Check error code here: http://www.edepot.com/forums/viewtopic.php?f=9&t=955&start=0&st=0&sk=t&sd=a The issue may be related to a bad drive or...
Good luck with the reball -- get some good solder wick and a magnifying glass ;p...
537'C (1000'f) is too hot, if held on long enough it will damage parts, and may create toxic fumes. Generally: 300'C For bonding BGA chips...
Reball (difficult even with tools): remove the chips from PCB clean pcb pads and chips (tricky) prep chips with flux replace the solder...
In progress next week, but note I am going to try a slightly different approach than the cook-cool-and-flip method. I would recommend a...
Hello colinjest, there are countless formulations for solder, and most pastes require refrigeration to increase their shelf life prior to...
Does anyone know the ideal voltage levels and initial current draw for the 20G PS3 power supply? During brief Power On I read: 12.04v (pegs:...
atrac88, This lurker has observed a few dead units with the BGA chips interconnects warped by the thermal stress. Some of the chips will deform...
Separate names with a comma.
