5.1 surround on the PS3

Discussion in 'PS3 - Modding & Hacking' started by ihaveabu, Mar 10, 2008.

  1. ihaveabu

    ihaveabu Regular member

    Joined:
    Jan 21, 2006
    Messages:
    262
    Likes Received:
    0
    Trophy Points:
    26
    I'm buying an HDTV and a PS3 sometime in the near future.
    The HDTV would def have HDMI, as would the PS3 obviously.

    Another thing I definitely will be doing is hooking up my Dell XPS-M1330 to the HDTV. The laptop comes with HDMI out, so no worries there.

    I currently have the Logitech X-540 5.1 speakers hooked up to my laptop using the Creative Audigy 2NX USB sound card.

    I looked into getting the X-540 to work with the PS3, and it just looks too complicated.

    So...
    i'm strongly considering getting the Logitech z5500 just cuz it has optical input, and it's a pretty awesome set of 5.1s

    my questions for the z5500:

    1. If I hook up the PS3 to it, will it be full 5.1 surround sound?

    2. Can I hook up more than 1 device to the z5500 via optical? It says it supports up to 6 different devices, but the control panel thing only has 1 SPDIF input...

    3. Can I just hook up the z5500 to the TV's optical out, and then use only the HDMI input of the PS3 and my Laptop to get full 5.1 surround on the z5500?



    thanks
     
  2. Ryu77

    Ryu77 Regular member

    Joined:
    Jan 15, 2005
    Messages:
    957
    Likes Received:
    0
    Trophy Points:
    26
    1) Yes, if those Logitech speakers have optical input then you will get true 5.1 surround sound. However, you wont be able to get Dolby TrueHD or PCM 5.1 from Blu-ray discs. Optical doesn't have enough bandwidth for those formats. You can only get the standard Dolby or DTS 5.1.

    2) No, only one digital connection at a time. You will need to swap connections if you want more than one digital connection. I would be guessing that it means 6, as in 1 digital and 5 analog connections.

    3) No, usually a TV's optical out is for the in-built DTV tuner. You can connect the optical out to get digital sound from the DTV tuner but not for other components connected to the TV.
     
    Last edited: Mar 10, 2008
  3. goodswipe

    goodswipe Guest

    Standard Dolby? You mean Dolby Digital, right? ;) When I think standard Dolby, I think of Pro Logic, 2-channel stereo.

    As Ryu said, toslink doesn't have the bandwidth capabilities to carry the new HD audio formats. Is there any way that you can use HDMI? I'd want to take full advantage of those new formats.

    But then again, you probably won't be able to tell the difference unless you have an ultra high end stereo setup.
     
  4. ihaveabu

    ihaveabu Regular member

    Joined:
    Jan 21, 2006
    Messages:
    262
    Likes Received:
    0
    Trophy Points:
    26
    yea, my issue with this is that i don't have enough $ to buy a full TrueHD receiver.

    as long as it has full 5.1 surround, it should probably be fine for me. it won't be true hd, but i know for a fact the z5500 makes everything sound amazing.

    would i be able to do this:
    hook up the ps3 to the z5500 and hook up the z5500 to my audigy 2nx via analog at the same time? this way, if i want to use the ps3, the audigy will be off(not used), and if i want to watch a movie from my laptop, i can just leave the optical from the ps3 plugged in while i use the audigy?

    thanks
     
  5. goodswipe

    goodswipe Guest

    Yes, that should all work as long as they both aren't on at the same time.


    This would only work if the PS3 had 5.1 analog outputs. You can still plug into this using the L and R stereo cables.
     
    Last edited by a moderator: Mar 10, 2008
  6. ihaveabu

    ihaveabu Regular member

    Joined:
    Jan 21, 2006
    Messages:
    262
    Likes Received:
    0
    Trophy Points:
    26
    sweet!!! thanks a lot!
     
  7. Ryu77

    Ryu77 Regular member

    Joined:
    Jan 15, 2005
    Messages:
    957
    Likes Received:
    0
    Trophy Points:
    26
    Yes, I meant Dolby Digital. I did say Dolby 5.1... I assumed most people would know that 5.1 meant Dolby Digital. :)
     
  8. goodswipe

    goodswipe Guest

    Actually, you said DTS 5.1 - LOL!


    You know I'm just given you a hard time my friend! C'ya round the forums. :)

    So did everything work out for you ihaveabu?
     
