1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

xbox hdd

Discussion in 'Xbox - Hardware mods' started by sk8r561, Sep 13, 2007.

  1. sk8r561

    sk8r561 Member

    Joined:
    Sep 13, 2007
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    can i use a differant hdd that i got from the store without a mod chip becuase i put a new hdd in modded it with unleash x and it gives me error code 5 so can somebody please help me. i really do not feal like buying a mod chip
     
  2. JBDizzle

    JBDizzle Member

    Joined:
    Sep 10, 2007
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    11
    Yes and No. The HDD has to be signed to the xbox in order for it to work. The only way to get the HDD signed is either by installing a Modchip and signing it with config magic or doing the Hotswap method. Good Luck:)
     
    Last edited: Sep 13, 2007
  3. locobrown

    locobrown Regular member

    Joined:
    Apr 4, 2007
    Messages:
    653
    Likes Received:
    1
    Trophy Points:
    26
    Not entirely true. You dont need a mod chip to upgrade your hard drive if you dont want to, softmod it. The only thing you need it your EEPROM. Follow this tutorial. http://forums.afterdawn.com/thread_view.cfm/533828. You get error 5 because the drive is not locked. Just replace the stock hard drive back into the xbox and backup your eeprom onto your pc. Don't hotswap nor unplug anything while the xbox is on. You only hotswap if you don't have a eeprom backup on your pc because the xbox no longer boots a dashboard. You don't need to hotswap its erroneous advice, you are only upgrading.
     
    Last edited: Sep 15, 2007
  4. chunkhead

    chunkhead Regular member

    Joined:
    Oct 20, 2006
    Messages:
    2,753
    Likes Received:
    0
    Trophy Points:
    46
    True, ignore JBDizzles advice, it's incorrect!
     
  5. sk8r561

    sk8r561 Member

    Joined:
    Sep 13, 2007
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    my stock hard drive does not work any more because some of the ide prongs on the hard drive got broken off
     
  6. locobrown

    locobrown Regular member

    Joined:
    Apr 4, 2007
    Messages:
    653
    Likes Received:
    1
    Trophy Points:
    26
    Please hoping, did you backup your eeprom? Before or after a softmod you must backup that important archive. If you didn’t you will need to build an eeprom reader/writer. Click on chuckhead's sig.
     
    Last edited: Sep 17, 2007
  7. sk8r561

    sk8r561 Member

    Joined:
    Sep 13, 2007
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    i did not get the EEPROM so i will go there
     
  8. locobrown

    locobrown Regular member

    Joined:
    Apr 4, 2007
    Messages:
    653
    Likes Received:
    1
    Trophy Points:
    26
    Or just get a mod chip, its less hasle though.
     
  9. chunkhead

    chunkhead Regular member

    Joined:
    Oct 20, 2006
    Messages:
    2,753
    Likes Received:
    0
    Trophy Points:
    46
    I make the eeprom readers, so I'm biased, but they are SOOOOOO easy!
     

Share This Page