I have posted this message in 3 other sited hoping to get help with this issue. FIRST: I have not been able to load a bin since 151. Ihave been changing keys and that was working up till bin 155. I had to take it to my friend that i got the receiver from and it loaded for them. But they had to use 2.2 loader. When they first tried the 2.4 loader is didn't work but when they tried the 2.2 it worked( first giving them and error message about the file being used but worked). Now i have a straight data cable and if there was nothing going to the receiver then it would not recognize the bin in the receiver. I have checked the com port and it registers on com 1 and notices the bin 156. On another site bin 149 had been working but not all of the channels and when i tried to load it to the receiver nothing happened. First i tried the 2.2 loader and nothing it froze and then i tried the 2.4 and it froze. I increased the bits per second to 115200 and the zero's showed on the receiver and went back to the channel that was on the receiver. I increased the bits per second again to 128000 and then the lines from left to right started that was at 11:00pm and then the lines on the left and the zero's on the right. Since that time 0% has been processed and the time now is 11:53. It should not take that long and i have no idea what the problem is help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I had problems too. I changed to a USB connector and downloaded the USB driver. It works fine now. Marty
