my computer (a dell) would recognize the drive but I wasn't able to do anything with the drive. If a CD or DVD was in the drive the computer would tell me that there was nothing in the drive. The button on the drive wouldn't work to open the door to the drive and the there was no way I could open the drive except by putting a paper clip in the little hole just below the tray that come out to open the drive so I could get the disk back. Does anybody out there know anything about this problem? i use DVD Shrink I put a DVD movie in the DVD drive. I then clicked on open disk on DVD Shrink. After that a meesage popped up saying that the region needs to be set. It gave me the only choice of region 1 ( the USA). All the other regions were grayed out. After I clicked on "okay" DVD Shrink said it could not read the disc. So then I went to go eject the disc, by pressing the eject button on the side of the DVD drive, but it would not eject the disk. I noticed that the green light on the drive was on and staying lite. In the owner's manual this means that the drive it busy. Since this is a replacement burner from sony, I am not sure if I can return it. The first one stopped working it was not being read by my computer I have already tried turning off the drive and disconnecting the USB. Also, unplugging the power cord and the USB from the drive for ten secondsand then reconnecting. I do not keep it connected to my computer when I am not using it per instructions from sony. I noticed that some one else had this problem a while back but I am not aware if the advise given helped them. It did not solve my issue Thank you
DriveCheck Diagnostic Please note the following: The test may take up to 20 minutes to run. Run this utility ONLY if directed by technical support to do so. Ensure you have the latest firmware upgrade on the drive. When running the test on a DVD-RW drive, please ensure you are using media that is on the media compatibility list. Sony DriveCheck Diagnostic Tool There is a firmware Upgrade Version SS25. It is for reliability improvements with 8cm DVD-R DL and compatibility with Windows Vista. Sounds like the same problem. I would go back to Sony.
I was contacted by sony and they had me do the updating the drive now opens but will still not let me burn a disk it tells me that I have the wrong type of disk in
Did they have you run the DriveCheck Diagnostic Tool? What type and brand disc are you using? What software are you tring to burn with? Post a burn log if you have one. Edit out serial number for Nero.
I had been using the dvd-r since I got the drive in March. I couldn't run the test. the door opens and ask me to put in a disk even when there is one in there. Contacted sony and was told to try dvd+r so I did and still get the same error message. I am using nerosmart. I am not sure how to get to my burn log but if I can I will post it. I have to call sony again in the morning Thank you
Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM Nero Version: 6.6.0.12 Internal Version: 6, 6, 0, 12d Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <HL-DT-ST RW/DVD GCC-4480B>Version: C104 - HA 1 TA 0 - 6.6.0.12 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST RW/DVD GCC-4480B D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 509MB (522220kB) Free physical memory: 124MB (127668kB) Memory in use : 75 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 22.2.2007 Copy disc to image 11:32:11 AM #1 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 11:32:11 AM #2 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc blank or invalid. Need valid original disc. (Medium in drive: Unknown. Medium required by compilation: CD.) 11:32:11 AM #3 Phase 23 File dlgbrnst.cpp, Line 1832 Reading disc aborted Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/22/2005 9:47:25 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Bobbie Jo 1A22-0206-0530-1610-5715-1441* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM Nero Version: 6.6.0.12 Internal Version: 6, 6, 0, 12d Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <HL-DT-ST RW/DVD GCC-4480B>Version: C104 - HA 1 TA 0 - 6.6.0.12 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST RW/DVD GCC-4480B D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 509MB (522220kB) Free physical memory: 155MB (159028kB) Memory in use : 69 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 22.2.2007 CD Copy 11:33:21 AM #1 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 11:33:21 AM #2 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc blank or invalid. Need valid original disc. (Medium in drive: Unknown. Medium required by compilation: CD.) 11:33:21 AM #3 Phase 23 File dlgbrnst.cpp, Line 1832 Reading disc aborted Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/22/2005 9:47:25 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Bobbie Jo 1A22-0206-0530-1610-5715-1441* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM Nero Version: 6.6.0.12 Internal Version: 6, 6, 0, 12d Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <HL-DT-ST RW/DVD GCC-4480B>Version: C104 - HA 1 TA 0 - 6.6.0.12 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST RW/DVD GCC-4480B D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 509MB (522220kB) Free physical memory: 150MB (154588kB) Memory in use : 70 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 22.2.2007 Copy disc to image 11:33:49 AM #1 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 11:33:49 AM #2 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc blank or invalid. Need valid original disc. (Medium in drive: Unknown. Medium required by compilation: CD.) 11:33:49 AM #3 Phase 23 File dlgbrnst.cpp, Line 1832 Reading disc aborted Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/22/2005 9:47:25 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Bobbie Jo 1A22-0206-0530-1610-5715-1441* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM Nero Version: 6.6.0.12 Internal Version: 6, 6, 0, 12d (Nero Express) Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <HL-DT-ST RW/DVD GCC-4480B>Version: C104 - HA 1 TA 0 - 6.6.0.12 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST RW/DVD GCC-4480B D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 509MB (522220kB) Free physical memory: 136MB (139280kB) Memory in use : 73 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 22.2.2007 DVD-Copy on the fly 11:36:00 AM #1 Text 0 File Reader.cpp, Line 127 Reader running 11:36:00 AM #2 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc Last LBA on layer 0 = 1885887 / 0x1CC6BF / 3683MB S01 T01 Con 0x14 Start 0 Len 3771763 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 11:36:00 AM #3 CDCOPY -33 File DVDCopy.cpp, Line 319 This DVD is copy-protected and cannot be read Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/22/2005 9:47:25 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Bobbie