2 questions regarding my first starview 4 usb installation? I did my homework

My box: Starview 4 – N*L Dublin – Ireland

As my box is arriving tomorrow, I did a lot of research, made notes, and looked at all the other peoples headaches, and came up with this list…

Do I understand correctly, I must first load the 1.07 firmware than the logo file onto the box? (Step 12 &13)

And, Do I first scan for channels or do I first go to the secret menu via 1570 on remote?
Step 15-18 first
Or
Step 19-23 first

This is my step-by-step list, but I think I confused myself!


From start to finish….


1. Plug in the starview 4 and attach the cable feed to the cable input on the back of the box.
2. Plug the box in to the TV using the usual scart lead.
3. Download the required firmware for the box
4. Format your usb drive to FAT32
5. Copy logo & bin file to usb drive (copy/paste)
6. Whilst machine is off - Insert the usb pen drive into the usb slot at the back of the box
7. Flick on the power switch also at the back of the box
8. Power the box on with the remote.
9. Now machine is on - press menu on the remote
10. Scroll down to the usb option in menu and hit ok,
11. Here you will see the files on the pen drive.
12. Highlight 1.07firmware file and press ok.
13. Highlight the logo file and press ok.
14. Once the firmware and logo files have loaded onto the box:
15. Go into menu and key in 1570 with the remote,
16. This will bring you to the secret menu.
17. Highlight keycode and change it to ON.
18. Now you’re all set to scan
19. Go back into menu and highlight installation and choose automatic scan hit ok
20. Choose the provider for the area you are in Select the correct one and hit ok.
21. The box should now pick up the desired channels.
22. Exit out and put your box onto a S*y sports
23. Wait for it to update. This may take a while.

Note:
Check your TV settings are set to video output RGB and set to PAL

 

19-21 first then 15-18 then22-23everything else seems ok ,plenty help on here if u need it