I have a pansat 3500SD that gives me a b-70 error when turned on i have been trying for several hours to install the factory bin that i got from the Pansat website. I have tried using both the 3.36 and 3.40 version GTRom loader but still am unable to load the bin file. It starts to load but usually stops at about 50-60 % I have gotten up to 76% then I get a message saying Flash update failed. The only thing that i have not tried is using a different computer. Does anybody have some suggestions PLEASE
The loader should be 3.40 and the bin #122 off the pansatusa.com site. It comes bundled together in 1 zip file. The timing is critical on installing the file. Open the loader with #122 file ready to download to receiver. Receiver hooked to PC--power off at back switch. When everything is ready--hit the loader download button and just a second later--turn on the receiver back power switch. If you get the timing right it should load the file. When the receiver is done, it will reboot and say ON in the display. You may need to try it a few times if the timing isn't right. Let me know how you make out. Jerry