Jo 1A22-0206-0530-1610-5715-1441* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM Nero Version: 6.6.0.12 Internal Version: 6, 6, 0, 12d (Nero Express) Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <HL-DT-ST RW/DVD GCC-4480B>Version: C104 - HA 1 TA 0 - 6.6.0.12 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST RW/DVD GCC-4480B D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 509MB (522220kB) Free physical memory: 134MB (137828kB) Memory in use : 73 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.2.2007 DVD-Copy over Image 12:15:47 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 12:15:47 PM #2 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 3920320 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 12:15:47 PM #3 CDCOPY -33 File DVDCopy.cpp, Line 319 This DVD is copy-protected and cannot be read Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/22/2005 9:47:25 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Bobbie Jo 1A22-0206-0530-1610-5715-1441* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM Nero Version: 6.6.0.12 Internal Version: 6, 6, 0, 12d Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <HL-DT-ST RW/DVD GCC-4480B>Version: C104 - HA 1 TA 0 - 6.6.0.12 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST RW/DVD GCC-4480B D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 509MB (522220kB) Free physical memory: 116MB (119132kB) Memory in use : 77 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.2.2007 Copy disc to image 12:23:03 PM #1 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 12:23:03 PM #2 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc blank or invalid. Need valid original disc. (Medium in drive: Unknown. Medium required by compilation: CD.) 12:23:03 PM #3 Phase 23 File dlgbrnst.cpp, Line 1832 Reading disc aborted Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/22/2005 9:47:25 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Bobbie Jo 1A22-0206-0530-1610-5715-1441* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM Nero Version: 6.6.0.12 Internal Version: 6, 6, 0, 12d (Nero Express) Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <HL-DT-ST RW/DVD GCC-4480B>Version: C104 - HA 1 TA 0 - 6.6.0.12 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST RW/DVD GCC-4480B D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 509MB (522220kB) Free physical memory: 222MB (228152kB) Memory in use : 56 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.2.2007 Copy disc to image 5:55:45 PM #1 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 5:55:45 PM #2 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the original disc. (Medium in drive: Unknown. Medium required by compilation: CD.) 5:55:45 PM #3 Phase 23 File dlgbrnst.cpp, Line 1832 Reading disc aborted Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/22/2005 9:47:25 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Bobbie Jo 1A22-0206-0530-1610-5715-1441* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM Nero Version: 6.6.0.12 Internal Version: 6, 6, 0, 12d (Nero Express) Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <HL-DT-ST RW/DVD GCC-4480B>Version: C104 - HA 1 TA 0 - 6.6.0.12 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST RW/DVD GCC-4480B D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 509MB (522220kB) Free physical memory: 177MB (181936kB) Memory in use : 65 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.2.2007 Copy disc to image 5:57:34 PM #1 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 5:57:34 PM #2 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc blank or invalid. Need valid original disc. (Medium in drive: Unknown. Medium required by compilation: CD.) 5:57:34 PM #3 Phase 23 File dlgbrnst.cpp, Line 1832 Reading disc aborted Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/22/2005 9:47:25 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Bobbie Jo 1A22-0206-0530-1610-5715-1441* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM Nero Version: 6.6.0.12 Internal Version: 6, 6, 0, 12d (Nero Express) Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <HL-DT-ST RW/DVD GCC-4480B>Version: C104 - HA 1 TA 0 - 6.6.0.12 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST RW/DVD GCC-4480B D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 509MB (522220kB) Free physical memory: 174MB (178556kB) Memory in use : 65 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.2.2007 Copy disc to image 5:58:04 PM #1 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 5:58:04 PM #2 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc blank or invalid. Need valid original disc. (Medium in drive: Unknown. Medium required by compilation: CD.) 5:58:04 PM #3 Phase 23 File dlgbrnst.cpp, Line 1832 Reading disc aborted Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/22/2005 9:47:25 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Bobbie Jo 1A22-0206-0530-1610-5715-1441* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM Nero Version: 6.6.0.12 Internal Version: 6, 6, 0, 12d (Nero Express) Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.12 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <HL-DT-ST RW/DVD GCC-4480B>Version: C104 - HA 1 TA 0 - 6.6.0.12 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST RW/DVD GCC-4480B D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 509MB (522220kB) Free physical memory: 174MB (179004kB) Memory in use : 65 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.2.2007 Copy disc to image 5:58:26 PM #1 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 5:58:26 PM #2 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc blank or invalid. Need valid original disc. (Medium in drive: Unknown. Medium required by compilation: CD.) 5:58:26 PM #3 Phase 23 File dlgbrnst.cpp, Line 1832 Reading disc aborted Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 7:24:08 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/22/2005 9:47:25 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
I had been using sony DVD-R and was told that I should be using DVD+R I bought the new disks to see if that would help and it didn't still not reading so I sent the drive back to sony AGAIN. I was under the impression that the drive I had bought could use both - and +
1A22-xxxx-xxxx-xxxx-xxxx-xxxx* - EDIT OUT the serial number. As you have more then one burn logged in the logfile there are a few occurrences of the serial number Each time you see ====== *** Nero-Burning Rom, History File *** ====== It is the start of a new log. Most times you only need to post one. edit Try this tool. Try running the Nero ASPI checker tool. You are using a lot of memory when your tring to burn. Cut down on running programs or surfing when burning. 2nd edit I do not see your burner listed on the device map. You have Nero using a Image Recorder.
