After going and buying a new T8 Torx bit since I had lost mine, I took it back apart and taped every connection. I had previously done this but it...
No I didn't have any bad block at all according to nandpro
I didn't dump the whole nand because I didn't want to wait out the 18-24 hours 3 or 4 times so i only dumped the first 1000 blocks which was what...
No I installed in the other spot on the bottom of the motherboard instead of to the rf board
I installed the JTAG hack and XBReboot on my Jasper 512mb 360 and I have been having some issues with it. First off the DB1F1 connection is the...
Thank you so much for all the help i was given, sorry I asked so many questions. I now have a working jtagged box! I am stoked!!!
Ok I have extracted rawkv.bin and config.bin from all of my dumps and compared them in Total Commander and they are all identical. So since I have...
5th dump still unsuccessful. Checked soldering and it's good. Trying different LPT cable. What size should kv.bin and config.bin be for 512...
Yes I did put the "1 1" in it. The command I used was "C:\Nandpro20b\nandpro.exe orig.bin: -r512 kv.bin 1 1" Dumping the 4th dump now....
I am down to one difference now. I don't understand hex whatsoever either but the difference is: 1572738: FF FF FF FF FF FF FF FF ÿÿÿÿÿÿÿÿ...
Ok I dumped 2 nand images and there are 23 differences. I know it says to get to identical dumps but is there anyway to tell if my kv.bin read is...
I have looked through many guides and used a different one for the wiring of the lpt and jtag but for reading the nand and everything else i have...
After doing some more research I see that I can extract the keyvault from orig.bin without xell. Do I even need to flash xell or get my cpu key to...
Ok, thanks. Do I do this in the order you posted them without flashing xell? I thought I had to flash xell to get my key? The reading of the nand...
Hi guys, I have a few questions. I am completely new to all of this but i have a relatively decent understanding of it. My problem is, I am trying...
Separate names with a comma.
