I don't know about the DVD key. As for scraping, you will need a magnifying glass (I used 4x) and some Q-tips and rubbing alcohol (I used 92%) but...
Do you have a pic of the J2D2.1 point that is messed up? Did you rip the pad off? I ripped mine off on accident and i was able to fix it by...
@ Petries - I would recommend solid wire 20-24 gauge if you can find it. I have done it with braided wire and solid wire, the first time was with...
@Pheenoh - I did not see anywhere what type of box you are using, Is it Arcade 256mb or 512mb? or a 16mb nand. nandpro tells you as soon as you...
you need to compare the xbr you read from the box to the xbr you injected the kv and config into not the the original xbr you downloaded. If you...
not sure if you know this but xell wont boot with HDMI, i reccomend booting with a component cable cause the regular RCA(yellow, red white) will...
I would wait to remove the lpt cable until you know for sure that the system boots up. It will boot fine with the lpt cables still attached. But...
I couldn't wait any longer, so i scrapped off the trace going to the J2D2.1 point, and solder to that and where the pad was and it is working...
I am not able to get any error codes, and since my last post the box no longer goes into 3 green lights or the D1, D4 red blinking lights. I don't...
I am having an issue booting up my xbox, when turning it on I get just the green power light. Occasionally D1 and D4 blink red as well, but there...
Separate names with a comma.
