a780 problem

hi all
just updated my a780 box with filmware 03012011 i've tried search some new channels but my box doesnt pick up any

any suggestions on the solutions?

 

What new channels are you looking for. Turn POWER-SEARCH mode on in menu & put box in standby
overnight to find channels. Check in Prov box menu for correct Prov & NET-ID to use when you
do automatic scan. Using wrong NET-ID will result in scan not finding all channels

 

What new channels are you looking for. Turn POWER-SEARCH mode on in menu & put box in standby
overnight to find channels. Check in Prov box menu for correct Prov & NET-ID to use when you
do automatic scan. Using wrong NET-ID will result in scan not finding all channels

 

all channels ive turned my box on tonight and all the channels vanished with the message "no or bad signal" it was working fine the previous day
did i need to load the latest filmware on the box?

 

It's best to have latest firmware on the box. I assume channels are still there on the list
but are showing message scrambled or no signal. Make sure Prov TV cable is connected to box.
Try turning off router & box Then turn on router & box to solve problem If no channels are listed on box(0000 in display) you need to do an automatic scan to find channels. Make sure to use correct NET-ID for scan
Read E45's guide
http://forums.afterdawn.com/t.cfm/f-59/kryptview_updating_scanning_tutorial-855010/

 

I have tried scanning it and followed the step by step guide but when i scan its doenst find any channels? any suggestions?

 

Are you selecting correct provider & are you getting list of areas to choose from. If so
select your area to scan. If area list is not showing you selected wrong provider or your
Prov TV cable is disconnected somewhere

 

Do a factory default and do a new scan on your box

menu .... installation ...... 0000 ..... factory default.

no or bad signal is your cable unpluged or cut off

 

well ive loaded the latest firmware 03012011, i do an automatic scan and 11 TP's show up but no channels not even the free ones lol on NTL or TELEWEST

I am using a spliiter and connected using lan cable does this matter? I do get a signal because the stength is show up as 59

Im in the wolverhampton area so dont know if it is a prob here any suggestions?

 

Signal needs to be 75+. Check all cables & connections are OK & splitter is connected properly
From splitter you have Prov TV cable connected to box. Check it's in right connection.
If you have Prov box are channels working. Check Prov box for Prov name & NET_ID.
Remove LAN-cable from box before scan. Don't forget to reconnect LAN when channels are found.
Select Provider, scan type-NETWORK, hit GREEN to start scan. Whenlist of areas shows select
your area NET-ID. If you don't find channels start again & select diff ID near to your area
If you have no luck try diff provider & repeat scan procedure
If you still have problem post back exact details

 

The providers box will work on a sh** signal regardless but the Kryptview wont you wont get a proper scan with that signal you need at least 75% on both signal and quality

 

i havent got a providers box, so shall i go to manual search and see which channels give me the best signal? one by one for ntl and telewest?

 

my signal is stuck at 56 even with cable feed out lol it does at times jump to 88

 

You have a problem with Prov TV cable. Signal is too low. You need to resolve this problem or
you will get nowhere. Cable may be damaged or disconnected somewhere. Trace cable back to source to fix problem

 

I suggest you get a min sub from your provider that way your cable feed will be correct you are wasting your time with that signal as it will never work manually or automatically.

 

I suggest you get a min sub from your provider that way your cable feed will be correct you are wasting your time with that signal as it will never work manually or automatically.

 

Does anybody have this problem some of my channels are saying scrambled or no video although the signal strength seems fine. For example no comedy channel but comedy plus 1 is working seems weird as most of them are working.The ones that aren't are there and telling whats on but no picture.Any help would be much appreciated.

 

wrong id maybe regardless of you been able to see the signal

 

It's the right one for glasgow should I try a different one and re scan it's only 3 or 4 channels in the whole box but e 4 is one of them which i think from reading this thread seems strange as i have telly package.

 

well get the one from your box net id from area to area have been moved