:55:23 Searching for SCSI / ATAPI devices...
    I 09:55:23 -> Drive 1 - Info: ATAPI iHAS124 B AL0S (F:) (ATA)
    I 09:55:24 -> Drive 2 - Info: HL-DT-ST DVDRRW GSA-H20L S853-06 (E:) (ATA)
    I 09:55:24 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (L:) (SCSI)
    I 09:55:24 -> Drive 4 - Info: ROXIO DVD-ROM EMULATOR 2.00 (K:) (SCSI)
    I 09:55:24 Found 1 DVD-ROM, 2 DVD±RW/RAMs and 1 BD-ROM/HD DVD-ROM!
    I 10:02:14 Operation Started!
    I 10:02:14 Source File: D:\My Document\My Files\Xbox\Ncaa Football 13 USA XBOX360-SPARE\sp-nf13.dvd
    I 10:02:14 Source File Sectors: 4,267,015 (MODE1/2048)
    I 10:02:14 Source File Size: 8,738,846,720 bytes
    I 10:02:14 Source File Volume Identifier: DVD_ROM
    I 10:02:14 Source File Volume Set Identifier: fc02c000MS UDFBridge
    I 10:02:14 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
    I 10:02:14 Source File Implementation Identifier: Microsoft CDIMAGE UDF
    I 10:02:14 Source File File System(s): ISO9660, UDF (1.50)
    I 10:02:14 Destination Device: [2:0:0] ATAPI iHAS124 B AL0S (F:) (ATA)
    I 10:02:14 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
    I 10:02:14 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x
    I 10:02:14 Destination Media Sectors: 4,267,040
    I 10:02:14 Write Mode: DVD
    I 10:02:14 Write Type: DAO
    I 10:02:14 Write Speed: 4x
    I 10:02:14 DVD+R DL Reserve Track: No
    I 10:02:14 Link Size: Auto
    I 10:02:14 Lock Volume: Yes
    I 10:02:14 Test Mode: No
    I 10:02:14 OPC: Yes
    I 10:02:14 BURN-Proof: Enabled
    I 10:02:14 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
    I 10:02:14 Book Type Setting: DVD-ROM
    I 10:02:14 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes
    I 10:02:45 Optimal L0 Data Zone Capacity: 2,133,520
    I 10:02:45 Optimal L0 Data Zone Method: Copied From Original Disc
    I 10:02:45 Set L0 Data Zone Capacity Succeeded!
    I 10:02:46 Filling Buffer... (20 MB)
    I 10:02:46 Writing LeadIn...
    I 10:02:49 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
    I 10:02:49 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
    I 10:02:49 Writing Layer 0... (LBA: 0 - 2133519)
    I 10:16:01 Writing Layer 1... (LBA: 2133520 - 4267014)
    I 10:29:15 Synchronising Cache...
    I 10:29:19 Closing Track...
    I 10:29:20 Finalising Disc...
    I 10:29:53 Exporting Graph Data...
    I 10:29:53 Graph Data File: C:\Documents and Settings\Joseph\Application Data\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_SUNDAY-SEPTEMBER-09-2012_10-02_AM_MKM-003-00_4x.ibg
    I 10:29:53 Export Successfully Completed!
    I 10:29:53 Operation Successfully Completed! - Duration: 00:27:39
    I 10:29:53 Average Write Rate: 5,384 KB/s (3.9x) - Maximum Write Rate: 5,645 KB/s (4.1x)
     
  2. peluynati

    peluynati Regular member

    Joined:
    Nov 18, 2009
    Messages:
    1,841
    Likes Received:
    0
    Trophy Points:
    46
    what did abgx say when you ran the iso through it?
     
  3. RIARA

    RIARA Regular member

    Joined:
    Nov 12, 2008
    Messages:
    315
    Likes Received:
    1
    Trophy Points:
    28
    what are the results with kprobe?
     
  4. chriswhit

    chriswhit Regular member

    Joined:
    Sep 27, 2010
    Messages:
    210
    Likes Received:
    0
    Trophy Points:
    26
    did you set the right layer brake?
     
  5. coorva

    coorva Regular member

    Joined:
    Apr 17, 2005
    Messages:
    1,239
    Likes Received:
    0
    Trophy Points:
    46
    What type of disc's are you using??I see you burnt it at 4x speed,which I believe you're using memorex with the wrong settings,,and did you put it through agbx before you burnt it???.very important steps
     
    Last edited: Sep 11, 2012
  6. RIARA

    RIARA Regular member

    Joined:
    Nov 12, 2008
    Messages:
    315
    Likes Received:
    1
    Trophy Points:
    28
    Looks like your layerbreak is right and you are using verbs. in imgburn, uncheck opc and burnproof and change your buffer to 512.

    in eeprom try enabling all options and clear your opc then power cycle your drive. then go ahead and burn again and check it with kprobe.

    those are the setting i use with mkm-003 and i havnt had a coaster yet.
     
  7. DMiller83

    DMiller83 Member

    Joined:
    Sep 28, 2012
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    Has anyone have a successful burn with NCAA Football 13? This my first time trying to burn games that I've ripped. Had no problems burning XGD2, or XGD3 from download. I have a Via 6421 Pci card, Ck3 mini, and a flashed Benq drive with LT3.0 and 0800 firmware, and I burned with a pre-flashed Ihas524 B drive. I keep getting unsupported disk error. How do I know I am ripping the game right? What should I do to backstep my mistakes in order to get this game to work.
     

Share This Page