1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Xbox 360 slim Kamikazee hack

Discussion in 'Xbox 360 - Modding & Hacking' started by zpaitsel, Oct 11, 2012.

  1. zpaitsel

    zpaitsel Regular member

    Joined:
    Jul 29, 2011
    Messages:
    110
    Likes Received:
    0
    Trophy Points:
    26
    Let me first start out with I have a liteon 16-4ds

    I have dumped all the information off the drive and attempted a kamikazee hack.

    I got the beeps and the status went to 0x00 then I tried to read the drive and now am getting an error. I am very familiar with the phat boxes and just starting to mess with some of the slims so I dont need my hand held just need to know what to do from here. My jf log is below. any help would be greatly appreciated. It beeped as it unlocked and everything and now it will intro but says 0xff?

    Im a little stuck what to do from here, the drive does re-intro just can't read, write, or flash / ALSO WHEN I RE-INTRO I GET A RETURN TO NORMAL FROM MRA HACK POSITION MESSAGE??

    ================================================================================

    Sending Vendor Outro to port 0x0000

    Drive is Slim Lite-On..



    Key found in KeyDB at record (9 - new black slim from shea)

    Key is: xxxxxxx(blanked out on putpose)

    Key has been tested and verified, thanks C4eva !

    Sending Vendor Intro to port 0x0000

    Status 0x51

    Re-sending Vendor Intro:

    ..................

    Serial flash found with Status 0x72



    Sending Device ID request to port 0x0000

    Spi Status: 0x8C

    Manufacturer ID: 0xEF

    Device ID: 0x11

    Flash Name: Winbond/NEX(W25P20/NX25P20)

    Flash Size: 262144 bytes



    Sending Spi UnLock request to Port 0x0000

    .....................................................................................................................................................................................................................................................................................................................................................................................................................................................

    Spi Status: 0x00



    Getting Status from port 0x0000

    Serial flash found with Status 0x72

    Reading Drive Key.

    ............

    Stage 1 failed



    Authorisation Failed!



    Getting Status from port 0x0000

    Invalid Status 0x80
     
    Last edited: Oct 11, 2012
  2. peluynati

    peluynati Regular member

    Joined:
    Nov 18, 2009
    Messages:
    1,841
    Likes Received:
    0
    Trophy Points:
    46
    according to that the spi is still locked!
     
  3. Modking30

    Modking30 Regular member

    Joined:
    Feb 16, 2010
    Messages:
    3,169
    Likes Received:
    0
    Trophy Points:
    46
    You should just buy an aftermarket PCB and do it right. or buy an xkey
     

Share This Page