1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

cc cam gone

Discussion in 'Digital TV - UK & Europe' started by jhaye2x, Aug 15, 2010.

  1. jhaye2x

    jhaye2x Member

    Joined:
    Jun 19, 2007
    Messages:
    93
    Likes Received:
    1
    Trophy Points:
    16
    hi all, have a dm500s .updated cc cam 2.1.4 from 2.1.2 on the dm500s.one mistake i made was i also config cc cam. when i done this i lost all my programmes.i have ftp through the pc via the dm500s with c-line but no joy. any ideas how to get it back. jhaye2x
     
  2. dub12dave

    dub12dave Regular member

    Joined:
    Apr 18, 2008
    Messages:
    591
    Likes Received:
    1
    Trophy Points:
    28
    Did you try and put ccCam 2.1.2 back on? Why did you try and update to 2.1.4 did you have some sort of problem. Did you set ccCam 2.1.4 as your default.
     
  3. jhaye2x

    jhaye2x Member

    Joined:
    Jun 19, 2007
    Messages:
    93
    Likes Received:
    1
    Trophy Points:
    16
    yes i had a problem.glitching every 20 sec.as the 2.1.4. was the latest cam i put it on.i did set it to the default.i tried putting it back to 2.1.2 no joy..
     
  4. dub12dave

    dub12dave Regular member

    Joined:
    Apr 18, 2008
    Messages:
    591
    Likes Received:
    1
    Trophy Points:
    28
    Are you using dream control centre to enter the cline? Are you getting the FTA channels
     
  5. fintannl

    fintannl Regular member

    Joined:
    Feb 11, 2009
    Messages:
    1,834
    Likes Received:
    9
    Trophy Points:
    48
    the operation of cccam 2.1.2 and 2.1.4 as a client are identical so if you have the same config it should work. glitching, as i found out to endless pain, is primarily due to the lnb not been directed to the central part of your dish. you need to tweak the lnb to get the perfect picture
     
  6. jhaye2x

    jhaye2x Member

    Joined:
    Jun 19, 2007
    Messages:
    93
    Likes Received:
    1
    Trophy Points:
    16
    hi dub12dave,i am getting the fta.i am using pli image.
    jhaye2x
     
  7. jhaye2x

    jhaye2x Member

    Joined:
    Jun 19, 2007
    Messages:
    93
    Likes Received:
    1
    Trophy Points:
    16
    hi fintann,i am uploading the c-line through my enternet cable.or would i have to use a serial cable. when i get it going hopefully i will go on the roof and do ajob on the lnb.. jhaye2x
     
  8. dub12dave

    dub12dave Regular member

    Joined:
    Apr 18, 2008
    Messages:
    591
    Likes Received:
    1
    Trophy Points:
    28
    In dream control centre when you click FTP, and double click 'var' and then doouble click 'etc' then left click and right click on cccam.cfg can you get in to edit? if so re enter your cline, save and exit, then reboot/restart your box, you should be fine.
     
  9. jhaye2x

    jhaye2x Member

    Joined:
    Jun 19, 2007
    Messages:
    93
    Likes Received:
    1
    Trophy Points:
    16
    yes i can edit the config,but where will i upload the c-line into the keys etc. jhaye2x
     
  10. dub12dave

    dub12dave Regular member

    Joined:
    Apr 18, 2008
    Messages:
    591
    Likes Received:
    1
    Trophy Points:
    28

Share This Page