    Last edited by a moderator: Mar 11, 2008
  9. Ryu77

    Ryu77 Regular member

    Joined:
    Jan 15, 2005
    Messages:
    957
    Likes Received:
    0
    Trophy Points:
    26
    I know you are playing around but I still want to clear up my apparent inadequacies in the English language.

    That is the way you read it, not the way I meant it. I said Dolby or DTS 5.1. I should have been clearer... It's like saying which one is nicer the Red or Black Car?
     
    Last edited: Mar 11, 2008
  10. ihaveabu

    ihaveabu Regular member

    Joined:
    Jan 21, 2006
    Messages:
    262
    Likes Received:
    0
    Trophy Points:
    26
    yea it pretty much clears it up for me. i won't be getting this setup until sometime this summer

    thanks for all the help
     
  11. ihaveabu

    ihaveabu Regular member

    Joined:
    Jan 21, 2006
    Messages:
    262
    Likes Received:
    0
    Trophy Points:
    26
  12. goodswipe

    goodswipe Guest

  13. Ryu77

    Ryu77 Regular member

    Joined:
    Jan 15, 2005
    Messages:
    957
    Likes Received:
    0
    Trophy Points:
    26
    ihaveabu, I was going to suggest that to you earlier but I didn't want to put down something you were about to purchase. My personal opinion is that Logitech sound systems are over priced. For the same $$ you could get a much better set-up from the Home Theater branded equipment.

    Honestly, that Onkyo system will annihilate the Logitech z5500.

    1) The Onkyo system can handle video switching (including HDMI).
    2) Logitech z5500 = 500w, Onkyo HTSR800 = 1000w.
    3) Logitech z5500 = 1 x digital optical, 1 x digital coax, 1 x analog 5.1, 3 x analog 2 channel (this can be switched to another analog 5.1 input). I can't seem to find the input specs on the Onkyo system but I can see on the photo (rear)... Onkyo HTSR800 = 2 x digital optical, 2 x digital coax, 1 x analog 5.1, 4 x analog 2 channel.

    As you can see the Onkyo is better in every department.
     
  14. ihaveabu

    ihaveabu Regular member

    Joined:
    Jan 21, 2006
    Messages:
    262
    Likes Received:
    0
    Trophy Points:
    26
    i'm kinda looking at this from a price standpoint.

    i'll be buying this whole setup sometime this summer (july or so)

    the whole home theater setup does sound appealing. it's also almost twice as much. that said, if it's significantly better, i'll probably get it.

    if i get the home theater setup, would that support the TrueHD or w/e it's called that the z5500 doesn't support?
     
  15. Ryu77

    Ryu77 Regular member

    Joined:
    Jan 15, 2005
    Messages:
    957
    Likes Received:
    0
    Trophy Points:
    26
    They both will support Dolby TrueHD via the analog 5.1 inputs. The player would need to have an on board TrueHD decoder (like the PS3 does) and send the audio via 5.1 analog output. However, the PS3 only has analog stereo out so this wouldn't be an option with the PS3. To get TrueHD from the PS3, you would need to send it via HDMI. To get a TrueHD (HDMI v1.3) capable AV receiver would cost at least $2000+. With that said, you wouldn't notice it with those size speakers anyway. You would need high end speakers before you could hear the difference between standard Dolby Digital and Dolby TrueHD.
     
    Last edited: Mar 12, 2008
  16. ihaveabu

    ihaveabu Regular member

    Joined:
    Jan 21, 2006
    Messages:
    262
    Likes Received:
    0
    Trophy Points:
    26
    ah ok. so this little $400 receiver thing doesn't even support that huh?

     
  17. Ryu77

    Ryu77 Regular member

    Joined:
    Jan 15, 2005
    Messages:
    957
    Likes Received:
    0
    Trophy Points:
    26
    Didn't I just say you can get Dolby TrueHD via the analog 5.1 inputs?

    It is the PS3 that doesn't have analog 5.1. So the only option is to send it via the HDMI cable (optical doesn't have enough bandwidth for TrueHD) to a HDMI v1.3 equipped AV receiver. These are quite expensive ($2000+).

    I think you may have to read my post again. :-D
     
    Last edited: Mar 12, 2008
  18. ihaveabu

    ihaveabu Regular member

    Joined:
    Jan 21, 2006
    Messages:
    262
    Likes Received:
    0
    Trophy Points:
    26
    yea, i was kinda agreeing w/ you there. sorry it wasn't clear.

    i'll look into it more when the summer rolls around.

    thanks for all the replies guys. def helped a lot
     

Share This Page