You probably messed up your dashboard. Make an evox boot disk and boot your Xbox with your chip on. You'll be able to ftp to it.. fix the...
Yes it will... the serial number is stored on the EEPROM chip on the motherboard.
Yeah, it will do that..
What version is your Xbox?
Once you've got hold of a drive, just swap it.. no installation, no setup!
Never seen this problem before.. check that the resistors around the power (yellow) cable are intact..
Yeah if you don't see the Xenium OS, the chip isn't booting... recheck your D0 point.
There is no COMPLETELY 1.6 solderless solution available for Xecuter's yet. There is the "Xapter" but it requires some soldering at the bottom of...
http://www.chefelf.com/xbox/networking.php
I guess I did go overboard... Do the programmers work with the 2.6's?
Try this http://www.xbox-scene.com/articles/lock-hdd.php
Did you see the Xenium OS? If you didn't, then the chip isn't installed properly. Recheck your D0 point.
Make sure you're using a crossover cable.
If it works, it's good :)
http://www.teamxecuter.com/xapter/
www.modder.ca/guides.php Check out "Networking the Xbox".
If it's a 1.6, don't flash a 4983! It'll render your chip useless! Use the M8+ bios (1.6 version-there's 2). And make sure you create a 1MB...
I have been playing on Live with a large drive, no problems. I believe in the "marriage" theory, so as long as you signed up with the drive...
There's no recovery with Aladdin advance or any 3rd gen chips for that matter. 4th gen chips like Xecuter3 and Xenium ICE are idiot-proof.
Separate names with a comma.
