acekard 2i on dsixl

i got a new dsixl and acekard 2i.put akio 1.8 and ak 2ifw update 14 dsl on to sd card. got my old ds lite
and updated all ok.when i put the acekard in i got danny phantom and when i sellect this its saying
error any help here please.

 

If your still getting the 'Danny Phantom' logo then you haven't updated your card correctly. You should be using the ak2ifw_update_141_DSi.nds file to update the card from a DS. After sucessfully updating your card you should be getting the 'Alex Rider - Stormrider' logo when used in a DSi.
Make sure your DS is running of the mains or fully charged before updating. Put the ak2ifw_update_141_DSi.nds file on the root of the card, put the Acekard in your DS lite and you should see the update file with your games. Press 'A' to load the update and then press the 'START' button to perform the update. You should then see 'Updating, DO NOT turn off DS' and a progress %. When finished it should say 'Update is done, reboot DS.

Here's a usefull link to setting up the Acekard.
http://gbatemp.net/t218103-updated-n00b-guide-to-setting-up-your-acekard#11

 

thanks for that info i will try the 141 dsi nds file

 

followed all the steps with pjmorie reply still geting the danny phantom and when sellect error comes up.what i did was format the sd card its a 2g selectd fat 32on the fomat.put akaio 1.8 on and then ak2ifw update,got my ds lite selected the ak2ifw update had the charger in just in case and updated 100% succes can you spot what im doing wrong here

 

There are two files , choose the one for DS Lite as you got the DS Lite .

 

If it said 'Update is done, reboot DS' after you ran the update file then it should be OK. Can't see anything wrong with the steps you've done.

 

tried every thing stii danny phantom comeing up must be the card itself.evan when i remove the sd card insert the acekard 2i the danny phantom comes on

 

i get exactly the same thing

 

Here is a link to the Acekard firmware update that I used: http://www.mediafire.com/?i5iacikw9nbpei5
Download and extract folder then copy the ak2ifw_update_141_DSi.nds file onto your SD card and run the update on a DS Lite.

You must use the ak2ifw_update_141_DSi.nds file even though you are using a DS Lite to perform the update.

 

thanks to all for support on this. followed pjmorie last reply and result
it worked

 

Glad to here it worked, the update you were using must have been the update for the 1.4DSi firmware and not the 1.4.1 update.

 

yep cheers worked for me too. think my prob was i was using the dsl file to update through the ds lite???? would still be stuck if you hadnt pointed out use the dsi firmware to update through the lite. cheers fella